␊ |
language: ar.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: لا تثبته على اجهزة الأبل الاصلية .␊ |
codeID: W_Dv␊ |
description: المطورين␊ |
codeID: W_Tt␊ |
description: شكرا ل ␊ |
codeID: W_Pk␊ |
description: الحزمة␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language translated by Mohamed Khairy␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: المخطوطات تمت , و ملف قد @LOG_FILENAME@ يسمى كٌتب لجذر البارتشن المختار من فضلك أقرأه لكى تعرف اذا كان التثبيت تم بنجاح واحتفظ به كتسجيل لما تم .␊ |
file: Description␊ |
codeID: D_01␊ |
description: الشامليون عباره عن مزيج من مختلف مكونات محمل الاقلاع٫ <br />بنى عل ىالتطبيق Fake EFI لصاحبه David Elliott واضيف الى مشروع Apple's boot-132 ٫<br />تم تطوير الشامليون ليضم المميزات التالية␊ |
codeID: D_02␊ |
description: المميزات الجديده فى الشامليون ٢٫٠␊ |
codeID: D_03␊ |
description: - واجهه قابله للتخصيص الكامل لاضافه بعض الالوان لمحمل الاقلاع Darwin ␊ |
codeID: D_04␊ |
description: - اقلاع الاقراص الاصلية عن طريق تحميل صوره ل ramdisk مباشرة دون الحاجه لبرامج اضافية␊ |
codeID: D_05␊ |
description: - السبات Hibernation ٫ استمتع باستئناف الماكنتوش من الحالة السابقه ٫␊ |
codeID: D_06␊ |
description: - امكانيه تعديل القيم المصنعيه ل SMBIOS باستخادم SMBIOS.plist ٫␊ |
codeID: D_07␊ |
description: - امكانيه استخدام DSDT.aml المصححة التى تسطيع حل الكثير من العيوب ␊ |
codeID: D_08␊ |
description: - امكانيه حقن بعض المكونات لكى تعمل عن الطريق device-properties string ٫␊ |
codeID: D_09␊ |
description: - تحتوى على هجين من boot0 / boot1h من اجل الاقراص المقسمة بنظامى MBR . GPT ٫␊ |
codeID: D_10␊ |
description: - تحديد كود الناقل الامامى اوتوماتيكيا حتى مع اخر المعالجات لشركه AMD␊ |
codeID: D_11␊ |
description: - دعم ل Apple Software RAID␊ |
codeID: D_12␊ |
description: - دعم تشغيل كروت الشاشة من nvidia , Ati/AMD␊ |
codeID: D_13␊ |
description: - دعم Module␊ |
codeID: D_14␊ |
description: - الكشف عن الذاكرة مقتبس من ␊ |
codeID: D_15␊ |
description: - Automatic P-State andamp; C-State generation لادارة الطاقة كما يجب ان يكون ␊ |
codeID: D_16␊ |
description: - Message logging.␊ |
codeID: D_17␊ |
description: هذا البرنامج صدر تحت رخضة الاصدار الثانى الهام ل Gnu .␊ |
codeID: D_18␊ |
description: لمزيد من المعلومات قم بزيارة موقعنا␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: دة التخزين بدء التشغيل␊ |
messageName: ERROR_INSTALL␊ |
description: تشن لايفى بمتطلبات هذا التحديث ٫␊ |
messageName: Newer_Package_Installed_message␊ |
description: لبرنام␊ |
messageName: Intel_Mac_message␊ |
description: البرنامج على هذا الكمبيوتر␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: البوت لودر يحتاج اللى ثلاث ملفات (باختصار ) boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: تريد فقط تتبيت الاكسترا␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: تصلة بالجهاز هذه الاضافة غير مدمجه فى trunk الى الان و لها استخدام بسيط بالاضفة فانها تقوم بالتعديل على vesa mode لكروت الشاشة انتل لتحصل على رزليوشن شاشتك اثناء الاقلاع␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Themes␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: بواسطة اختيار اى من هذه الخيارات /Extra/org.chameleon.Boot.plist انشى␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: العاء اى كتبات تظهر فى واجهه البوت مثل رقم نسخة البوت␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: الغاء الواجهه الرسومية للبوت␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: استخدام لوجو شركة ابل الاصلى اثناء بدء التشغيل بدلا من المعدل الذى ياتى مع الثيم␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: يوقف التوبيت بعد ما ان يقوم الشاميلون بعملياته مفيد لو واجهك مشاكل من البوت لودر ٫ ␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: This option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option.␊ |
language: bg.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Do not install to an Apple Macintosh computer␊ |
codeID: W_Dv␊ |
description: Разработенот␊ |
codeID: W_Tt␊ |
description: Благодарности на␊ |
codeID: W_Pk␊ |
description: Package␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language translated by ???␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: The scripts have completed and a file named @LOG_FILENAME@ has been written to the root of your chosen partition. Please read it to find out if the installation was successful and keep it for a record of what was done.␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon е комбинация от разбични boot loader компоненти. Базиран е на fake EFI изпълнението на Дейвид Ейлиът добавено към проекта boot-132 на Apple. Chameleon е разширен със следните ключови функции:␊ |
codeID: D_02␊ |
description: Нови функции в Chameleon 2.0␊ |
codeID: D_03␊ |
description: - Напълно управляем графичен интерфейс за добавяне на живи цветове към Darwin Bootloader.␊ |
codeID: D_04␊ |
description: - Boot-ва retail DVD-та чрез директно зареждане на ramdisk image без помоща на допълнителни програми.␊ |
codeID: D_05␊ |
description: - Хибернация.␊ |
codeID: D_06␊ |
description: - SMBIOS заместване, за да бъдат модифицирани оригиналните SMBIOS стойности.␊ |
codeID: D_07␊ |
description: - DSDT заместване, за да бъде използвано модифицирано DSDT, което решава множество проблеми.␊ |
codeID: D_08␊ |
description: - Вграждане на особеностите на различни хардуерни устройства посредством device-properties стрингове.␊ |
codeID: D_09␊ |
description: - Хибридни boot0 / boot1h за MBR и GPT разделени дискове..␊ |
codeID: D_10␊ |
description: - Автоматично разпознаване на FSB за новите AMD процесори.␊ |
codeID: D_11␊ |
description: - Поддръжка на Apple Software RAID..␊ |
codeID: D_12␊ |
description: - Nvidia and ATI/AMD Graphics Card Enabler.␊ |
codeID: D_13␊ |
description: - Module support␊ |
codeID: D_14␊ |
description: - Memory detection adapted from memtest86:␊ |
codeID: D_15␊ |
description: - Automatic P-State and C-State generation for native power management.␊ |
codeID: D_16␊ |
description: - Message logging.␊ |
codeID: D_17␊ |
description: The code is released under version 2 of the Gnu Public License.␊ |
codeID: D_18␊ |
description: За повече информация посетете␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: Този софтуер трябва да бъде инсталиран на стартовия дял.␊ |
messageName: ERROR_INSTALL␊ |
description: Този дял не отговаря на изискванията за това обновяване.␊ |
messageName: Newer_Package_Installed_message␊ |
description: По нова версия на Chameleon вече е инсталирана.␊ |
messageName: Intel_Mac_message␊ |
description: Софтуерът не може да бъде инсталиран на този компютър.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Стандартно инсталиране на Chameleon␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Теми␊ |
description: Колекция от теми http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: The Bullet тема от NoSmokingBandit␊ |
objectName: Default_title␊ |
objectTitle: Стандартна␊ |
description: Вградената тема в Chameleon.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Опции␊ |
description: Опции по подразбиране␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Премахва графичния интерфейс като добавя GUI=n в com.apple.Boot.plist␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Добавя EHCIacquire=y в com.apple.Boot.plist. Опцията поправя всякакви EHCI (USB 1.0) проблеми поради некоректно написани BIOS-и.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Добавя EthernetBuiltIn=y в com.apple.Boot.plist. Тази опция ще направи 'вградени' вашите Ethernet устройства.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Добавя ForceHPET=y в com.apple.Boot.plist. Пуска в действие HPET при Intel чипсети за BIOS-и, които не разполагат с HPET.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: Добавя ForceWake=y в com.apple.Boot.plist. Опцията позволява да прескочите (да не зареждате) повредени 'изображения' на операционната система.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Добавя UHCIreset=y в com.apple.Boot.plist. Инициализира UHCI (USB 2.0) контролерите преди стартиране на OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Добавя GraphicsEnabler=y в org.chameleon.Boot.plist. Автоматично разпознаване на видео карти с nVidia чипсет и добавяне на съответната за тях информация.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: bs.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Instalacija nije prilagođena za Apple Macintosh kompjutere␊ |
codeID: W_Dv␊ |
description: Programeri␊ |
codeID: W_Tt␊ |
description: Hvala␊ |
codeID: W_Pk␊ |
description: Paket␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language translated by mistudio␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: Skripte su završile i datoteka pod nazivom @LOG_FILENAME@ je snimljena na root particije diska koje ste odabrali. Molimo pročitajte ga kako biste saznali da li je instalacija bila uspiješna i čuvajte ga radi evidencije o tome šta je učinjeno␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon je kombinacija razliƒçitih komponenata bootloadera. On se zasniva na David Elliottovoj la≈ænoj EFI implementaciji dodanoj u Apple boot-132 projekt.␊ |
codeID: D_02␊ |
description: Nove funkcije u Chameleon 2.0␊ |
codeID: D_03␊ |
description: - Potpuno prilagođen grafički korisinički interfejs donosi vizuelna poboljšanja u Darwin Bootloaderu.␊ |
codeID: D_04␊ |
description: - Start sa retail DVD-om direktno učitava ramdisk slike bez pomoći dodatnih programa.␊ |
codeID: D_05␊ |
description: - Hibernacija. Uživajte u nastavaku rada vašeg Mac OS X-a sa pregledom slike.␊ |
codeID: D_06␊ |
description: - SMBIOS zamijena tvorničkih za modificiranu SMBIOS vrijednost.␊ |
codeID: D_07␊ |
description: - DSDT zamijena za korištenje modificiranog, ispravljenog DSDT-a koji može riješiti nekoliko problema.␊ |
codeID: D_08␊ |
description: - Implementacija svojstva uređaja putem svojstva niza.␊ |
codeID: D_09␊ |
description: - hibridni boot0 / boot1h za MBR i GPT particijske diskove.␊ |
codeID: D_10␊ |
description: - automatsko FSB kodno otkrivanje čak i za posljednje AMD procesore. ␊ |
codeID: D_11␊ |
description: - Apple softver RAID podrška.␊ |
codeID: D_12␊ |
description: - Nvidia and ATI/AMD Grafički Aktivator.␊ |
codeID: D_13␊ |
description: - Modul podrška␊ |
codeID: D_14␊ |
description: - Detekcija memorije prilagoƒëena iz memtest86:␊ |
codeID: D_15␊ |
description: - Automatsko generisanje P-State i C-State za izvorno upravljanje energijom.␊ |
codeID: D_16␊ |
description: - Prijava porukama.␊ |
codeID: D_17␊ |
description: Kod je objavljen pod verzijom 2 GNU javna licenca.␊ |
codeID: D_18␊ |
description: Za detaljne informacije posjetite:␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: Ovaj softver mora biti instaliran na volumen sa kojeg se pokreće.␊ |
messageName: ERROR_INSTALL␊ |
description: Ovaj volumen ne ispunjava uslove za ovu nadogradnju.␊ |
messageName: Newer_Package_Installed_message␊ |
description: Nova verzija Chameleona već je instalirana␊ |
messageName: Intel_Mac_message␊ |
description: Ovaj softver ne može biti instaliran na ovom računaru␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon zahtjeva tri bitna fajla. (pojednostavljeno rečeno) boot0 (MBR na disk pogonu) odgovoran za učitavanje boot1. boot1 (Na particiju za boot-sektor) za pronalaženje boot2. boot2 (Na particiju za root direktorij) za učitavanje Kernela itd.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: instalira Chameleon fajlove u početnu datoteku diska (root) odabrane particije koristeći bilo boot0 ili boot0md u zavisnosti od vašeg sistema ne uništavajući bilo kakvu Winodws instalaciju ukoliko je imate instaliranu.␊ |
objectName: noboot_title␊ |
objectTitle: Ne instaliraj Bootloader␊ |
description: Korisno ukoliko želite instalirati samo extra.␊ |
objectName: Module_title␊ |
objectTitle: Chameleon Moduli␊ |
description: Moduli ugrađeni u sistem Cameleona omogućavaju korisniku ili programeru proširenje funkcionalnosti Cameleon jezgre bez zamijene glavnog boot fajla. ␊ |
objectName: AutoReso_title␊ |
objectTitle: Rezolucija␊ |
description: Ovaj modul čita edid informacije sa monitora priključenog na glavni ekran. Modul trenutno nije integrisan u trunk i nije od velike primjene kao što stoji. Osim toga, modul će zakrpati VESA modove koji su prisutni u pred Intelovim HD grafičkim karticama kako bi osigurale odgovarajuću rezoluciju ekrana prilikom podizanja.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: Ovaj modul omogućava standard c biblioteku za module za povezivanje ako chameleon biblioteka nije dovoljna. Ovo se trenutno koristi samo sa uClibc++ bibliotekom. Izvor: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: Ovaj modul omogućava minimalističku c++ runtime biblioteku za korištenje u drugim modulima. To ne pruža funkcionalnost sama po sebi, umjesto toga, služi kako bi se omogućilo korištenje c++ jezika u ostalim modulima. Imajte na umu da su obe RTTI iznimke onemogućene. Izvor: http://cxx.uclibc.org/ Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Korištenje tastature za Njemačku Mac tastaturu␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Korištenje tastature za Španjolsku Mac tastaturu␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Korištenje tastature za Francusku Mac tastaturu␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Korištenje tastature za Italijansku Mac tastaturu␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Korištenje tastature za Svedsku Mac tastaturu␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Korištenje tastature za Francusku PC tastaturu␊ |
objectName: Themes_title␊ |
objectTitle: Themes␊ |
description: Skup predloženih tema Više tema možete pronaći na http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: Predivna jednostavna tema od NoSmokingBandit iz Aprila 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleonova trenutno zadana tema.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: Manja, jednostavnija verzija nove zadane teme koja se koristi prilikom izgradnje Chameleon-a koji zahtjeva ugrađenu temu.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleonova prethodno zadana tema.␊ |
objectName: Options_title␊ |
objectTitle: Boot Opcije␊ |
description: Kreira /Extra/org.chameleon.Boot.plist i omogučava izbor željene opcije za kontrolu Chameleon postavki.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Opcije za kontrolu rada Chameleona.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Skriva Cameleon boot banner u grafičkom korisničkom inferfejsu (GUI).␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Onemogućava uključeni zadani korisnički grafički interfejs.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Koristite legacy (sivi i bijeli) apple logo prilikom podizanja radije nego boot.png sliku iz teme␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: Prikaz zaslona za odabir particije bez prikazivanja timeout ekrana.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Omogućava mod mirnog pokretanja (bez poruka ili redaka).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Onemogućava prikaz detalja o particiji i rezoluciji.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauzira boot proces nakon što je Cameleon završio postavljanje, onda čeka na pritisak tipke prije nego se pokrene mach kernel. Korisno u kombinaciji sa verbose podizanjem za riješavanje problema.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Izaberite od selekcije iz baze opcija.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Pokreće jezgru (kernel) u 32bitnom modu radije nego u zadanom 64bitnom modu.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Omogućava opciju za popravak bilo kojih EHCI vlasničkih prava zbog lošeg biosa.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Omogućava mogućnost dodavanja "ugrađeno" na vaše Ethernet uređaje.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Omogućava HPET na Intel čipsetima, za biose koje ne uključuju ovu opciju.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: Ova opcija omogućava vam da zaobiđete loše uspavane slike (sleep images).␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Isključuje automatsko omogućavanje restart fix opcije␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Omogućava opciju za reset UHCI kontrolera prije početka podizanja. ␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Isključuje omogućeno automatsko RAM prepoznavanje.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: Samo za Lion. Omogućava učitavanje prethodno povezanog kernela. Ovo će ignorisati /E/E i /S/L/E. Ovo koristiti samo ako morate znati da sadrži sve što vam je potrebno.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Pokušava da učita uspavanu sliku snimljenu iz prethodne hibernacije␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Izaberite od selekcije iz kernel zastava.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Uključuje verbose prijavu i omogućava vam da vidite poruke iz oba Chameleon i kernel OS X prilikom pokretanja. Osnova za rješavanje problema.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: Opcija za rješavanje problema koja se koristi za dizanje OS X BSD / Unix komandnog reda.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Opcija koja nije potrebna za svakodnevno podizanje, ali može biti korisna ako želite da OS X učita sve fajlove iz sistemskog direktorija, radije nego se oslanjajući na pre-izgrađenu predmemoriju.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: Postavlja zastave npci = 0x2000 za Kernel Zastave␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Samo Lion. Isključuje 'low power wake' opciju koja ponekad ostavi crni ekran posije buđenja iz spavanja.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: Odabir opcija koje se bave upravljanjem potrošnjom energije i SpeedStepom.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Nova C-state _CST generacija metodom SystemIO registracije umjesto FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Odbacuje SSDT tablice ugrađene na matičnoj ploči.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Uključuje posebno Processorsko stanje napajanja, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Uključuje posebno Processorsko stanje napajanja, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Uključuje posebno Processorsko stanje napajanja, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Uključuje automatsko generisanje procesora u stanju mirovanja (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Omogućava automatsko generisanje snage procesora stanja performansi (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Postavlja rezoluciju ekrana za vaš monitor␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Postavite Grafički Mod na 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Postavite Grafički Mod na 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Postavite Grafički Mod na 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Postavite Grafički Mod na 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Postavite Grafički Mod na 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Postavite Grafički Mod na 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Postavite Grafički Mod na 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Postavite Grafički Mod na 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Postavite Grafički Mod na 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Postavite Grafički Mod na 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Postavite Grafički Mod na 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: Odabir opcija koje se bave s videom.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Omogućava opciju auto prepoznavanja NVIDIA baziranih grafičkih video kartica i upisuje pravilne informacije o istoj.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Uključuje UseAtiROM opciju.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Uključuje UseNvidiaROM opciju.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Uključuje VBIOS opciju␊ |
language: de.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Achtung ! Nicht auf einem Apple Macintosh Computer Installieren␊ |
codeID: W_Dv␊ |
description: Entwickler␊ |
codeID: W_Tt␊ |
description: Dank␊ |
codeID: W_Pk␊ |
description: Package␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language translated by iXabbu, olegischinski and NextMac␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: Die Scripts wurden ausgeführt und eine Datei genannt @LOG_FILENAME@ wurde ins Rootverzeichnis deiner ausgesuchten Partition geschrieben. Bitte lese die Datei um herauszufinden ob die Installation erfolgreich war. Behalte die Datei um nachzuschauen was getan wurde.␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon ist eine Kombination verschiedener Bootloader Komponenten. Als Basis diente David Elliott's fake EFI Implementierung die zu Apple's boot-132 Projekt hinzugefügt wurde. Chameleon wurde mit folgenden Hauptmerkmalen erweitert:␊ |
codeID: D_02␊ |
description: Neue Funktionen in Chameleon 2.0 :␊ |
codeID: D_03␊ |
description: - Vollständig anpassbare GUI um etwas Farbe in den Darwin Bootloader zu bringen.␊ |
codeID: D_04␊ |
description: - Starten von retail DVDs durch direktes Laden eines RAM-Disk Images, ohne zusätzliche Programme zu benötigen .␊ |
codeID: D_05␊ |
description: - Ruhezustand. Genießt Mac OS X mit einem Vorschau-Bild aufzuwecken.␊ |
codeID: D_06␊ |
description: - SMBIOS Override um vorgegebene SMBIOS Werte anzupassen.␊ |
codeID: D_07␊ |
description: - DSDT Override um eine angepasste DSDT, die verschiedene Probleme beheben kann, zu laden.␊ |
codeID: D_08␊ |
description: - Device Property Injection über device-properties string.␊ |
codeID: D_09␊ |
description: - hybrider boot0 / boot1h für MBR und GPT partitionierte Festplatten.␊ |
codeID: D_10␊ |
description: - Code zur automatischen FSB Erkennung, selbst für AMD CPUs.␊ |
codeID: D_11␊ |
description: - Apple Software RAID Unterstützung.␊ |
codeID: D_12␊ |
description: - Nvidia and ATI/AMD Graphics Card Enabler.␊ |
codeID: D_13␊ |
description: - Module support␊ |
codeID: D_14␊ |
description: - Speicher Erkennung angepasst von memtest86: http://www.memtest.org␊ |
codeID: D_15␊ |
description: - Automatische P-State and C-State generation für native power management.␊ |
codeID: D_16␊ |
description: - Message logging.␊ |
codeID: D_17␊ |
description: The code is released under version 2 of the Gnu Public License.␊ |
codeID: D_18␊ |
description: Für weitere Informationen besuche␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: Diese Software muss auf dem Startlaufwerk installiert werden.␊ |
messageName: ERROR_INSTALL␊ |
description: Dieses Laufwerk ist nicht für dieses Update geeignet.␊ |
messageName: Newer_Package_Installed_message␊ |
description: Es ist bereits eine neuere Version dieses Pakets installiert.␊ |
messageName: Intel_Mac_message␊ |
description: Diese Software kann auf diesem Computer nicht installiert werden.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon benötigt drei wesentliche Dateien. (einfach gesprochen) boot0 (im MBR der Festplatte) verantwortlich für das Laden von boot1. boot1 (im Bootsektor der Zielpartition) findet boot2. boot2 (root-Verzeichnis der Partition) lädt den Kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Installiert die drei wesentlichen Dateien und schreibt dabei boot0 in die ersten 440 Byte des MBR, so dass kein existierender Windows-Code überschrieben wird. boot0 sucht dann nach boot1h auf der ersten aktiven Partition. * Diese Option setzt die Zielpartition auf aktiv.␊ |
objectName: noboot_title␊ |
objectTitle: Keines␊ |
description: Chameleon nicht installieren (hilfreich wenn nur Extra-Komponenten installiert werden sollen)␊ |
objectName: Module_title␊ |
objectTitle: Chameleon Module␊ |
description: Das in Chameleon integrierte Modulsystem ermöglicht es dem Benutzer/Entwickler, die Hauptfunktionen von Chameleon zu erweitern ohne die eigentliche boot Datei zu verändern.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: Dieses Modul stellt eine Standard C-Bibliothek für Module bereit, falls die von Chameleon bereitgestellte Bibliothek nicht ausreicht. Im Moment wird dies nur von der uClibc++ Bibliothek genutzt. Quelldatei: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: Dieses Modul stellt eine vereinfachte c++ Bibliothek für Module bereit. Eine Funktionalität ist nicht von alleine gegeben, es ermöglicht lediglich, c++ Programmiersprache in anderen Modulen zu verwenden. Bitte daran denken das sowohl 'rtti' als auch 'Ausnahmen' deaktiviert wurden. Quelldatei: http://cxx.uclibc.org/ . Abhängigkeiten: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Tastaturbelegung␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Tastaturbelegung: Deutsch Mac␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Tastaturbelegung: Spanisch Mac␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Tastaturbelegung: Französisch Mac␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Tastaturbelegung: Italienisch Mac␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Tastaturbelegung: Schwedisch Mac␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Tastaturbelegung: Französisch PC␊ |
objectName: Themes_title␊ |
objectTitle: Erscheinungsbild␊ |
description: Eine Sammlung verschiedener Themen. Weitere Themen gibt es hier: http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: Das Bullet-Thema von NoSmokingBandit␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Das neue Standard-Thema␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: Vereinfachte Version des neuen Standard-Themas, nutzbar wenn für Chameleon ein eingebettetes Thema benötigt wird.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Das bisherige Standard-Thema␊ |
objectName: Options_title␊ |
objectTitle: Optionen␊ |
description: Erstellt eine org.chameleon.Boot.plist in /Extra und setzt die nachfolgend gewählten Schlüssel zur Steuerung von Chameleon.␊ |
objectName: Control_title␊ |
objectTitle: Kontrolloptionen␊ |
description: Einstellungen zur Kontrolle von Chameleon.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=Nein␊ |
description: Kein Chameleon-Banner im Startbild.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=Nein␊ |
description: Deaktiviert die graphische Oberfläche beim Booten.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Ja␊ |
description: Nutzt das Apple Startbild beim Booten (nicht das boot.png des Themas).␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Ja␊ |
description: Zeigt die Partitionsauswahl ohne Wartezeit.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Ja␊ |
description: Bootet ohne Verlaufsmeldungen.␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Ja␊ |
description: Aktiviert die Anzeige der Partition und Details der Bildschirmauflösung.␊ |
objectName: Wait_title␊ |
objectTitle: Warten=Ja␊ |
description: Stoppt den Bootprozess nach der Chameleon-Routine und lädt den mach_kernel erst nach Drücken einer beliebigen Taste. Hilfreich bei der Fehlersuche in Kombination mit dem Booten im Text-Modus.␊ |
objectName: General_title␊ |
objectTitle: Basisoptionen␊ |
description: Auswahl an Basisoptionen.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Bootet den Kernel im 32bit Modus (Standard ist 64bit).␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Ja␊ |
description: Versucht Zugriffsprobleme des EHCI-Controllers bei fehlerhaftem BIOS zu lösen.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Ja␊ |
description: Lässt die Netzwerkkarte als 'built-in' erscheinen.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Ja␊ |
description: Versucht HPET bei Intel-Chipsätzen zu aktivieren, falls das BIOS diese Einstellung nicht bietet.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Ja␊ |
description: Versucht das Aufwachen bei fehlerhaftem Image des letzten Ruhezustandes zu erzwingen.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=Nein␊ |
description: Übergeht die Anwendung des Restart-Fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Ja␊ |
description: Führt ein 'Reset' des UHCI-Controllers vor dem Start von OS X aus.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: Benutze MemDetect=Nein␊ |
description: Übergeht die automatische Erkennung des Arbeitsspeichers.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Ja␊ |
description: Nur für Lion. Aktiviert das Laden des pre-linked kernel. Treiber in /E/E und /S/L/E werden ignoriert. Nur benutzen, wenn damit alles Notwendige geladen werden kann.␊ |
objectName: Wake_title␊ |
objectTitle: Aufwachen=Ja␊ |
description: Versucht das Image des letzten Ruhezustands (Hibernation) zu laden.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Auswahl an kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Meldungen von Chameleon und OS X Kernel werden während des Bootens angezeigt. Wichtig zur Fehlerdiagnose.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: Zur Fehlerbehebung in die BSD/Unix Kommandozeile von OS X booten.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Nicht für den täglichen Gebrauch, aber hilfreich, um OS X alle Systemdateien unter Umgehung der Caches laden zu lassen.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: Behebt manchmal den Fehler 'PCI Configuration Failed' ␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Nur für Lion. Verhindert das 'low power wake', wodurch manchmal der Monitor nach dem Aufwachen aus dem Ruhezustand schwarz bleibt.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Energieverwaltung␊ |
description: Optionen zur Energieverwaltung und CPU-Taktung.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Ja␊ |
description: Überspringt das Einlesen der SSDT-Tabellen des BIOS.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Ja␊ |
description: C2 ermöglichen.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Ja␊ |
description: C3 ermöglichen.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Ja␊ |
description: C4 ermöglichen.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Ja␊ |
description: Generiert automatisch die C-States des Prozessors.␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Ja␊ |
description: Generiert automatisch die P-States des Prozessors.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Die neue - Generate C-States=Ja␊ |
description: Die neue C-State _CST Erzeugungsmethode erfordert das Benutzen von SystemIO Registern an Stelle von FixedHW.␊ |
objectName: Resolution_title␊ |
objectTitle: Bildschirmauflösung␊ |
description: Setzt die Bildschirmauflösung für den Bootprozess.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Setzt die Bildschirmauflösung auf 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Setzt die Bildschirmauflösung auf 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Setzt die Bildschirmauflösung auf 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Setzt die Bildschirmauflösung auf 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Setzt die Bildschirmauflösung auf 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Setzt die Bildschirmauflösung auf 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Setzt die Bildschirmauflösung auf 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Setzt die Bildschirmauflösung auf 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Setzt die Bildschirmauflösung auf 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Setzt die Bildschirmauflösung auf 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Setzt die Bildschirmauflösung auf 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: Optionen zur Grafik.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Ja␊ |
description: Nutzt die automatische Erkennung von NVIDIA-Grafikchipsätzen. Zusätzliche Injektoren sind obsolet.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: Benutze AtiROM=Ja␊ |
description: Nutzt ein AtiROM.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: Benutze NvidiaROM=Ja␊ |
description: Nutzt ein NvidiaROM.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Ja␊ |
description: Nutzt VBIOS.␊ |
language: el.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Do not install to an Apple Macintosh computer␊ |
codeID: W_Dv␊ |
description: Developers␊ |
codeID: W_Tt␊ |
description: Thanks to␊ |
codeID: W_Pk␊ |
description: Package␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language translated by ???␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: The scripts have completed and a file named @LOG_FILENAME@ has been written to the root of your chosen partition. Please read it to find out if the installation was successful and keep it for a record of what was done.␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon is a boot loader built using a combination of components which evolved from the development of David Elliott's fake EFI implementation added to Apple's boot-132 project.␊ |
codeID: D_02␊ |
description: Chameleon v2 is extended with many features. For example:␊ |
codeID: D_03␊ |
description: - Fully customizable GUI to bring some color to the Darwin Bootloader.␊ |
codeID: D_04␊ |
description: - Load a ramdisk to directly boot retail DVDs without additional programs.␊ |
codeID: D_05␊ |
description: - Hibernation. Enjoy resuming your Mac OS X with a preview image.␊ |
codeID: D_06␊ |
description: - SMBIOS override to modify the factory SMBIOS values.␊ |
codeID: D_07␊ |
description: - DSDT override to use a modified fixed DSDT which can solve several issues.␊ |
codeID: D_08␊ |
description: - Device Property Injection via device-properties string.␊ |
codeID: D_09␊ |
description: - hybrid boot0 / boot1h for MBR and GPT partitioned disks.␊ |
codeID: D_10␊ |
description: - Automatic FSB detection code even for recent AMD CPUs.␊ |
codeID: D_11␊ |
description: - Apple Software RAID support.␊ |
codeID: D_12␊ |
description: - Nvidia andamp; ATI/AMD Graphics Card Enabler.␊ |
codeID: D_13␊ |
description: - Module support␊ |
codeID: D_14␊ |
description: - Memory detection adapted from memtest86:␊ |
codeID: D_15␊ |
description: - Automatic P-State and C-State generation for native power management.␊ |
codeID: D_16␊ |
description: - Message logging.␊ |
codeID: D_17␊ |
description: The code is released under version 2 of the Gnu Public License.␊ |
codeID: D_18␊ |
description: FAQ's:␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: ŒòŒ≠ŒºŒ±œÑŒ±␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: en.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Do not install to an Apple Macintosh computer␊ |
codeID: W_Dv␊ |
description: Developers␊ |
codeID: W_Tt␊ |
description: Thanks to␊ |
codeID: W_Pk␊ |
description: Package␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language translated by blackosx␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: The scripts have completed and a file named @LOG_FILENAME@ has been written to the root of your chosen partition. Please read it to find out if the installation was successful and keep it for a record of what was done.␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon is a boot loader built using a combination of components which evolved from the development of David Elliott's fake EFI implementation added to Apple's boot-132 project.␊ |
codeID: D_02␊ |
description: Chameleon v2 is extended with many features. For example:␊ |
codeID: D_03␊ |
description: - Fully customizable GUI to bring some color to the Darwin Bootloader.␊ |
codeID: D_04␊ |
description: - Load a ramdisk to directly boot retail DVDs without additional programs.␊ |
codeID: D_05␊ |
description: - Hibernation. Enjoy resuming your Mac OS X with a preview image.␊ |
codeID: D_06␊ |
description: - SMBIOS override to modify the factory SMBIOS values.␊ |
codeID: D_07␊ |
description: - DSDT override to use a modified fixed DSDT which can solve several issues.␊ |
codeID: D_08␊ |
description: - Device Property Injection via device-properties string.␊ |
codeID: D_09␊ |
description: - hybrid boot0 / boot1h for MBR and GPT partitioned disks.␊ |
codeID: D_10␊ |
description: - Automatic FSB detection code even for recent AMD CPUs.␊ |
codeID: D_11␊ |
description: - Apple Software RAID support.␊ |
codeID: D_12␊ |
description: - Nvidia andamp; ATI/AMD Graphics Card Enabler.␊ |
codeID: D_13␊ |
description: - Module support␊ |
codeID: D_14␊ |
description: - Memory detection adapted from memtest86:␊ |
codeID: D_15␊ |
description: - Automatic P-State and C-State generation for native power management.␊ |
codeID: D_16␊ |
description: - Message logging.␊ |
codeID: D_17␊ |
description: The code is released under version 2 of the Gnu Public License.␊ |
codeID: D_18␊ |
description: FAQ's:␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Themes␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: es.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: No lo instale en un ordenador Apple Macintosh␊ |
codeID: W_Dv␊ |
description: Programadores␊ |
codeID: W_Tt␊ |
description: Gracias a␊ |
codeID: W_Pk␊ |
description: Paquete␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language traducido por juanerson␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: Los scripts se han completado y un archivo de nombre @LOG_FILENAME@ ha sido escrito en la raíz de la partición seleccionada. Por favor léalo para saber si la instalación fue exitosa y mantener un registro de lo que se hizo.␊ |
file: Description␊ |
codeID: D_01␊ |
description: El Bootloader Chameleon es la combinación de varios componentes. Esta basado en la implementación EFI falsa de David Elliott, incorporada al método Boot-132, a partir del proyecto de código abierto Darwin de Apple␊ |
codeID: D_02␊ |
description: Entre las Novedades en Chameleon v2 se encuentran muchas funciones extendidas, por ejemplo:␊ |
codeID: D_03␊ |
description: - Interfaz GUI totalmente personalizada para brindarle más colorido al Dawin Bootloader.␊ |
codeID: D_04␊ |
description: - Booteo de DVDs con simplemente cargar una imagen ramdisk sin la ayuda de programas adicionales.␊ |
codeID: D_05␊ |
description: - Hibernación. Disfrute reanudar su MAC OS X con una imagen de muestra.␊ |
codeID: D_06␊ |
description: - Anulación de SMBIOS, para modificar los valores de fábrica SMBIOS.␊ |
codeID: D_07␊ |
description: - Anulación de DSDT, para usar un DSDT modificado y arreglado capaz de resolver varios inconvenientes.␊ |
codeID: D_08␊ |
description: - Inyección de Propiedades de Dispositivos a través de EFI strings.␊ |
codeID: D_09␊ |
description: - Permite el arranque de esquemas híbridos boot0 / boot1h, para discos particionados en MBR y GPT.␊ |
codeID: D_10␊ |
description: - Detección automática de frecuencia FSB para CPUs AMD recientes.␊ |
codeID: D_11␊ |
description: - Soporte para Software RAID de Apple.␊ |
codeID: D_12␊ |
description: - Habilitación de soporte para Gráficas Nvidia and ATI/AMD.␊ |
codeID: D_13␊ |
description: - Soporte de carga por Módulos.␊ |
codeID: D_14␊ |
description: - Detección de Memoria adaptada desde memtest86: http://www.memtest.org␊ |
codeID: D_15␊ |
description: - Generación automática de P-States and C-States para gestión de energía nativa.␊ |
codeID: D_16␊ |
description: - Registro de Mensajes.␊ |
codeID: D_17␊ |
description: El código está liberado bajo la versión 2 de la Licencia Pública GNU.␊ |
codeID: D_18␊ |
description: Para información más detallada, preguntas y respuestas visitar:␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: Este software debe ser instalado en el volumen de inicio.␊ |
messageName: ERROR_INSTALL␊ |
description: Este volumen no cumple con los requisitos necesarios para esta actualizaci√≥n␊ |
messageName: Newer_Package_Installed_message␊ |
description: Una versi√≥n m√°s reciente de Chameleon ya ha sido instalada.␊ |
messageName: Intel_Mac_message␊ |
description: Este software no puede ser instalado en este ordenador.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Temas␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: fr.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Ne pas installer sur un ordinateur Apple Macintosh␊ |
codeID: W_Dv␊ |
description: Développeurs␊ |
codeID: W_Tt␊ |
description: Merci à␊ |
codeID: W_Pk␊ |
description: Package d'installation␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language traduit par Tenval␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: Les scripts sont terminés et un fichier nommé @LOG_FILENAME@ a été écrit à la racine de la partition choisie. SVP lisez le pour savoir si l'installation est un succes et garder un rapport de ce qui a été fait..␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon est un chargeur d'amorçage construit en utilisant une combinaison de composants qui a elle même évoluée à partir du développement de l'implémentation "fake EFI" de David Elliott, qui a été ajoutée au projet boot-132 d'Apple.␊ |
codeID: D_02␊ |
description: Chameleon v2 a été, au fur et à mesure, mis à jour avec nombre de fonctions :␊ |
codeID: D_03␊ |
description: - Interface utilisateur customisable, pour donner un peu de piment au chargeur d'amorçage Darwin.␊ |
codeID: D_04␊ |
description: - Chargement possible d'un "RAMDisk" pour pouvoir démarrer un DVD officiel de Mac OS X sans logiciels tiers.␊ |
codeID: D_05␊ |
description: - Mise en veille prolongée. Permet de reprendre votre session de travail instantanément via une image d'hibernation.␊ |
codeID: D_06␊ |
description: - Prise en charge d'un SMBIOS modifié. Permet d'outrepasser le SMBIOS d'origine de votre machine.␊ |
codeID: D_07␊ |
description: - Prise en charge d'un DSDT modifié. Permet d'appliquer un DSDT patché et résoudre beaucoup de problèmes.␊ |
codeID: D_08␊ |
description: - Injection des propriétés de périphériques via une chaîne de caractère "device-properties".␊ |
codeID: D_09␊ |
description: - Fichiers boot0 et boot1h hybrides. Permet l'utilisation de disques partitionés en MBR ou GPT.␊ |
codeID: D_10␊ |
description: - Detection automatique du FSB, même pour les processeurs AMD récents.␊ |
codeID: D_11␊ |
description: - Support du RAID Logiciel d'Apple.␊ |
codeID: D_12␊ |
description: - Activateur graphique Nvidia and ATI/AMD intégré.␊ |
codeID: D_13␊ |
description: - Support de modules (extensions de Chameleon).␊ |
codeID: D_14␊ |
description: - Détection mémoire adaptée de memtest86 : http://www.memtest.org␊ |
codeID: D_15␊ |
description: - Génération automatique des P-State and C-State pour␊ |
codeID: D_16␊ |
description: - Journalisation des messages console.␊ |
codeID: D_17␊ |
description: Le code est publié sous la version 2 de la licence GPL (Gnu Public License).␊ |
codeID: D_18␊ |
description: Questions fréquentes (en anglais):␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Th√®mes␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: he.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Do not install to an Apple Macintosh computer␊ |
codeID: W_Dv␊ |
description: Developers␊ |
codeID: W_Tt␊ |
description: Thanks to␊ |
codeID: W_Pk␊ |
description: Package␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language translated by ???␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: The scripts have completed and a file named @LOG_FILENAME@ has been written to the root of your chosen partition. Please read it to find out if the installation was successful and keep it for a record of what was done.␊ |
file: Description␊ |
codeID: D_01␊ |
description: חמליאון זה שילוב של רכיבי בוטלודרים שונים. הוא מבוסס על יישום fake EFI של David Elliott לפרויקט boot-132 של אפל. חמליאון מגיע עם תכונות עיקריות הבאות:␊ |
codeID: D_02␊ |
description: תכונות חדשות בחמליאון גרסה 2.0␊ |
codeID: D_03␊ |
description: - ממשק משתמש בעל התאמה אישית מלאה שמביאה צבעים לDarwin Bootloader.␊ |
codeID: D_04␊ |
description: - התחול דיסק התקנת OSX ריטייל על ידי העלאת ramdisk בלי להיעזר בתכנות נוספות.␊ |
codeID: D_05␊ |
description: - היברנציה. ליהנות מחזרת המערכת שלך ממצב היברנציה בעזרת preview image.␊ |
codeID: D_06␊ |
description: - עקיפת SMBIOS לשינוי ערכי מפעל של נתוני SMBIOS.␊ |
codeID: D_07␊ |
description: - עקיפת DSDT לשימוש בDSDT בהתאמה אישית אשר יכול לפתור מספר בעיות.␊ |
codeID: D_08␊ |
description: - אינג'קשן של Device Property באמצעות device-properties string.␊ |
codeID: D_09␊ |
description: - היבריד של boot0/boot1h לכוננים המחולקים בשיטות MBR ו GPT.␊ |
codeID: D_10␊ |
description: - קוד זיהוי אוטומטי של FSB אפילו למעבדי AMD החדשים.␊ |
codeID: D_11␊ |
description: - תמיכה בApple Software RAID.␊ |
codeID: D_12␊ |
description: - Nvidia and ATI/AMD Graphics Card Enabler.␊ |
codeID: D_13␊ |
description: - Module support␊ |
codeID: D_14␊ |
description: - Memory detection adapted from memtest86: http://www.memtest.org␊ |
codeID: D_15␊ |
description: - Automatic P-State and C-State generation for native power management.␊ |
codeID: D_16␊ |
description: - Message logging.␊ |
codeID: D_17␊ |
description: The code is released under version 2 of the Gnu Public License.␊ |
codeID: D_18␊ |
description: לקבלת מידע נוסף, אנא בקרו ב: ␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Themes␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: hr.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Instalacija nije prilagođena za Apple Macintosh računala␊ |
codeID: W_Dv␊ |
description: Programeri␊ |
codeID: W_Tt␊ |
description: Hvala␊ |
codeID: W_Pk␊ |
description: Paket␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language translated by mistudio␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: Skripte su završene i mapa pod nazivom @LOG_FILENAME@ je snimljena u korijen particije diska koje ste odabrali. Molimo pročitajte kako biste saznali da li je instalacija bila uspiješna i čuvajte log radi evidencije o tome šta je učinjeno.␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon je kombinacija različitih komponenti bootloadera. On je zasnovan na David Elliottovoj lažnoj EFI implementaciji dodanoj u Apple boot-132 projekt.␊ |
codeID: D_02␊ |
description: Nove funkcije u Chameleon 2.0␊ |
codeID: D_03␊ |
description: - Potpuno prilagođen grafičko korisiničko sučelje donosi vizuelna poboljšanja u Darwin Bootloaderu.␊ |
codeID: D_04␊ |
description: - Start sa retail DVD-om direktno učitava ramdisk slike bez pomoći dodatnih programa.␊ |
codeID: D_05␊ |
description: - Hibernacija. Uživajte u nastavaku rada vašeg Mac OS X-a sa pregledom slike.␊ |
codeID: D_06␊ |
description: - SMBIOS zamijena tvorničkih za modifikovanu SMBIOS vrijednost.␊ |
codeID: D_07␊ |
description: - DSDT zamijena za korištenje modifikovanog, ispravljenog DSDT-a koji može riješiti nekoliko problema.␊ |
codeID: D_08␊ |
description: - Implementacija svojstva uređaja putem svojstva niza.␊ |
codeID: D_09␊ |
description: - hibridni boot0 / boot1h za MBR i GPT particijske diskove.␊ |
codeID: D_10␊ |
description: - automatsko FSB kodno otkrivanje čak i za posljednje AMD procesore. ␊ |
codeID: D_11␊ |
description: - Apple softver RAID podrška.␊ |
codeID: D_12␊ |
description: - Nvidia and ATI/AMD Grafički Aktivator.␊ |
codeID: D_13␊ |
description: - Modul podrška␊ |
codeID: D_14␊ |
description: - Detekcija memorije prilagođena iz memtest86: http://www.memtest.org␊ |
codeID: D_15␊ |
description: - Automatsko generiranje P-State i C-State za izvorno upravljanje energijom.␊ |
codeID: D_16␊ |
description: - Prijava porukama.␊ |
codeID: D_17␊ |
description: Kod je objavljen pod verzijom 2 GNU javna licenca.␊ |
codeID: D_18␊ |
description: Za detaljne informacije posjetite:␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Themes␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: id.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Jangan dinstall Apple Macintosh ASLI␊ |
codeID: W_Dv␊ |
description: Tim pengembang␊ |
codeID: W_Tt␊ |
description: Berterima kasih kepada␊ |
codeID: W_Pk␊ |
description: Pakete␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language translated by Rudolf Tingginehe and Babiloe␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: Skrip ini telah selesai dan telah disematkan pada berkas @LOG_FILENAME@ yang ditaruh di direktori utama dari partisi yang terinstall. Silahkan baca berkas itu dan perhatikan apakah instalasi telah sukses, dan simpan berkas tersebut jika selesai.␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon adalah kombinasi dari berbagai macam komponen boot loader. Berbasiskan implementasi EFI palsu oleh David Elliott yang ditambahkan pada proyek Apple’s Boot-132␊ |
codeID: D_02␊ |
description: Fitur terbaru di Chameleon 2.0␊ |
codeID: D_03␊ |
description: - GUI yang dapat diubah-suaikan dengan bebas untuk mewarnai Bootloader Darwin.␊ |
codeID: D_04␊ |
description: - Jalankan DVD retail secara langsung dengan memuat sebuah image ramdisk tanpa bantuan program lain.␊ |
codeID: D_05␊ |
description: - Hibernasi. Nikmati melanjutkan pekerjaan pada Mac OS X anda dengan “pratinjau image”.␊ |
codeID: D_06␊ |
description: - SMBIOS override unutk memodifikasi SMBIOS bawaan.␊ |
codeID: D_07␊ |
description: - DSDT override unutk menggunakan modifikasi tertentu dari DSDT yang dapat menyelesaikan isu-isu tertentu.␊ |
codeID: D_08␊ |
description: - Device Property Injection melalui string device-properties.␊ |
codeID: D_09␊ |
description: - hybrid boot0 / boot1h for MBR dan Media partisi GPT.␊ |
codeID: D_10␊ |
description: - Pendeteksian kode FSB Secara otomatis walaupun pada PC AMD.␊ |
codeID: D_11␊ |
description: - Dukungan Apple Software RAID.␊ |
codeID: D_12␊ |
description: - Nvidia and ATI/AMD Graphics Card Enabler.␊ |
codeID: D_13␊ |
description: - Module support␊ |
codeID: D_14␊ |
description: - Memory detection adapted from memtest86: http://www.memtest.org␊ |
codeID: D_15␊ |
description: - Automatic P-State and C-State generation for native power management.␊ |
codeID: D_16␊ |
description: - Message logging.␊ |
codeID: D_17␊ |
description: The code is released under version 2 of the Gnu Public License.␊ |
codeID: D_18␊ |
description: Untuk informasi lebih lanjut, kunjungi:␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Themes␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: it.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Non installare su computer Apple Macintosh␊ |
codeID: W_Dv␊ |
description: Sviluppatori␊ |
codeID: W_Tt␊ |
description: Grazie a␊ |
codeID: W_Pk␊ |
description: Pacchetto realizzato da␊ |
codeID: W_Pb␊ |
description: Pacchetto compilato da␊ |
codeID: W_Lt␊ |
description: tradotto in Italiano da ErmaC e scrax␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: Le operazioni sono state completate ed un file chiamato @LOG_FILENAME@ é stato scritto nella root della partizione scelta. Per favore leggilo per vedere se l'installazione é avvenuta con successo e vedere le operazioni che sono state eseguite.␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon è la combinazione di diverse parti del boot loader. È basato sulle modifiche di David Elliott sull'implementazione "EFI" al progetto della Apple sul boot-132. Chameleon presenta le seguenti caratteristiche principali:␊ |
codeID: D_02␊ |
description: Nuove caratteristiche di Chameleon versione 2:␊ |
codeID: D_03␊ |
description: - Interfaccia grafica completamente personalizzabile per dare maggiori colori al Darwin Bootloader.␊ |
codeID: D_04␊ |
description: - Avviare DVD retail semplicemente caricando una immagine ramdisk senza l'utilizzo di programmi aggiuntivi.␊ |
codeID: D_05␊ |
description: - Ibernazione. Godetevi nel risvegliare il vostro Mac OS X con un'immagine di anteprima.␊ |
codeID: D_06␊ |
description: - Sovrascrittura del SMBIOS per personalizzare i valori dell'SMBIOS.␊ |
codeID: D_07␊ |
description: - Sovrascrittura della tabella DSDT, potendo selezionare una ottimizzata che risolve svariate problematiche.␊ |
codeID: D_08␊ |
description: - Iniezione delle Proprità delle Periferiche con stringhe EFI in device-properties.␊ |
codeID: D_09␊ |
description: - boot0 / boot1h ibrido per dischi partizionati in MBR e GPT.␊ |
codeID: D_10␊ |
description: - Riconoscimento automatico della frequenza anche sui recenti processori AMD.␊ |
codeID: D_11␊ |
description: - Supporta il RAID software di Apple.␊ |
codeID: D_12␊ |
description: - Abilitazione grafica per schede Nvidia and ATI/AMD.␊ |
codeID: D_13␊ |
description: - Supporto Moduli.␊ |
codeID: D_14␊ |
description: - Rivelamento memoria adattato da memtest86: http://www.memtest.org␊ |
codeID: D_15␊ |
description: - Generazione automatica dei P-State e C-State.␊ |
codeID: D_16␊ |
description: - Log dei messaggi.␊ |
codeID: D_17␊ |
description: Il codice è rilasciato sotto licenza GPL v.2 (Gnu Public License).␊ |
codeID: D_18␊ |
description: Per maggiori informazioni, visita (In Inglese):␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Temi␊ |
description: Una raccolta di temi campione. Molti altri sono reperibili su http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: Un tema The Bullet by NoSmokingBandit.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Il tema standard usato dal bootloader, aggiunto qui per essere personalizzato.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: Tema integrato in chameleon (Standard ridotto).␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Il vecchio tema Standard di chameleon.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: ja.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Do not install to an Apple Macintosh computer␊ |
codeID: W_Dv␊ |
description: Developers␊ |
codeID: W_Tt␊ |
description: Thanks to␊ |
codeID: W_Pk␊ |
description: Package␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language translated by ???␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: The scripts have completed and a file named @LOG_FILENAME@ has been written to the root of your chosen partition. Please read it to find out if the installation was successful and keep it for a record of what was done.␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon is a boot loader built using a combination of components which evolved from the development of David Elliott's fake EFI implementation added to Apple's boot-132 project.␊ |
codeID: D_02␊ |
description: Chameleon v2 is extended with many features. For example:␊ |
codeID: D_03␊ |
description: - Fully customizable GUI to bring some color to the Darwin Bootloader.␊ |
codeID: D_04␊ |
description: - Load a ramdisk to directly boot retail DVDs without additional programs.␊ |
codeID: D_05␊ |
description: - Hibernation. Enjoy resuming your Mac OS X with a preview image.␊ |
codeID: D_06␊ |
description: - SMBIOS override to modify the factory SMBIOS values.␊ |
codeID: D_07␊ |
description: - DSDT override to use a modified fixed DSDT which can solve several issues.␊ |
codeID: D_08␊ |
description: - Device Property Injection via device-properties string.␊ |
codeID: D_09␊ |
description: - hybrid boot0 / boot1h for MBR and GPT partitioned disks.␊ |
codeID: D_10␊ |
description: - Automatic FSB detection code even for recent AMD CPUs.␊ |
codeID: D_11␊ |
description: - Apple Software RAID support.␊ |
codeID: D_12␊ |
description: - Nvidia andamp; ATI/AMD Graphics Card Enabler.␊ |
codeID: D_13␊ |
description: - Module support␊ |
codeID: D_14␊ |
description: - Memory detection adapted from memtest86:␊ |
codeID: D_15␊ |
description: - Automatic P-State and C-State generation for native power management.␊ |
codeID: D_16␊ |
description: - Message logging.␊ |
codeID: D_17␊ |
description: The code is released under version 2 of the Gnu Public License.␊ |
codeID: D_18␊ |
description: FAQ's:␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Themes␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: ko.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: 애플 매킨토시 컴퓨터에 설치하지 마시오.␊ |
codeID: W_Dv␊ |
description: 개발자들␊ |
codeID: W_Tt␊ |
description: 도움 주신분들␊ |
codeID: W_Pk␊ |
description: 패키지 개발␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language 번역 by drew_afx␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: 스크립트(설치)가 완료되었습니다. 선택된 파티션의 루트 디렉토리에 @LOG_FILENAME@를 생성하였습니다. 위 로그를 꼭 읽어보시고 설치가 정상적으로 되었는지 알아보신 후에 기록으로 잘 보관하시기 바랍니다. ␊ |
file: Description␊ |
codeID: D_01␊ |
description: 카멜레온은 David Elliott의 fake EFI 구현 기술의 개발이 애플의 boot-132 프로젝트와 만나 생긴 요소들로 만들어진 부트로더입니다.␊ |
codeID: D_02␊ |
description: 카멜레온 버전 2는 더 많은 기능들이 추가되었습니다. 예를 들어:␊ |
codeID: D_03␊ |
description: - Darwin 부트로더에 완벽한 커스터마이징이 가능한 컬러 GUI.␊ |
codeID: D_04␊ |
description: - 외부 프로그램 없이 자체적으로 램디스크에 리테일 DVD를 로딩하여 부팅.␊ |
codeID: D_05␊ |
description: - 최대 절전 모드 지원. 맥 OS X이 썸네일로부터 깨어나는 모습을 즐기세요.␊ |
codeID: D_06␊ |
description: - SMBIOS 오버라이드로 공장 SMBIOS 기초 설정들을 변경.␊ |
codeID: D_07␊ |
description: - DSDT 오버라이드로 고쳐진 DSDT를 사용하므로써 많은 문제들을 해결.␊ |
codeID: D_08␊ |
description: - device-properties string으로 디바이스 속성을 주입.␊ |
codeID: D_09␊ |
description: - 하이브리드 boot0 / boot1h 로 MBR 및 GPT 로 파티션된 디스크들을 허용.␊ |
codeID: D_10␊ |
description: - 최신 AMD CPU들까지도 자동 FSB 인식 코드로 지원.␊ |
codeID: D_11␊ |
description: - 애플 소프트웨어 RAID 지원.␊ |
codeID: D_12␊ |
description: - Nvidia 및 ATI/AMD 그래픽 카드 활성화.␊ |
codeID: D_13␊ |
description: - 모듈 지원␊ |
codeID: D_14␊ |
description: - memtest86으로부터 기반된 RAM 메모리 인식 : (영문) http://www.memtest.org␊ |
codeID: D_15␊ |
description: - 자동 P-State and C-State 생성기능으로 자연적인 전원 관리.␊ |
codeID: D_16␊ |
description: - 메세지 로깅.␊ |
codeID: D_17␊ |
description: 이 코드는 GNU 일반 공중 사용 허가서(GPL) 버전 2 아래 공개 되었습니다.␊ |
codeID: D_18␊ |
description: FAQ's:␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Themes␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: mk.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Не инсталирајте на Apple Macintosh компјутер␊ |
codeID: W_Dv␊ |
description: Девелопери␊ |
codeID: W_Tt␊ |
description: Благодарност до␊ |
codeID: W_Pk␊ |
description: Пакет␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language преведени од страна на kn6600␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: Скриптата е завршена и датотека со име @LOG_FILENAME@ е запишана во root на избраната партиција. Ве молиме прочитајте ја да дознаете дали инсталацијата е успешна и да имате евиденција за што е направено.␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon е комбинација од различни boot-loader компоненти. Базиран е на лажна EFI имплементација на David Elliott додадено на проектот boot-132 на Apple.␊ |
codeID: D_02␊ |
description: Нови функции во Chameleon 2.0␊ |
codeID: D_03␊ |
description: - Потполно прилагодлив графички интерфејс кои придонесува за визуелни подобрувања на Darwin Bootloader-от.␊ |
codeID: D_04␊ |
description: - Стартувањето на оригинални DVD-а дирекнто ја вчитува ramdisk сликата без помош од дополнителни програми.␊ |
codeID: D_05␊ |
description: - Хибернација. Ужувајте во продолжувањето на работата на вашиот Mac OS X.␊ |
codeID: D_06␊ |
description: - SMBIOS замена, за модифицирање на оригиналните SMBIOS вредности.␊ |
codeID: D_07␊ |
description: - DSDT замена, за да користите модифициран DSDT, кој што решава повеќе проблеми.␊ |
codeID: D_08␊ |
description: - Имплементирање на својства на уредите со посредство на device-properties стрингови.␊ |
codeID: D_09␊ |
description: - Хибридни boot0 / boot1h за MBR и GPT партиционирани дискови.␊ |
codeID: D_10␊ |
description: - Автоматско препознавање на FSB и за новите AMD процесори.␊ |
codeID: D_11␊ |
description: - Поддршка на Apple Software RAID.␊ |
codeID: D_12␊ |
description: - Nvidia and ATI/AMD Graphics Card Enabler.␊ |
codeID: D_13␊ |
description: - Поддршка за модули.␊ |
codeID: D_14␊ |
description: - Детекција на меморијата адаптирано од memtest86: http://www.memtest.org␊ |
codeID: D_15␊ |
description: - Автоматско генерирање на P-State and C-State за природна контрола на процесорот.␊ |
codeID: D_16␊ |
description: - Логирање на пораки.␊ |
codeID: D_17␊ |
description: Овој код е објавен под верзијата 2 од Gnu Public License.␊ |
codeID: D_18␊ |
description: За повеќе информации посетете ја веб страницата :␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Themes␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: nl.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Installeer niet op een echte Apple Macintosh computer!␊ |
codeID: W_Dv␊ |
description: Ontwikkelaars␊ |
codeID: W_Tt␊ |
description: Dank gaat uit naar␊ |
codeID: W_Pk␊ |
description: Package␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language Vertaald door yeehaw123 and Badeendje␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: De installatie is klaar en het bestand @LOG_FILENAME@ is geschreven naar de root van de door u gekozen partitie. Alstublieft lees het document om te zien of de installatie goed verlopen is en bewaar het als registratie.␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon is een combinatie van verschillende boot loader componenten. Het is gebaseerd op de fake EFI implementatie van David Elliott die toegevoegd is aan Apple's boot-123 project.␊ |
codeID: D_02␊ |
description: Nieuwe functies in Chameleon 2.0.␊ |
codeID: D_03␊ |
description: - Volledig aanpasbare GUI, zodat de Darwin Bootloader een mooier uiterlijk krijgt.␊ |
codeID: D_04␊ |
description: - Het booten van retail DVD's door direct een ramdisk image te laden zonder hulp van extra programma's.␊ |
codeID: D_05␊ |
description: - Slaapstand. Geniet van het hervatten van Mac OS X met een preview image.␊ |
codeID: D_06␊ |
description: - Het negeren van het SMBIOS zodat de standaard SMBIOS waarden aangepast kunnen worden.␊ |
codeID: D_07␊ |
description: - Het negeren van de DSDT zodat er een aangepaste verbeterde DSDT kan worden gebruikt om bepaalde problemen op te lossen.␊ |
codeID: D_08␊ |
description: - Device Property Injection via device-properties string.␊ |
codeID: D_09␊ |
description: - Hybride boot0 / boot1h voor MBR en GPT gepartitioneerde schijven.␊ |
codeID: D_10␊ |
description: - automatische FSB detectie code, zelfs voor recente AMD processoren.␊ |
codeID: D_11␊ |
description: - Apple Software RAID ondersteuning.␊ |
codeID: D_12␊ |
description: - Nvidia and ATI/AMD graphische kaart autodetectie.␊ |
codeID: D_13␊ |
description: - Module ondersteuning␊ |
codeID: D_14␊ |
description: - Geheugen detectie overgenomen van memtest86: http://www.memtest.org␊ |
codeID: D_15␊ |
description: - Automatisch P-State's and C-State's aangemaakt voor automatisch stroombeheer.␊ |
codeID: D_16␊ |
description: - Bericht logboek.␊ |
codeID: D_17␊ |
description: De code is vrijgegeven onder versie 2 van de Gnu Public License.␊ |
codeID: D_18␊ |
description: Voor meer informatie, bezoek:␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Themes␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: pl.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Nie instaluj na komputerze Apple Macintosh␊ |
codeID: W_Dv␊ |
description: Developerzy␊ |
codeID: W_Tt␊ |
description: Podziękowania dla␊ |
codeID: W_Pk␊ |
description: Pakiet␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language translated by janek202␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: Zakończono wykonywanie skryptów i plik logu @LOG_FILENAME@ został zapisany na głównym katalogu wybranej partycji. Proszę przeczytaj go by dowiedzieć się, czy instalacja przebiegła pomyślnie i zachowaj go jako zapis, co zostało wykonane.␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon jest połączeniem różnych komponentów boot loadera. Jest oparty na implementacji fake EFI Davida Elliotta dodanej do projektu boot-132 Apple'a. Chameleon jest rozszerzony o następujące funkcje:␊ |
codeID: D_02␊ |
description: Nowe funkcje w Chameleonie 2.0␊ |
codeID: D_03␊ |
description: - Całkowicie konfigurowalne GUI by dodać trochę koloru do Bootloadera Darwin.␊ |
codeID: D_04␊ |
description: - Uruchamianie płyt Retail DVD przez bezpośrednie ładowanie obrazu ramdisk bez pomocy dodatkowych programów.␊ |
codeID: D_05␊ |
description: - Hibernacja. Ciesz się przywracaniem Twojego systemu Mac OS X z obrazu pamięci.␊ |
codeID: D_06␊ |
description: - Zastąpienie SMBIOS by zmodyfikować jego fabryczne wartości.␊ |
codeID: D_07␊ |
description: - Zastąpienie DSDT by móc używać zmodyfikowanego, poprawionego DSDT, który może rozwiązać parę problemów.␊ |
codeID: D_08␊ |
description: - Wstrzykiwanie ustawień urządzeń (Device Property Injection) przez łańcuch device-properties.␊ |
codeID: D_09␊ |
description: - Hybrydowe boot0 / boot1h dla dysków w układzie partycji MBR i GPT.␊ |
codeID: D_10␊ |
description: - Automatyczne wykrywanie FSB nawet dla najnowszych procesorów AMD.␊ |
codeID: D_11␊ |
description: - Obsługa Apple Software RAID.␊ |
codeID: D_12␊ |
description: - Automatyczne uruchamianie kart NVIDII oraz ATI/AMD.␊ |
codeID: D_13␊ |
description: - Wsparcie dla modułów.␊ |
codeID: D_14␊ |
description: - Wykrywanie pamięci dostosowane z memtest86: http://www.memtest.org␊ |
codeID: D_15␊ |
description: - Automatyczne generowanie stanów P-State and C-State w celu uzyskania natywnego zarządzania energią.␊ |
codeID: D_16␊ |
description: - Logownie komunikatów.␊ |
codeID: D_17␊ |
description: Kod jest publikowany z licencją Gnu Public License w wersji 2.␊ |
codeID: D_18␊ |
description: By uzyskać bardziej dokładne informacje, odwiedź:␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Themes␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: pt-BR.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Não instale num computador Apple Macintosh␊ |
codeID: W_Dv␊ |
description: Desenvolvedores␊ |
codeID: W_Tt␊ |
description: Agradecimentos␊ |
codeID: W_Pk␊ |
description: Créditos pelos pacotes␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language translated by oldnapalm␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: Os scripts estão finalizados e foi gerado um ficheiro @LOG_FILENAME@ que se encontra na raiz da partição selecionada. Por Favor leia-o para verificar se a instalação foi realizada com sucesso e guarde como relatório do que foi realizado.␊ |
file: Description␊ |
codeID: D_01␊ |
description: O Chameleon é um boot loader que combina vários componentes. Ele é baseado na implementação de fake EFI feita por David Elliott, adicionada ao projeto boot-132 da Apple. O Chameleon é extendido com as seguintes características chave:␊ |
codeID: D_02␊ |
description: Novos recursos no Chameleon 2.0␊ |
codeID: D_03␊ |
description: - Interface gráfica (GUI) totalmente personalizável para trazer algumas cores ao Bootloader Darwin.␊ |
codeID: D_04␊ |
description: - Inicializa DVDs retail lendo uma imagem ramdisk diretamente, sem ajuda de nenhum programa adicional.␊ |
codeID: D_05␊ |
description: - Hibernação. Aproveite continuar o seu Mac OS X com uma amostra de imagem da tela.␊ |
codeID: D_06␊ |
description: - Substituição de SMBIOS para modificar os valores de fábrica.␊ |
codeID: D_07␊ |
description: - Substituição de DSDT para usar uma tabela modificada que pode resolver diversos problemas.␊ |
codeID: D_08␊ |
description: - Injeção de propriedades de dispositivo através do string device-properties.␊ |
codeID: D_09␊ |
description: - boot0 / boot1h híbridos para discos particionados em MBR e GPT.␊ |
codeID: D_10␊ |
description: - Detecção automática de FSB mesmo para processadores AMD recentes.␊ |
codeID: D_11␊ |
description: - Suporte a Software RAID da Apple.␊ |
codeID: D_12␊ |
description: - Ativação Placas Gráficas Nvidia and ATI/AMD.␊ |
codeID: D_13␊ |
description: - Suporte de Modulos␊ |
codeID: D_14␊ |
description: - Deteção Memoria adaptada de memtest86: http://www.memtest.org␊ |
codeID: D_15␊ |
description: - P-State automático and Geração C-State para gestão de energia nativa.␊ |
codeID: D_16␊ |
description: - Protocolo Mensagens.␊ |
codeID: D_17␊ |
description: Este código é distribuido sobre os termos da versão 2 da Gnu Public License.␊ |
codeID: D_18␊ |
description: Para informações detalhadas visite:␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Temas␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: pt-PT.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Não instale num computador Apple Macintosh␊ |
codeID: W_Dv␊ |
description: Desenvolvedores␊ |
codeID: W_Tt␊ |
description: Agradecimentos␊ |
codeID: W_Pk␊ |
description: Créditos pelos pacotes␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language translated by artur-pt␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: Os scripts estão finalizados e foi gerado um ficheiro @LOG_FILENAME@ que se encontra na raiz da partição selecionada. Por Favor leia-o para verificar se a instalação foi realizada com sucesso e guarde como relatório do que foi realizado.␊ |
file: Description␊ |
codeID: D_01␊ |
description: O Chameleon é um boot loader que combina vários componentes. Ele é baseado na implementação de fake EFI feita por David Elliott, adicionada ao projeto boot-132 da Apple. O Chameleon é extendido com as seguintes características chave:␊ |
codeID: D_02␊ |
description: Novos recursos no Chameleon 2.0␊ |
codeID: D_03␊ |
description: - Interface gráfica (GUI) totalmente personalizável para trazer algumas cores ao Bootloader Darwin.␊ |
codeID: D_04␊ |
description: - Inicializa DVDs retail lendo uma imagem ramdisk directamente, sem ajuda de nenhum programa adicional.␊ |
codeID: D_05␊ |
description: - Hibernação. Desfrute de continuar o seu Mac OS X com uma amostra de imagem da tela.␊ |
codeID: D_06␊ |
description: - Substituição de SMBIOS para modificar os valores de fábrica.␊ |
codeID: D_07␊ |
description: - Substituicção de DSDT para usar uma tabela modificada que pode resolver diversos problemas.␊ |
codeID: D_08␊ |
description: - Injecção de propriedades de dispositivo através do string device-properties.␊ |
codeID: D_09␊ |
description: - boot0 / boot1h híbridos para discos particionados em MBR e GPT.␊ |
codeID: D_10␊ |
description: - Detecção automática de FSB mesmo para processadores AMD recentes.␊ |
codeID: D_11␊ |
description: - Suporte a Software RAID da Apple.␊ |
codeID: D_12␊ |
description: - Ativação Placas Gráficas Nvidia and ATI/AMD.␊ |
codeID: D_13␊ |
description: - Suporte de Modulos␊ |
codeID: D_14␊ |
description: - Deteção Memoria adaptada de memtest86: http://www.memtest.org␊ |
codeID: D_15␊ |
description: - P-State automático and Geração C-State para gestão de energia nativa.␊ |
codeID: D_16␊ |
description: - Protocolo Mensagens.␊ |
codeID: D_17␊ |
description: Este código é distribuido sobre os termos da versão 2 da Gnu Public License.␊ |
codeID: D_18␊ |
description: Para informações detalhadas visite:␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Themes␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: ru.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Do not install to an Apple Macintosh computer␊ |
codeID: W_Dv␊ |
description: Developers␊ |
codeID: W_Tt␊ |
description: Thanks to␊ |
codeID: W_Pk␊ |
description: Package␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language translated by ???␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: The scripts have completed and a file named @LOG_FILENAME@ has been written to the root of your chosen partition. Please read it to find out if the installation was successful and keep it for a record of what was done.␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon представляет собой комбинацию различных компонентов и основывается на эмуляции EFI реализованной Дэвидом Элиотом (David Elliott) интегрированной в оригинальный проект boot-132 от Apple. Chameleon включает в себя следующие улучшения:␊ |
codeID: D_02␊ |
description: Новые возможности Chameleon 2.0␊ |
codeID: D_03␊ |
description: - Полностью изменяемый интерфейс пользователя для улучшения внешнего вида загрузчика Darwin.␊ |
codeID: D_04␊ |
description: - Загрузка оригинального установочного диска Mac OS X без помощи посторонних программ.␊ |
codeID: D_05␊ |
description: - Поддержка гибернации.␊ |
codeID: D_06␊ |
description: - Переопределение фабричных параметров SMBIOS.␊ |
codeID: D_07␊ |
description: - Возможность использования модифицированного DSDT для решения некоторых специфических проблем.␊ |
codeID: D_08␊ |
description: - Инжекция Device Property Strings.␊ |
codeID: D_09␊ |
description: - Гибридный boot0 / boot1h для разметок MBR и GPT.␊ |
codeID: D_10␊ |
description: - Автоматическое определение FSB даже для процессоров AMD.␊ |
codeID: D_11␊ |
description: - Поддержка программных RAID массивов Apple.␊ |
codeID: D_12␊ |
description: - Nvidia and ATI/AMD Graphics Card Enabler.␊ |
codeID: D_13␊ |
description: - Module support␊ |
codeID: D_14␊ |
description: - Memory detection adapted from memtest86: http://www.memtest.org␊ |
codeID: D_15␊ |
description: - Automatic P-State and C-State generation for native power management.␊ |
codeID: D_16␊ |
description: - Message logging.␊ |
codeID: D_17␊ |
description: The code is released under version 2 of the Gnu Public License.␊ |
codeID: D_18␊ |
description: Более подробная информация по загрузчику:␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Themes␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: sr.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: Instalacija nije prilagođena za Apple Macintosh računare␊ |
codeID: W_Dv␊ |
description: Programeri␊ |
codeID: W_Tt␊ |
description: Hvala␊ |
codeID: W_Pk␊ |
description: Paket␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language translated by mistudio␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: Skripte su završene i mapa pod nazivom @LOG_FILENAME@ je snimljena u koren particije diska koje ste odabrali. Molimo pročitajte kako biste saznali da li je instalacija bila uspešna i čuvajte log radi evidencije o tome šta je učinjeno␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon je kombinacija različitih komponenti bootloadera. On je zasnovan na David Elliottovoj lažnoj EFI implementaciji dodanoj u Apple boot-132 projekat.␊ |
codeID: D_02␊ |
description: Nove funkcije u Chameleon 2.0␊ |
codeID: D_03␊ |
description: - Potpuno prilagođen grafički korisinički interfejs donosi vizuelna poboljšanja u Darwin Bootloaderu.␊ |
codeID: D_04␊ |
description: - Start sa retail DVD-om direktno učitava ramdisk slike bez pomoći dodatnih programa.␊ |
codeID: D_05␊ |
description: - Hibernacija. Uživajte u nastavaku rada vašeg Mac OS X-a sa pregledom slike.␊ |
codeID: D_06␊ |
description: - SMBIOS zamena tvorničkih za modifikovanu SMBIOS vrednost.␊ |
codeID: D_07␊ |
description: - DSDT zamena za korišćenje modifikovanog, ispravljenog DSDT-a koji može rešiti nekoliko problema.␊ |
codeID: D_08␊ |
description: - Implementacija svojstva uređaja putem svojstva niza.␊ |
codeID: D_09␊ |
description: - hibridni boot0 / boot1h za MBR i GPT particijske diskove.␊ |
codeID: D_10␊ |
description: - automatsko FSB kodno otkrivanje čak i za poslednje AMD procesore. ␊ |
codeID: D_11␊ |
description: - Apple softver RAID podrška.␊ |
codeID: D_12␊ |
description: - Nvidia and ATI/AMD Grafički Aktivator.␊ |
codeID: D_13␊ |
description: - Modul podrška␊ |
codeID: D_14␊ |
description: - Detekcija memorije prilagođena iz memtest86: http://www.memtest.org␊ |
codeID: D_15␊ |
description: - Automatsko generisanje P-State i C-State za izvorno upravljanje energijom.␊ |
codeID: D_16␊ |
description: - Prijava porukama.␊ |
codeID: D_17␊ |
description: Kod je objavljen pod verzijom 2 GNU javna licenca.␊ |
codeID: D_18␊ |
description: Za detaljne informacije posetite:␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Themes␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: zh_CN.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: 请勿安装到 Apple 的 Macintosh 电脑␊ |
codeID: W_Dv␊ |
description: 开发者␊ |
codeID: W_Tt␊ |
description: 感谢␊ |
codeID: W_Pk␊ |
description: 封装者␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language 翻译 crazybirdy, Ulimate␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: 安装程序已经完成 并在选择安装的分区建立 @LOG_FILENAME@ 纪录文件。 请 详阅纪录文件 确认安装是否成功,并保留安装纪录文件备查。␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon 是一个结合许多组件的开机引导器。这些组件的演变来自于 David Elliott 加入 Apple 的 boot-132 程序项目的 fake EFI 安装工具。␊ |
codeID: D_02␊ |
description: Chameleon v2 现在已经扩充了许多功能。例如:␊ |
codeID: D_03␊ |
description: - 客制化的图形用户介面,为 Darwin Bootloader 带来更多的色彩。␊ |
codeID: D_04␊ |
description: - 无须其他程序,即可载入 ramdisk 来直接启动 零售版 DVD。␊ |
codeID: D_05␊ |
description: - 支持睡眠。 可使用睡眠映像恢复继续使用 Mac OS X 。␊ |
codeID: D_06␊ |
description: - 可使用修改过的 SMBIOS 覆盖 SMBIOS 之出厂设定值。␊ |
codeID: D_07␊ |
description: - 可使用修正过的 DSDT 覆盖原始 DSDT,并可解决许多问题。␊ |
codeID: D_08␊ |
description: - 可透过 device-properties string 自动注入设备属性。␊ |
codeID: D_09␊ |
description: - 支持 MBR 及 GPT 分区磁盘的 boot0 / boot1h 多重开机功能。␊ |
codeID: D_10␊ |
description: - 具有自动侦测 FSB 码功能,并可用于新式的 AMD CPU。␊ |
codeID: D_11␊ |
description: - 支持 Apple Software RAID 功能。␊ |
codeID: D_12␊ |
description: - 支持 Nvidia and ATI/AMD 显示卡启用功能。␊ |
codeID: D_13␊ |
description: - 支持模组功能。␊ |
codeID: D_14␊ |
description: - 支持改编自 memtest86: http://www.memtest.org 的内存侦测功能。␊ |
codeID: D_15␊ |
description: - 具有自动生成 P-State 及 C-State 的原生电源管理之功能。␊ |
codeID: D_16␊ |
description: - 具有信息纪录之功能。␊ |
codeID: D_17␊ |
description: 源代码依照 Gnu Public License v2 的原则释放于以下网站上。␊ |
codeID: D_18␊ |
description: 常见问题:␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Themes␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |
language: zh_TW.lproj␊ |
file: Welcome␊ |
codeID: W_Im␊ |
description: 請勿安裝到 Apple 的 Macintosh 電腦␊ |
codeID: W_Dv␊ |
description: 開發者␊ |
codeID: W_Tt␊ |
description: 感謝␊ |
codeID: W_Pk␊ |
description: 封裝者␊ |
codeID: W_Pb␊ |
description: Package Built by␊ |
codeID: W_Lt␊ |
description: language 翻譯 crazybirdy, Ulimate␊ |
file: Conclusion␊ |
codeID: C_Ms␊ |
description: 安裝程序已經完成 並在選擇安裝的分割區建立 @LOG_FILENAME@ 紀錄文件。 請 詳閱紀錄文件 確認安裝是否成功,並保留安裝紀錄文件備查。␊ |
file: Description␊ |
codeID: D_01␊ |
description: Chameleon 是一個結合許多組件的開機引導器。這些組件的演變來自於 David Elliott 加入 Apple 的 boot-132 程式項目的 fake EFI 安裝工具。␊ |
codeID: D_02␊ |
description: Chameleon v2 現在已經擴充了許多功能。例如:␊ |
codeID: D_03␊ |
description: - 客製化的圖形使用者介面,為 Darwin Bootloader 帶來更多的色彩。␊ |
codeID: D_04␊ |
description: - 無須其他程式,即可載入 ramdisk 來直接啓動 零售版 DVD。␊ |
codeID: D_05␊ |
description: - 支持睡眠。 可使用睡眠映像恢復繼續使用 Mac OS X 。␊ |
codeID: D_06␊ |
description: - 可使用修改過的 SMBIOS 覆蓋 SMBIOS 之出廠設定值。␊ |
codeID: D_07␊ |
description: - 可使用修正過的 DSDT 覆蓋原始 DSDT,並可解決許多問題。␊ |
codeID: D_08␊ |
description: - 可透過 device-properties string 自動注入設備屬性。␊ |
codeID: D_09␊ |
description: - 支持 MBR 及 GPT 分割區磁盤的 boot0 / boot1h 多重開機功能。␊ |
codeID: D_10␊ |
description: - 具有自動偵測 FSB 碼功能,並可用於新式的 AMD CPU。␊ |
codeID: D_11␊ |
description: - 支持 Apple Software RAID 功能。␊ |
codeID: D_12␊ |
description: - 支持 Nvidia and ATI/AMD 顯示卡啓用功能。␊ |
codeID: D_13␊ |
description: - 支持模組功能。␊ |
codeID: D_14␊ |
description: - 支持改編自 memtest86: http://www.memtest.org 的記憶體偵測功能。␊ |
codeID: D_15␊ |
description: - 具有自動生成 P-State 及 C-State 的原生電源管理之功能。␊ |
codeID: D_16␊ |
description: - 具有訊息紀錄之功能。␊ |
codeID: D_17␊ |
description: 源代碼依照 Gnu Public License v2 的原則釋放於以下網站上。␊ |
codeID: D_18␊ |
description: 常見問題:␊ |
file: LocalizableStrings␊ |
messageName: ERROR_BOOTVOL␊ |
description: This software must be installed on the startup volume.␊ |
messageName: ERROR_INSTALL␊ |
description: This volume does not meet the requirements for this update.␊ |
messageName: Newer_Package_Installed_message␊ |
description: A newer version of Chameleon is already installed.␊ |
messageName: Intel_Mac_message␊ |
description: This software cannot be installed on this computer.␊ |
objectName: Chameleon_title␊ |
objectTitle: Chameleon Bootloader␊ |
description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc.␊ |
objectName: Standard_title␊ |
objectTitle: Standard␊ |
description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one.␊ |
objectName: noboot_title␊ |
objectTitle: Don't install the Bootloader␊ |
description: Useful if you only want to install the extra's.␊ |
objectName: Module_title␊ |
objectTitle: Modules␊ |
description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file.␊ |
objectName: AutoReso_title␊ |
objectTitle: Resolution␊ |
description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.␊ |
objectName: klibc_title␊ |
objectTitle: klibc␊ |
description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/␊ |
objectName: uClibc_title␊ |
objectTitle: uClibc++␊ |
description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc␊ |
objectName: Keymaps_title␊ |
objectTitle: Keylayout␊ |
description: Select one keylayout to use. This will also install the Keylayout module and keymaps.␊ |
objectName: mac-de_title␊ |
objectTitle: German Mac Keyboard␊ |
description: Use the keyboard layout for a German Mac keyboard␊ |
objectName: mac-es_title␊ |
objectTitle: Spanish Mac Keyboard␊ |
description: Use the keyboard layout for a Spanish Mac keyboard␊ |
objectName: mac-fr_title␊ |
objectTitle: French Mac Keyboard␊ |
description: Use the keyboard layout for a French Mac keyboard␊ |
objectName: mac-it_title␊ |
objectTitle: Italian Mac Keyboard␊ |
description: Use the keyboard layout for an Italian Mac keyboard␊ |
objectName: mac-se_title␊ |
objectTitle: Swedish Mac Keyboard␊ |
description: Use the keyboard layout for a Swedish Mac keyboard␊ |
objectName: pc-fr_title␊ |
objectTitle: French PC Keyboard␊ |
description: Use the keyboard layout for a French PC keyboard␊ |
objectName: Themes_title␊ |
objectTitle: Themes␊ |
description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html␊ |
objectName: Bullet_title␊ |
objectTitle: Bullet␊ |
description: A lovely simple theme by NoSmokingBandit from April 2009.␊ |
objectName: Default_title␊ |
objectTitle: Standard␊ |
description: Chameleon default theme introduced for v2.0 RC5.␊ |
objectName: Embed_title␊ |
objectTitle: Embed␊ |
description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme.␊ |
objectName: Legacy_title␊ |
objectTitle: Legacy␊ |
description: Chameleon's original default theme introduced for v2.0 RC1.␊ |
objectName: Options_title␊ |
objectTitle: Settings␊ |
description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags.␊ |
objectName: Control_title␊ |
objectTitle: Control Options␊ |
description: Settings to control how Chameleon works.␊ |
objectName: BootBanner_title␊ |
objectTitle: BootBanner=No␊ |
description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc.␊ |
objectName: GUI_title␊ |
objectTitle: GUI=No␊ |
description: Disables the default enabled graphic user interface.␊ |
objectName: LegacyLogo_title␊ |
objectTitle: LegacyLogo=Yes␊ |
description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme.␊ |
objectName: InstantMenu_title␊ |
objectTitle: InstantMenu=Yes␊ |
description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen.␊ |
objectName: QuietBoot_title␊ |
objectTitle: QuietBoot=Yes␊ |
description: Enable quiet boot mode (no messages or prompt).␊ |
objectName: ShowInfo_title␊ |
objectTitle: ShowInfo=Yes␊ |
description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes.␊ |
objectName: Wait_title␊ |
objectTitle: Wait=Yes␊ |
description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting.␊ |
objectName: General_title␊ |
objectTitle: General Options␊ |
description: Choose from a selection of base options.␊ |
objectName: arch_title␊ |
objectTitle: arch=i386␊ |
description: Boots the kernel in 32bit mode rather than the default 64bit mode.␊ |
objectName: EHCIacquire_title␊ |
objectTitle: EHCIacquire=Yes␊ |
description: Enables the option to fix any EHCI ownership issues due to bad bioses.␊ |
objectName: EthernetBuiltIn_title␊ |
objectTitle: EthernetBuiltIn=Yes␊ |
description: Enables the option of adding 'built-in' to your ethernet devices.␊ |
objectName: ForceHPET_title␊ |
objectTitle: ForceHPET=Yes␊ |
description: Enables HPET on intel chipsets, for bioses that dont include the option.␊ |
objectName: ForceWake_title␊ |
objectTitle: ForceWake=Yes␊ |
description: his option enables you to bypass bad sleep images.␊ |
objectName: RestartFix_title␊ |
objectTitle: RestartFix=No␊ |
description: Disables the automatically enabled restart fix.␊ |
objectName: UHCIreset_title␊ |
objectTitle: UHCIreset=Yes␊ |
description: Enables the option to reset UHCI controllers before starting OS X.␊ |
objectName: UseMemDetect_title␊ |
objectTitle: UseMemDetect=No␊ |
description: Disables the automatically enabled RAM recognition.␊ |
objectName: UseKernelCache_title␊ |
objectTitle: UseKernelCache=Yes␊ |
description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need.␊ |
objectName: Wake_title␊ |
objectTitle: Wake=Yes␊ |
description: Attempts to load the sleep image saved from last hibernation.␊ |
objectName: KernelFlags_title␊ |
objectTitle: Kernel Flags␊ |
description: Choose from a selection of kernel flags.␊ |
objectName: Verbose_title␊ |
objectTitle: Verbose Mode␊ |
description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting.␊ |
objectName: Singleusermode_title␊ |
objectTitle: Single User Mode␊ |
description: A troubleshooting option used for booting into OS X's BSD/Unix command line.␊ |
objectName: Ignorecaches_title␊ |
objectTitle: Ignore Caches␊ |
description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches.␊ |
objectName: Npci_title␊ |
objectTitle: npci=0x2000␊ |
description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code.␊ |
objectName: Darkwake_title␊ |
objectTitle: darkwake=0␊ |
description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep.␊ |
objectName: PowerManagement_title␊ |
objectTitle: Power Management␊ |
description: A selection of options that deal with power management and speedstep.␊ |
objectName: CSTUsingSystemIO_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: New C-State _CST generation method using SystemIO registers instead of FixedHW.␊ |
objectName: DropSSDT_title␊ |
objectTitle: DropSSDT=Yes␊ |
description: Discard the motherboard's built-in SSDT tables.␊ |
objectName: EnableC2State_title␊ |
objectTitle: EnableC2State=Yes␊ |
description: Enable specific Processor power state, C2.␊ |
objectName: EnableC3State_title␊ |
objectTitle: EnableC3State=Yes␊ |
description: Enable specific Processor power state, C3.␊ |
objectName: EnableC4State_title␊ |
objectTitle: EnableC4State=Yes␊ |
description: Enable specific Processor power state, C4.␊ |
objectName: GenerateCStates_title␊ |
objectTitle: Generate C-States=Yes␊ |
description: Enable auto generation of processor idle sleep states (C-States).␊ |
objectName: GeneratePStates_title␊ |
objectTitle: Generate P-States=Yes␊ |
description: Enable auto generation of processor power performance states (P-States).␊ |
objectName: Resolution_title␊ |
objectTitle: Resolution␊ |
description: Set one resolution to use.␊ |
objectName: 1024x600x32_title␊ |
objectTitle: 1024x600x32␊ |
description: Set Graphics Mode to 1024x600x32␊ |
objectName: 1024x768x32_title␊ |
objectTitle: 1024x768x32␊ |
description: Set Graphics Mode to 1024x768x32␊ |
objectName: 1280x768x32_title␊ |
objectTitle: 1280x768x32␊ |
description: Set Graphics Mode to 1280x768x32␊ |
objectName: 1280x800x32_title␊ |
objectTitle: 1280x800x32␊ |
description: Set Graphics Mode to 1280x800x32␊ |
objectName: 1280x1024x32_title␊ |
objectTitle: 1280x1024x32␊ |
description: Set Graphics Mode to 1280x1024x32␊ |
objectName: 1280x960x32_title␊ |
objectTitle: 1280x960x32␊ |
description: Set Graphics Mode to 1280x960x32␊ |
objectName: 1440x900x32_title␊ |
objectTitle: 1440x900x32␊ |
description: Set Graphics Mode to 1440x900x32␊ |
objectName: 1600x900x32_title␊ |
objectTitle: 1600x900x32␊ |
description: Set Graphics Mode to 1600x900x32␊ |
objectName: 1680x1050x32_title␊ |
objectTitle: 1680x1050x32␊ |
description: Set Graphics Mode to 1680x1050x32␊ |
objectName: 1920x1080x32_title␊ |
objectTitle: 1920x1080x32␊ |
description: Set Graphics Mode to 1920x1080x32␊ |
objectName: 1920x1200x32_title␊ |
objectTitle: 1920x1200x32␊ |
description: Set Graphics Mode to 1920x1200x32␊ |
objectName: Video_title␊ |
objectTitle: Video␊ |
description: A selection of options that deal with video.␊ |
objectName: GraphicsEnabler_title␊ |
objectTitle: GraphicsEnabler=Yes␊ |
description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info.␊ |
objectName: UseAtiROM_title␊ |
objectTitle: UseAtiROM=Yes␊ |
description: Enables UseAtiROM options.␊ |
objectName: UseNvidiaROM_title␊ |
objectTitle: UseNvidiaROM=Yes␊ |
description: Enables UseNvidiaROM options.␊ |
objectName: VBIOS_title␊ |
objectTitle: VBIOS=Yes␊ |
description: Enables VBIOS option␊ |