language: ar.lproj file: Welcome codeID: W_Im description: لا تثبته على اجهزة الأبل الاصلية . codeID: W_Dv description: المطورين codeID: W_Tt description: شكرا ل codeID: W_Pk description: الحزمة codeID: W_Pb description: Package Built by codeID: W_Lt description: language translated by Mohamed Khairy file: Conclusion codeID: C_Ms description: المخطوطات تمت , و ملف قد @LOG_FILENAME@ يسمى كٌتب لجذر البارتشن المختار من فضلك أقرأه لكى تعرف اذا كان التثبيت تم بنجاح واحتفظ به كتسجيل لما تم . file: Description codeID: D_01 description: ‎‎الشامليون عباره عن مزيج من مختلف مكونات محمل الاقلاع٫
بنى عل ىالتطبيق Fake EFI لصاحبه David Elliott واضيف الى مشروع Apple's boot-132 ٫
‎تم تطوير الشامليون ليضم المميزات التالية codeID: D_02 description: ‎المميزات الجديده فى الشامليون ٢٫٠ codeID: D_03 description: - واجهه قابله للتخصيص الكامل لاضافه بعض الالوان لمحمل الاقلاع Darwin codeID: D_04 description: - اقلاع الاقراص الاصلية عن طريق تحميل صوره ل ramdisk مباشرة دون الحاجه لبرامج اضافية codeID: D_05 description: - السبات Hibernation ٫ استمتع باستئناف الماكنتوش من الحالة السابقه ٫ codeID: D_06 description: - ‎امكانيه تعديل القيم المصنعيه ل SMBIOS باستخادم SMBIOS.plist ٫ codeID: D_07 description: - ‎امكانيه استخدام DSDT.aml ‎المصححة التى تسطيع حل الكثير من العيوب codeID: D_08 description: - ‎امكانيه حقن بعض المكونات لكى تعمل عن الطريق device-properties string ٫ codeID: D_09 description: - ‎تحتوى على هجين من boot0 / boot1h ‎من اجل الاقراص المقسمة بنظامى MBR . GPT ٫ codeID: D_10 description: - ‎تحديد كود الناقل الامامى اوتوماتيكيا حتى مع اخر المعالجات لشركه AMD codeID: D_11 description: - ‎دعم ل Apple Software RAID codeID: D_12 description: - دعم تشغيل كروت الشاشة من nvidia , Ati/AMD codeID: D_13 description: - دعم Module codeID: D_14 description: - الكشف عن الذاكرة مقتبس من codeID: D_15 description: - Automatic P-State andamp; C-State generation لادارة الطاقة كما يجب ان يكون codeID: D_16 description: - Message logging. codeID: D_17 description: هذا البرنامج صدر تحت رخضة الاصدار الثانى الهام ل Gnu . codeID: D_18 description: ‎ لمزيد من المعلومات قم بزيارة موقعنا file: LocalizableStrings messageName: ERROR_BOOTVOL description: دة التخزين بدء التشغيل messageName: ERROR_INSTALL description: تشن لايفى بمتطلبات هذا التحديث ٫ messageName: Newer_Package_Installed_message description: لبرنام messageName: Intel_Mac_message description: البرنامج على هذا الكمبيوتر objectName: Chameleon_title objectTitle: Chameleon Bootloader description: البوت لودر يحتاج اللى ثلاث ملفات (باختصار ) boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: تريد فقط تتبيت الاكسترا objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: تصلة بالجهاز هذه الاضافة غير مدمجه فى trunk الى الان و لها استخدام بسيط بالاضفة فانها تقوم بالتعديل على vesa mode لكروت الشاشة انتل لتحصل على رزليوشن شاشتك اثناء الاقلاع objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Themes description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5 objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1 objectName: Options_title objectTitle: Settings description: بواسطة اختيار اى من هذه الخيارات /Extra/org.chameleon.Boot.plist انشى objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: العاء اى كتبات تظهر فى واجهه البوت مثل رقم نسخة البوت objectName: GUI_title objectTitle: GUI=No description: الغاء الواجهه الرسومية للبوت objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: استخدام لوجو شركة ابل الاصلى اثناء بدء التشغيل بدلا من المعدل الذى ياتى مع الثيم objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: يوقف التوبيت بعد ما ان يقوم الشاميلون بعملياته مفيد لو واجهك مشاكل من البوت لودر ٫ objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: This option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option. language: bg.lproj file: Welcome codeID: W_Im description: Do not install to an Apple Macintosh computer codeID: W_Dv description: Разработенот codeID: W_Tt description: Благодарности на codeID: W_Pk description: Package codeID: W_Pb description: Package Built by codeID: W_Lt description: language translated by ??? file: Conclusion codeID: C_Ms description: The scripts have completed and a file named @LOG_FILENAME@ has been written to the root of your chosen partition. Please read it to find out if the installation was successful and keep it for a record of what was done. file: Description codeID: D_01 description: Chameleon е комбинация от разбични boot loader компоненти. Базиран е на fake EFI изпълнението на Дейвид Ейлиът добавено към проекта boot-132 на Apple. Chameleon е разширен със следните ключови функции: codeID: D_02 description: Нови функции в Chameleon 2.0 codeID: D_03 description: - Напълно управляем графичен интерфейс за добавяне на живи цветове към Darwin Bootloader. codeID: D_04 description: - Boot-ва retail DVD-та чрез директно зареждане на ramdisk image без помоща на допълнителни програми. codeID: D_05 description: - Хибернация. codeID: D_06 description: - SMBIOS заместване, за да бъдат модифицирани оригиналните SMBIOS стойности. codeID: D_07 description: - DSDT заместване, за да бъде използвано модифицирано DSDT, което решава множество проблеми. codeID: D_08 description: - Вграждане на особеностите на различни хардуерни устройства посредством device-properties стрингове. codeID: D_09 description: - Хибридни boot0 / boot1h за MBR и GPT разделени дискове.. codeID: D_10 description: - Автоматично разпознаване на FSB за новите AMD процесори. codeID: D_11 description: - Поддръжка на Apple Software RAID.. codeID: D_12 description: - Nvidia and ATI/AMD Graphics Card Enabler. codeID: D_13 description: - Module support codeID: D_14 description: - Memory detection adapted from memtest86: codeID: D_15 description: - Automatic P-State and C-State generation for native power management. codeID: D_16 description: - Message logging. codeID: D_17 description: The code is released under version 2 of the Gnu Public License. codeID: D_18 description: За повече информация посетете file: LocalizableStrings messageName: ERROR_BOOTVOL description: Този софтуер трябва да бъде инсталиран на стартовия дял. messageName: ERROR_INSTALL description: Този дял не отговаря на изискванията за това обновяване. messageName: Newer_Package_Installed_message description: По нова версия на Chameleon вече е инсталирана. messageName: Intel_Mac_message description: Софтуерът не може да бъде инсталиран на този компютър. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Стандартно инсталиране на Chameleon objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Теми description: Колекция от теми http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: The Bullet тема от NoSmokingBandit objectName: Default_title objectTitle: Стандартна description: Вградената тема в Chameleon. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Опции description: Опции по подразбиране objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Премахва графичния интерфейс като добавя GUI=n в com.apple.Boot.plist objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Добавя EHCIacquire=y в com.apple.Boot.plist. Опцията поправя всякакви EHCI (USB 1.0) проблеми поради некоректно написани BIOS-и. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Добавя EthernetBuiltIn=y в com.apple.Boot.plist. Тази опция ще направи 'вградени' вашите Ethernet устройства. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Добавя ForceHPET=y в com.apple.Boot.plist. Пуска в действие HPET при Intel чипсети за BIOS-и, които не разполагат с HPET. objectName: ForceWake_title objectTitle: ForceWake=Yes description: Добавя ForceWake=y в com.apple.Boot.plist. Опцията позволява да прескочите (да не зареждате) повредени 'изображения' на операционната система. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Добавя UHCIreset=y в com.apple.Boot.plist. Инициализира UHCI (USB 2.0) контролерите преди стартиране на OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Добавя GraphicsEnabler=y в org.chameleon.Boot.plist. Автоматично разпознаване на видео карти с nVidia чипсет и добавяне на съответната за тях информация. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: bs.lproj file: Welcome codeID: W_Im description: Instalacija nije prilagođena za Apple Macintosh kompjutere codeID: W_Dv description: Programeri codeID: W_Tt description: Hvala codeID: W_Pk description: Paket codeID: W_Pb description: Package Built by codeID: W_Lt description: language translated by mistudio file: Conclusion codeID: C_Ms description: Skripte su završile i datoteka pod nazivom @LOG_FILENAME@ je snimljena na root particije diska koje ste odabrali. Molimo pročitajte ga kako biste saznali da li je instalacija bila uspiješna i čuvajte ga radi evidencije o tome šta je učinjeno file: Description codeID: D_01 description: Chameleon je kombinacija razliƒçitih komponenata bootloadera. On se zasniva na David Elliottovoj la≈ænoj EFI implementaciji dodanoj u Apple boot-132 projekt. codeID: D_02 description: Nove funkcije u Chameleon 2.0 codeID: D_03 description: - Potpuno prilagođen grafički korisinički interfejs donosi vizuelna poboljšanja u Darwin Bootloaderu. codeID: D_04 description: - Start sa retail DVD-om direktno učitava ramdisk slike bez pomoći dodatnih programa. codeID: D_05 description: - Hibernacija. Uživajte u nastavaku rada vašeg Mac OS X-a sa pregledom slike. codeID: D_06 description: - SMBIOS zamijena tvorničkih za modificiranu SMBIOS vrijednost. codeID: D_07 description: - DSDT zamijena za korištenje modificiranog, ispravljenog DSDT-a koji može riješiti nekoliko problema. codeID: D_08 description: - Implementacija svojstva uređaja putem svojstva niza. codeID: D_09 description: - hibridni boot0 / boot1h za MBR i GPT particijske diskove. codeID: D_10 description: - automatsko FSB kodno otkrivanje čak i za posljednje AMD procesore. codeID: D_11 description: - Apple softver RAID podrška. codeID: D_12 description: - Nvidia and ATI/AMD Grafički Aktivator. codeID: D_13 description: - Modul podrška codeID: D_14 description: - Detekcija memorije prilagoƒëena iz memtest86: codeID: D_15 description: - Automatsko generisanje P-State i C-State za izvorno upravljanje energijom. codeID: D_16 description: - Prijava porukama. codeID: D_17 description: Kod je objavljen pod verzijom 2 GNU javna licenca. codeID: D_18 description: Za detaljne informacije posjetite: file: LocalizableStrings messageName: ERROR_BOOTVOL description: Ovaj softver mora biti instaliran na volumen sa kojeg se pokreće. messageName: ERROR_INSTALL description: Ovaj volumen ne ispunjava uslove za ovu nadogradnju. messageName: Newer_Package_Installed_message description: Nova verzija Chameleona već je instalirana messageName: Intel_Mac_message description: Ovaj softver ne može biti instaliran na ovom računaru objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon zahtjeva tri bitna fajla. (pojednostavljeno rečeno) boot0 (MBR na disk pogonu) odgovoran za učitavanje boot1. boot1 (Na particiju za boot-sektor) za pronalaženje boot2. boot2 (Na particiju za root direktorij) za učitavanje Kernela itd. objectName: Standard_title objectTitle: Standard description: instalira Chameleon fajlove u početnu datoteku diska (root) odabrane particije koristeći bilo boot0 ili boot0md u zavisnosti od vašeg sistema ne uništavajući bilo kakvu Winodws instalaciju ukoliko je imate instaliranu. objectName: noboot_title objectTitle: Ne instaliraj Bootloader description: Korisno ukoliko želite instalirati samo extra. objectName: Module_title objectTitle: Chameleon Moduli description: Moduli ugrađeni u sistem Cameleona omogućavaju korisniku ili programeru proširenje funkcionalnosti Cameleon jezgre bez zamijene glavnog boot fajla. objectName: AutoReso_title objectTitle: Rezolucija description: Ovaj modul čita edid informacije sa monitora priključenog na glavni ekran. Modul trenutno nije integrisan u trunk i nije od velike primjene kao što stoji. Osim toga, modul će zakrpati VESA modove koji su prisutni u pred Intelovim HD grafičkim karticama kako bi osigurale odgovarajuću rezoluciju ekrana prilikom podizanja. objectName: klibc_title objectTitle: klibc description: Ovaj modul omogućava standard c biblioteku za module za povezivanje ako chameleon biblioteka nije dovoljna. Ovo se trenutno koristi samo sa uClibc++ bibliotekom. Izvor: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: Ovaj modul omogućava minimalističku c++ runtime biblioteku za korištenje u drugim modulima. To ne pruža funkcionalnost sama po sebi, umjesto toga, služi kako bi se omogućilo korištenje c++ jezika u ostalim modulima. Imajte na umu da su obe RTTI iznimke onemogućene. Izvor: http://cxx.uclibc.org/ Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Korištenje tastature za Njemačku Mac tastaturu objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Korištenje tastature za Španjolsku Mac tastaturu objectName: mac-fr_title objectTitle: French Mac Keyboard description: Korištenje tastature za Francusku Mac tastaturu objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Korištenje tastature za Italijansku Mac tastaturu objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Korištenje tastature za Svedsku Mac tastaturu objectName: pc-fr_title objectTitle: French PC Keyboard description: Korištenje tastature za Francusku PC tastaturu objectName: Themes_title objectTitle: Themes description: Skup predloženih tema Više tema možete pronaći na http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: Predivna jednostavna tema od NoSmokingBandit iz Aprila 2009. objectName: Default_title objectTitle: Standard description: Chameleonova trenutno zadana tema. objectName: Embed_title objectTitle: Embed description: Manja, jednostavnija verzija nove zadane teme koja se koristi prilikom izgradnje Chameleon-a koji zahtjeva ugrađenu temu. objectName: Legacy_title objectTitle: Legacy description: Chameleonova prethodno zadana tema. objectName: Options_title objectTitle: Boot Opcije description: Kreira /Extra/org.chameleon.Boot.plist i omogučava izbor željene opcije za kontrolu Chameleon postavki. objectName: Control_title objectTitle: Control Options description: Opcije za kontrolu rada Chameleona. objectName: BootBanner_title objectTitle: BootBanner=No description: Skriva Cameleon boot banner u grafičkom korisničkom inferfejsu (GUI). objectName: GUI_title objectTitle: GUI=No description: Onemogućava uključeni zadani korisnički grafički interfejs. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Koristite legacy (sivi i bijeli) apple logo prilikom podizanja radije nego boot.png sliku iz teme objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: Prikaz zaslona za odabir particije bez prikazivanja timeout ekrana. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Omogućava mod mirnog pokretanja (bez poruka ili redaka). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Onemogućava prikaz detalja o particiji i rezoluciji. objectName: Wait_title objectTitle: Wait=Yes description: Pauzira boot proces nakon što je Cameleon završio postavljanje, onda čeka na pritisak tipke prije nego se pokrene mach kernel. Korisno u kombinaciji sa verbose podizanjem za riješavanje problema. objectName: General_title objectTitle: General Options description: Izaberite od selekcije iz baze opcija. objectName: arch_title objectTitle: arch=i386 description: Pokreće jezgru (kernel) u 32bitnom modu radije nego u zadanom 64bitnom modu. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Omogućava opciju za popravak bilo kojih EHCI vlasničkih prava zbog lošeg biosa. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Omogućava mogućnost dodavanja "ugrađeno" na vaše Ethernet uređaje. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Omogućava HPET na Intel čipsetima, za biose koje ne uključuju ovu opciju. objectName: ForceWake_title objectTitle: ForceWake=Yes description: Ova opcija omogućava vam da zaobiđete loše uspavane slike (sleep images). objectName: RestartFix_title objectTitle: RestartFix=No description: Isključuje automatsko omogućavanje restart fix opcije objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Omogućava opciju za reset UHCI kontrolera prije početka podizanja. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Isključuje omogućeno automatsko RAM prepoznavanje. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: Samo za Lion. Omogućava učitavanje prethodno povezanog kernela. Ovo će ignorisati /E/E i /S/L/E. Ovo koristiti samo ako morate znati da sadrži sve što vam je potrebno. objectName: Wake_title objectTitle: Wake=Yes description: Pokušava da učita uspavanu sliku snimljenu iz prethodne hibernacije objectName: KernelFlags_title objectTitle: Kernel Flags description: Izaberite od selekcije iz kernel zastava. objectName: Verbose_title objectTitle: Verbose Mode description: Uključuje verbose prijavu i omogućava vam da vidite poruke iz oba Chameleon i kernel OS X prilikom pokretanja. Osnova za rješavanje problema. objectName: Singleusermode_title objectTitle: Single User Mode description: Opcija za rješavanje problema koja se koristi za dizanje OS X BSD / Unix komandnog reda. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Opcija koja nije potrebna za svakodnevno podizanje, ali može biti korisna ako želite da OS X učita sve fajlove iz sistemskog direktorija, radije nego se oslanjajući na pre-izgrađenu predmemoriju. objectName: Npci_title objectTitle: npci=0x2000 description: Postavlja zastave npci = 0x2000 za Kernel Zastave objectName: Darkwake_title objectTitle: darkwake=0 description: Samo Lion. Isključuje 'low power wake' opciju koja ponekad ostavi crni ekran posije buđenja iz spavanja. objectName: PowerManagement_title objectTitle: Power Management description: Odabir opcija koje se bave upravljanjem potrošnjom energije i SpeedStepom. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: Nova C-state _CST generacija metodom SystemIO registracije umjesto FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Odbacuje SSDT tablice ugrađene na matičnoj ploči. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Uključuje posebno Processorsko stanje napajanja, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Uključuje posebno Processorsko stanje napajanja, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Uključuje posebno Processorsko stanje napajanja, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Uključuje automatsko generisanje procesora u stanju mirovanja (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Omogućava automatsko generisanje snage procesora stanja performansi (P-States). objectName: Resolution_title objectTitle: Resolution description: Postavlja rezoluciju ekrana za vaš monitor objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Postavite Grafički Mod na 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Postavite Grafički Mod na 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Postavite Grafički Mod na 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Postavite Grafički Mod na 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Postavite Grafički Mod na 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Postavite Grafički Mod na 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Postavite Grafički Mod na 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Postavite Grafički Mod na 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Postavite Grafički Mod na 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Postavite Grafički Mod na 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Postavite Grafički Mod na 1920x1200x32 objectName: Video_title objectTitle: Video description: Odabir opcija koje se bave s videom. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Omogućava opciju auto prepoznavanja NVIDIA baziranih grafičkih video kartica i upisuje pravilne informacije o istoj. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Uključuje UseAtiROM opciju. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Uključuje UseNvidiaROM opciju. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Uključuje VBIOS opciju language: de.lproj file: Welcome codeID: W_Im description: Achtung ! Nicht auf einem Apple Macintosh Computer Installieren codeID: W_Dv description: Entwickler codeID: W_Tt description: Dank codeID: W_Pk description: Package codeID: W_Pb description: Package Built by codeID: W_Lt description: language translated by iXabbu, olegischinski and NextMac file: Conclusion codeID: C_Ms description: Die Scripts wurden ausgeführt und eine Datei genannt @LOG_FILENAME@ wurde ins Rootverzeichnis deiner ausgesuchten Partition geschrieben. Bitte lese die Datei um herauszufinden ob die Installation erfolgreich war. Behalte die Datei um nachzuschauen was getan wurde. file: Description codeID: D_01 description: Chameleon ist eine Kombination verschiedener Bootloader Komponenten. Als Basis diente David Elliott's fake EFI Implementierung die zu Apple's boot-132 Projekt hinzugefügt wurde. Chameleon wurde mit folgenden Hauptmerkmalen erweitert: codeID: D_02 description: Neue Funktionen in Chameleon 2.0 : codeID: D_03 description: - Vollständig anpassbare GUI um etwas Farbe in den Darwin Bootloader zu bringen. codeID: D_04 description: - Starten von retail DVDs durch direktes Laden eines RAM-Disk Images, ohne zusätzliche Programme zu benötigen . codeID: D_05 description: - Ruhezustand. Genießt Mac OS X mit einem Vorschau-Bild aufzuwecken. codeID: D_06 description: - SMBIOS Override um vorgegebene SMBIOS Werte anzupassen. codeID: D_07 description: - DSDT Override um eine angepasste DSDT, die verschiedene Probleme beheben kann, zu laden. codeID: D_08 description: - Device Property Injection über device-properties string. codeID: D_09 description: - hybrider boot0 / boot1h für MBR und GPT partitionierte Festplatten. codeID: D_10 description: - Code zur automatischen FSB Erkennung, selbst für AMD CPUs. codeID: D_11 description: - Apple Software RAID Unterstützung. codeID: D_12 description: - Nvidia and ATI/AMD Graphics Card Enabler. codeID: D_13 description: - Module support codeID: D_14 description: - Speicher Erkennung angepasst von memtest86: http://www.memtest.org codeID: D_15 description: - Automatische P-State and C-State generation für native power management. codeID: D_16 description: - Message logging. codeID: D_17 description: The code is released under version 2 of the Gnu Public License. codeID: D_18 description: Für weitere Informationen besuche file: LocalizableStrings messageName: ERROR_BOOTVOL description: Diese Software muss auf dem Startlaufwerk installiert werden. messageName: ERROR_INSTALL description: Dieses Laufwerk ist nicht für dieses Update geeignet. messageName: Newer_Package_Installed_message description: Es ist bereits eine neuere Version dieses Pakets installiert. messageName: Intel_Mac_message description: Diese Software kann auf diesem Computer nicht installiert werden. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon benötigt drei wesentliche Dateien. (einfach gesprochen) boot0 (im MBR der Festplatte) verantwortlich für das Laden von boot1. boot1 (im Bootsektor der Zielpartition) findet boot2. boot2 (root-Verzeichnis der Partition) lädt den Kernel etc. objectName: Standard_title objectTitle: Standard description: Installiert die drei wesentlichen Dateien und schreibt dabei boot0 in die ersten 440 Byte des MBR, so dass kein existierender Windows-Code überschrieben wird. boot0 sucht dann nach boot1h auf der ersten aktiven Partition. * Diese Option setzt die Zielpartition auf aktiv. objectName: noboot_title objectTitle: Keines description: Chameleon nicht installieren (hilfreich wenn nur Extra-Komponenten installiert werden sollen) objectName: Module_title objectTitle: Chameleon Module description: Das in Chameleon integrierte Modulsystem ermöglicht es dem Benutzer/Entwickler, die Hauptfunktionen von Chameleon zu erweitern ohne die eigentliche boot Datei zu verändern. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: Dieses Modul stellt eine Standard C-Bibliothek für Module bereit, falls die von Chameleon bereitgestellte Bibliothek nicht ausreicht. Im Moment wird dies nur von der uClibc++ Bibliothek genutzt. Quelldatei: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: Dieses Modul stellt eine vereinfachte c++ Bibliothek für Module bereit. Eine Funktionalität ist nicht von alleine gegeben, es ermöglicht lediglich, c++ Programmiersprache in anderen Modulen zu verwenden. Bitte daran denken das sowohl 'rtti' als auch 'Ausnahmen' deaktiviert wurden. Quelldatei: http://cxx.uclibc.org/ . Abhängigkeiten: klibc objectName: Keymaps_title objectTitle: Tastaturbelegung description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Tastaturbelegung: Deutsch Mac objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Tastaturbelegung: Spanisch Mac objectName: mac-fr_title objectTitle: French Mac Keyboard description: Tastaturbelegung: Französisch Mac objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Tastaturbelegung: Italienisch Mac objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Tastaturbelegung: Schwedisch Mac objectName: pc-fr_title objectTitle: French PC Keyboard description: Tastaturbelegung: Französisch PC objectName: Themes_title objectTitle: Erscheinungsbild description: Eine Sammlung verschiedener Themen. Weitere Themen gibt es hier: http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: Das Bullet-Thema von NoSmokingBandit objectName: Default_title objectTitle: Standard description: Das neue Standard-Thema objectName: Embed_title objectTitle: Embed description: Vereinfachte Version des neuen Standard-Themas, nutzbar wenn für Chameleon ein eingebettetes Thema benötigt wird. objectName: Legacy_title objectTitle: Legacy description: Das bisherige Standard-Thema objectName: Options_title objectTitle: Optionen description: Erstellt eine org.chameleon.Boot.plist in /Extra und setzt die nachfolgend gewählten Schlüssel zur Steuerung von Chameleon. objectName: Control_title objectTitle: Kontrolloptionen description: Einstellungen zur Kontrolle von Chameleon. objectName: BootBanner_title objectTitle: BootBanner=Nein description: Kein Chameleon-Banner im Startbild. objectName: GUI_title objectTitle: GUI=Nein description: Deaktiviert die graphische Oberfläche beim Booten. objectName: LegacyLogo_title objectTitle: LegacyLogo=Ja description: Nutzt das Apple Startbild beim Booten (nicht das boot.png des Themas). objectName: InstantMenu_title objectTitle: InstantMenu=Ja description: Zeigt die Partitionsauswahl ohne Wartezeit. objectName: QuietBoot_title objectTitle: QuietBoot=Ja description: Bootet ohne Verlaufsmeldungen. objectName: ShowInfo_title objectTitle: ShowInfo=Ja description: Aktiviert die Anzeige der Partition und Details der Bildschirmauflösung. objectName: Wait_title objectTitle: Warten=Ja description: Stoppt den Bootprozess nach der Chameleon-Routine und lädt den mach_kernel erst nach Drücken einer beliebigen Taste. Hilfreich bei der Fehlersuche in Kombination mit dem Booten im Text-Modus. objectName: General_title objectTitle: Basisoptionen description: Auswahl an Basisoptionen. objectName: arch_title objectTitle: arch=i386 description: Bootet den Kernel im 32bit Modus (Standard ist 64bit). objectName: EHCIacquire_title objectTitle: EHCIacquire=Ja description: Versucht Zugriffsprobleme des EHCI-Controllers bei fehlerhaftem BIOS zu lösen. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Ja description: Lässt die Netzwerkkarte als 'built-in' erscheinen. objectName: ForceHPET_title objectTitle: ForceHPET=Ja description: Versucht HPET bei Intel-Chipsätzen zu aktivieren, falls das BIOS diese Einstellung nicht bietet. objectName: ForceWake_title objectTitle: ForceWake=Ja description: Versucht das Aufwachen bei fehlerhaftem Image des letzten Ruhezustandes zu erzwingen. objectName: RestartFix_title objectTitle: RestartFix=Nein description: Übergeht die Anwendung des Restart-Fix. objectName: UHCIreset_title objectTitle: UHCIreset=Ja description: Führt ein 'Reset' des UHCI-Controllers vor dem Start von OS X aus. objectName: UseMemDetect_title objectTitle: Benutze MemDetect=Nein description: Übergeht die automatische Erkennung des Arbeitsspeichers. objectName: UseKernelCache_title objectTitle: UseKernelCache=Ja description: Nur für Lion. Aktiviert das Laden des pre-linked kernel. Treiber in /E/E und /S/L/E werden ignoriert. Nur benutzen, wenn damit alles Notwendige geladen werden kann. objectName: Wake_title objectTitle: Aufwachen=Ja description: Versucht das Image des letzten Ruhezustands (Hibernation) zu laden. objectName: KernelFlags_title objectTitle: Kernel Flags description: Auswahl an kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Meldungen von Chameleon und OS X Kernel werden während des Bootens angezeigt. Wichtig zur Fehlerdiagnose. objectName: Singleusermode_title objectTitle: Single User Mode description: Zur Fehlerbehebung in die BSD/Unix Kommandozeile von OS X booten. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Nicht für den täglichen Gebrauch, aber hilfreich, um OS X alle Systemdateien unter Umgehung der Caches laden zu lassen. objectName: Npci_title objectTitle: npci=0x2000 description: Behebt manchmal den Fehler 'PCI Configuration Failed' objectName: Darkwake_title objectTitle: darkwake=0 description: Nur für Lion. Verhindert das 'low power wake', wodurch manchmal der Monitor nach dem Aufwachen aus dem Ruhezustand schwarz bleibt. objectName: PowerManagement_title objectTitle: Energieverwaltung description: Optionen zur Energieverwaltung und CPU-Taktung. objectName: DropSSDT_title objectTitle: DropSSDT=Ja description: Überspringt das Einlesen der SSDT-Tabellen des BIOS. objectName: EnableC2State_title objectTitle: EnableC2State=Ja description: C2 ermöglichen. objectName: EnableC3State_title objectTitle: EnableC3State=Ja description: C3 ermöglichen. objectName: EnableC4State_title objectTitle: EnableC4State=Ja description: C4 ermöglichen. objectName: GenerateCStates_title objectTitle: Generate C-States=Ja description: Generiert automatisch die C-States des Prozessors. objectName: GeneratePStates_title objectTitle: Generate P-States=Ja description: Generiert automatisch die P-States des Prozessors. objectName: CSTUsingSystemIO_title objectTitle: Die neue - Generate C-States=Ja description: Die neue C-State _CST Erzeugungsmethode erfordert das Benutzen von SystemIO Registern an Stelle von FixedHW. objectName: Resolution_title objectTitle: Bildschirmauflösung description: Setzt die Bildschirmauflösung für den Bootprozess. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Setzt die Bildschirmauflösung auf 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Setzt die Bildschirmauflösung auf 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Setzt die Bildschirmauflösung auf 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Setzt die Bildschirmauflösung auf 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Setzt die Bildschirmauflösung auf 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Setzt die Bildschirmauflösung auf 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Setzt die Bildschirmauflösung auf 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Setzt die Bildschirmauflösung auf 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Setzt die Bildschirmauflösung auf 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Setzt die Bildschirmauflösung auf 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Setzt die Bildschirmauflösung auf 1920x1200x32 objectName: Video_title objectTitle: Video description: Optionen zur Grafik. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Ja description: Nutzt die automatische Erkennung von NVIDIA-Grafikchipsätzen. Zusätzliche Injektoren sind obsolet. objectName: UseAtiROM_title objectTitle: Benutze AtiROM=Ja description: Nutzt ein AtiROM. objectName: UseNvidiaROM_title objectTitle: Benutze NvidiaROM=Ja description: Nutzt ein NvidiaROM. objectName: VBIOS_title objectTitle: VBIOS=Ja description: Nutzt VBIOS. language: el.lproj file: Welcome codeID: W_Im description: Do not install to an Apple Macintosh computer codeID: W_Dv description: Developers codeID: W_Tt description: Thanks to codeID: W_Pk description: Package codeID: W_Pb description: Package Built by codeID: W_Lt description: language translated by ??? file: Conclusion codeID: C_Ms description: The scripts have completed and a file named @LOG_FILENAME@ has been written to the root of your chosen partition. Please read it to find out if the installation was successful and keep it for a record of what was done. file: Description codeID: D_01 description: Chameleon is a boot loader built using a combination of components which evolved from the development of David Elliott's fake EFI implementation added to Apple's boot-132 project. codeID: D_02 description: Chameleon v2 is extended with many features. For example: codeID: D_03 description: - Fully customizable GUI to bring some color to the Darwin Bootloader. codeID: D_04 description: - Load a ramdisk to directly boot retail DVDs without additional programs. codeID: D_05 description: - Hibernation. Enjoy resuming your Mac OS X with a preview image. codeID: D_06 description: - SMBIOS override to modify the factory SMBIOS values. codeID: D_07 description: - DSDT override to use a modified fixed DSDT which can solve several issues. codeID: D_08 description: - Device Property Injection via device-properties string. codeID: D_09 description: - hybrid boot0 / boot1h for MBR and GPT partitioned disks. codeID: D_10 description: - Automatic FSB detection code even for recent AMD CPUs. codeID: D_11 description: - Apple Software RAID support. codeID: D_12 description: - Nvidia andamp; ATI/AMD Graphics Card Enabler. codeID: D_13 description: - Module support codeID: D_14 description: - Memory detection adapted from memtest86: codeID: D_15 description: - Automatic P-State and C-State generation for native power management. codeID: D_16 description: - Message logging. codeID: D_17 description: The code is released under version 2 of the Gnu Public License. codeID: D_18 description: FAQ's: file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: ŒòŒ≠ŒºŒ±œÑŒ± description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: en.lproj file: Welcome codeID: W_Im description: Do not install to an Apple Macintosh computer codeID: W_Dv description: Developers codeID: W_Tt description: Thanks to codeID: W_Pk description: Package codeID: W_Pb description: Package Built by codeID: W_Lt description: language translated by blackosx file: Conclusion codeID: C_Ms description: The scripts have completed and a file named @LOG_FILENAME@ has been written to the root of your chosen partition. Please read it to find out if the installation was successful and keep it for a record of what was done. file: Description codeID: D_01 description: Chameleon is a boot loader built using a combination of components which evolved from the development of David Elliott's fake EFI implementation added to Apple's boot-132 project. codeID: D_02 description: Chameleon v2 is extended with many features. For example: codeID: D_03 description: - Fully customizable GUI to bring some color to the Darwin Bootloader. codeID: D_04 description: - Load a ramdisk to directly boot retail DVDs without additional programs. codeID: D_05 description: - Hibernation. Enjoy resuming your Mac OS X with a preview image. codeID: D_06 description: - SMBIOS override to modify the factory SMBIOS values. codeID: D_07 description: - DSDT override to use a modified fixed DSDT which can solve several issues. codeID: D_08 description: - Device Property Injection via device-properties string. codeID: D_09 description: - hybrid boot0 / boot1h for MBR and GPT partitioned disks. codeID: D_10 description: - Automatic FSB detection code even for recent AMD CPUs. codeID: D_11 description: - Apple Software RAID support. codeID: D_12 description: - Nvidia andamp; ATI/AMD Graphics Card Enabler. codeID: D_13 description: - Module support codeID: D_14 description: - Memory detection adapted from memtest86: codeID: D_15 description: - Automatic P-State and C-State generation for native power management. codeID: D_16 description: - Message logging. codeID: D_17 description: The code is released under version 2 of the Gnu Public License. codeID: D_18 description: FAQ's: file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Themes description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: es.lproj file: Welcome codeID: W_Im description: No lo instale en un ordenador Apple Macintosh codeID: W_Dv description: Programadores codeID: W_Tt description: Gracias a codeID: W_Pk description: Paquete codeID: W_Pb description: Package Built by codeID: W_Lt description: language traducido por juanerson file: Conclusion codeID: C_Ms description: Los scripts se han completado y un archivo de nombre @LOG_FILENAME@ ha sido escrito en la raíz de la partición seleccionada. Por favor léalo para saber si la instalación fue exitosa y mantener un registro de lo que se hizo. file: Description codeID: D_01 description: El Bootloader Chameleon es la combinación de varios componentes. Esta basado en la implementación EFI falsa de David Elliott, incorporada al método Boot-132, a partir del proyecto de código abierto Darwin de Apple codeID: D_02 description: Entre las Novedades en Chameleon v2 se encuentran muchas funciones extendidas, por ejemplo: codeID: D_03 description: - Interfaz GUI totalmente personalizada para brindarle más colorido al Dawin Bootloader. codeID: D_04 description: - Booteo de DVDs con simplemente cargar una imagen ramdisk sin la ayuda de programas adicionales. codeID: D_05 description: - Hibernación. Disfrute reanudar su MAC OS X con una imagen de muestra. codeID: D_06 description: - Anulación de SMBIOS, para modificar los valores de fábrica SMBIOS. codeID: D_07 description: - Anulación de DSDT, para usar un DSDT modificado y arreglado capaz de resolver varios inconvenientes. codeID: D_08 description: - Inyección de Propiedades de Dispositivos a través de EFI strings. codeID: D_09 description: - Permite el arranque de esquemas híbridos boot0 / boot1h, para discos particionados en MBR y GPT. codeID: D_10 description: - Detección automática de frecuencia FSB para CPUs AMD recientes. codeID: D_11 description: - Soporte para Software RAID de Apple. codeID: D_12 description: - Habilitación de soporte para Gráficas Nvidia and ATI/AMD. codeID: D_13 description: - Soporte de carga por Módulos. codeID: D_14 description: - Detección de Memoria adaptada desde memtest86: http://www.memtest.org codeID: D_15 description: - Generación automática de P-States and C-States para gestión de energía nativa. codeID: D_16 description: - Registro de Mensajes. codeID: D_17 description: El código está liberado bajo la versión 2 de la Licencia Pública GNU. codeID: D_18 description: Para información más detallada, preguntas y respuestas visitar: file: LocalizableStrings messageName: ERROR_BOOTVOL description: Este software debe ser instalado en el volumen de inicio. messageName: ERROR_INSTALL description: Este volumen no cumple con los requisitos necesarios para esta actualizaci√≥n messageName: Newer_Package_Installed_message description: Una versi√≥n m√°s reciente de Chameleon ya ha sido instalada. messageName: Intel_Mac_message description: Este software no puede ser instalado en este ordenador. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Temas description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: fr.lproj file: Welcome codeID: W_Im description: Ne pas installer sur un ordinateur Apple Macintosh codeID: W_Dv description: Développeurs codeID: W_Tt description: Merci à codeID: W_Pk description: Package d'installation codeID: W_Pb description: Package Built by codeID: W_Lt description: language traduit par Tenval file: Conclusion codeID: C_Ms description: Les scripts sont terminés et un fichier nommé @LOG_FILENAME@ a été écrit à la racine de la partition choisie. SVP lisez le pour savoir si l'installation est un succes et garder un rapport de ce qui a été fait.. file: Description codeID: D_01 description: Chameleon est un chargeur d'amorçage construit en utilisant une combinaison de composants qui a elle même évoluée à partir du développement de l'implémentation "fake EFI" de David Elliott, qui a été ajoutée au projet boot-132 d'Apple. codeID: D_02 description: Chameleon v2 a été, au fur et à mesure, mis à jour avec nombre de fonctions : codeID: D_03 description: - Interface utilisateur customisable, pour donner un peu de piment au chargeur d'amorçage Darwin. codeID: D_04 description: - Chargement possible d'un "RAMDisk" pour pouvoir démarrer un DVD officiel de Mac OS X sans logiciels tiers. codeID: D_05 description: - Mise en veille prolongée. Permet de reprendre votre session de travail instantanément via une image d'hibernation. codeID: D_06 description: - Prise en charge d'un SMBIOS modifié. Permet d'outrepasser le SMBIOS d'origine de votre machine. codeID: D_07 description: - Prise en charge d'un DSDT modifié. Permet d'appliquer un DSDT patché et résoudre beaucoup de problèmes. codeID: D_08 description: - Injection des propriétés de périphériques via une chaîne de caractère "device-properties". codeID: D_09 description: - Fichiers boot0 et boot1h hybrides. Permet l'utilisation de disques partitionés en MBR ou GPT. codeID: D_10 description: - Detection automatique du FSB, même pour les processeurs AMD récents. codeID: D_11 description: - Support du RAID Logiciel d'Apple. codeID: D_12 description: - Activateur graphique Nvidia and ATI/AMD intégré. codeID: D_13 description: - Support de modules (extensions de Chameleon). codeID: D_14 description: - Détection mémoire adaptée de memtest86 : http://www.memtest.org codeID: D_15 description: - Génération automatique des P-State and C-State pour codeID: D_16 description: - Journalisation des messages console. codeID: D_17 description: Le code est publié sous la version 2 de la licence GPL (Gnu Public License). codeID: D_18 description: Questions fréquentes (en anglais): file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Th√®mes description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: he.lproj file: Welcome codeID: W_Im description: Do not install to an Apple Macintosh computer codeID: W_Dv description: Developers codeID: W_Tt description: Thanks to codeID: W_Pk description: Package codeID: W_Pb description: Package Built by codeID: W_Lt description: language translated by ??? file: Conclusion codeID: C_Ms description: The scripts have completed and a file named @LOG_FILENAME@ has been written to the root of your chosen partition. Please read it to find out if the installation was successful and keep it for a record of what was done. file: Description codeID: D_01 description: חמליאון זה שילוב של רכיבי בוטלודרים שונים. הוא מבוסס על יישום fake EFI של David Elliott לפרויקט boot-132 של אפל. חמליאון מגיע עם תכונות עיקריות הבאות: codeID: D_02 description: תכונות חדשות בחמליאון גרסה 2.0 codeID: D_03 description: - ממשק משתמש בעל התאמה אישית מלאה שמביאה צבעים לDarwin Bootloader. codeID: D_04 description: - התחול דיסק התקנת OSX ריטייל על ידי העלאת ramdisk בלי להיעזר בתכנות נוספות. codeID: D_05 description: - היברנציה. ליהנות מחזרת המערכת שלך ממצב היברנציה בעזרת preview image. codeID: D_06 description: - עקיפת SMBIOS לשינוי ערכי מפעל של נתוני SMBIOS. codeID: D_07 description: - עקיפת DSDT לשימוש בDSDT בהתאמה אישית אשר יכול לפתור מספר בעיות. codeID: D_08 description: - אינג'קשן של Device Property באמצעות device-properties string. codeID: D_09 description: - היבריד של boot0/boot1h לכוננים המחולקים בשיטות MBR ו GPT. codeID: D_10 description: - קוד זיהוי אוטומטי של FSB אפילו למעבדי AMD החדשים. codeID: D_11 description: - תמיכה בApple Software RAID. codeID: D_12 description: - Nvidia and ATI/AMD Graphics Card Enabler. codeID: D_13 description: - Module support codeID: D_14 description: - Memory detection adapted from memtest86: http://www.memtest.org codeID: D_15 description: - Automatic P-State and C-State generation for native power management. codeID: D_16 description: - Message logging. codeID: D_17 description: The code is released under version 2 of the Gnu Public License. codeID: D_18 description: לקבלת מידע נוסף, אנא בקרו ב: file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Themes description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: hr.lproj file: Welcome codeID: W_Im description: Instalacija nije prilagođena za Apple Macintosh računala codeID: W_Dv description: Programeri codeID: W_Tt description: Hvala codeID: W_Pk description: Paket codeID: W_Pb description: Package Built by codeID: W_Lt description: language translated by mistudio file: Conclusion codeID: C_Ms description: Skripte su završene i mapa pod nazivom @LOG_FILENAME@ je snimljena u korijen particije diska koje ste odabrali. Molimo pročitajte kako biste saznali da li je instalacija bila uspiješna i čuvajte log radi evidencije o tome šta je učinjeno. file: Description codeID: D_01 description: Chameleon je kombinacija različitih komponenti bootloadera. On je zasnovan na David Elliottovoj lažnoj EFI implementaciji dodanoj u Apple boot-132 projekt. codeID: D_02 description: Nove funkcije u Chameleon 2.0 codeID: D_03 description: - Potpuno prilagođen grafičko korisiničko sučelje donosi vizuelna poboljšanja u Darwin Bootloaderu. codeID: D_04 description: - Start sa retail DVD-om direktno učitava ramdisk slike bez pomoći dodatnih programa. codeID: D_05 description: - Hibernacija. Uživajte u nastavaku rada vašeg Mac OS X-a sa pregledom slike. codeID: D_06 description: - SMBIOS zamijena tvorničkih za modifikovanu SMBIOS vrijednost. codeID: D_07 description: - DSDT zamijena za korištenje modifikovanog, ispravljenog DSDT-a koji može riješiti nekoliko problema. codeID: D_08 description: - Implementacija svojstva uređaja putem svojstva niza. codeID: D_09 description: - hibridni boot0 / boot1h za MBR i GPT particijske diskove. codeID: D_10 description: - automatsko FSB kodno otkrivanje čak i za posljednje AMD procesore. codeID: D_11 description: - Apple softver RAID podrška. codeID: D_12 description: - Nvidia and ATI/AMD Grafički Aktivator. codeID: D_13 description: - Modul podrška codeID: D_14 description: - Detekcija memorije prilagođena iz memtest86: http://www.memtest.org codeID: D_15 description: - Automatsko generiranje P-State i C-State za izvorno upravljanje energijom. codeID: D_16 description: - Prijava porukama. codeID: D_17 description: Kod je objavljen pod verzijom 2 GNU javna licenca. codeID: D_18 description: Za detaljne informacije posjetite: file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Themes description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: id.lproj file: Welcome codeID: W_Im description: Jangan dinstall Apple Macintosh ASLI codeID: W_Dv description: Tim pengembang codeID: W_Tt description: Berterima kasih kepada codeID: W_Pk description: Pakete codeID: W_Pb description: Package Built by codeID: W_Lt description: language translated by Rudolf Tingginehe and Babiloe file: Conclusion codeID: C_Ms description: Skrip ini telah selesai dan telah disematkan pada berkas @LOG_FILENAME@ yang ditaruh di direktori utama dari partisi yang terinstall. Silahkan baca berkas itu dan perhatikan apakah instalasi telah sukses, dan simpan berkas tersebut jika selesai. file: Description codeID: D_01 description: Chameleon adalah kombinasi dari berbagai macam komponen boot loader. Berbasiskan implementasi EFI palsu oleh David Elliott yang ditambahkan pada proyek Apple’s Boot-132 codeID: D_02 description: Fitur terbaru di Chameleon 2.0 codeID: D_03 description: - GUI yang dapat diubah-suaikan dengan bebas untuk mewarnai Bootloader Darwin. codeID: D_04 description: - Jalankan DVD retail secara langsung dengan memuat sebuah image ramdisk tanpa bantuan program lain. codeID: D_05 description: - Hibernasi. Nikmati melanjutkan pekerjaan pada Mac OS X anda dengan “pratinjau image”. codeID: D_06 description: - SMBIOS override unutk memodifikasi SMBIOS bawaan. codeID: D_07 description: - DSDT override unutk menggunakan modifikasi tertentu dari DSDT yang dapat menyelesaikan isu-isu tertentu. codeID: D_08 description: - Device Property Injection melalui string device-properties. codeID: D_09 description: - hybrid boot0 / boot1h for MBR dan Media partisi GPT. codeID: D_10 description: - Pendeteksian kode FSB Secara otomatis walaupun pada PC AMD. codeID: D_11 description: - Dukungan Apple Software RAID. codeID: D_12 description: - Nvidia and ATI/AMD Graphics Card Enabler. codeID: D_13 description: - Module support codeID: D_14 description: - Memory detection adapted from memtest86: http://www.memtest.org codeID: D_15 description: - Automatic P-State and C-State generation for native power management. codeID: D_16 description: - Message logging. codeID: D_17 description: The code is released under version 2 of the Gnu Public License. codeID: D_18 description: Untuk informasi lebih lanjut, kunjungi: file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Themes description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: it.lproj file: Welcome codeID: W_Im description: Non installare su computer Apple Macintosh codeID: W_Dv description: Sviluppatori codeID: W_Tt description: Grazie a codeID: W_Pk description: Pacchetto realizzato da codeID: W_Pb description: Pacchetto compilato da codeID: W_Lt description: tradotto in Italiano da ErmaC e scrax file: Conclusion codeID: C_Ms description: Le operazioni sono state completate ed un file chiamato @LOG_FILENAME@ é stato scritto nella root della partizione scelta. Per favore leggilo per vedere se l'installazione é avvenuta con successo e vedere le operazioni che sono state eseguite. file: Description codeID: D_01 description: Chameleon è la combinazione di diverse parti del boot loader. È basato sulle modifiche di David Elliott sull'implementazione "EFI" al progetto della Apple sul boot-132. Chameleon presenta le seguenti caratteristiche principali: codeID: D_02 description: Nuove caratteristiche di Chameleon versione 2: codeID: D_03 description: - Interfaccia grafica completamente personalizzabile per dare maggiori colori al Darwin Bootloader. codeID: D_04 description: - Avviare DVD retail semplicemente caricando una immagine ramdisk senza l'utilizzo di programmi aggiuntivi. codeID: D_05 description: - Ibernazione. Godetevi nel risvegliare il vostro Mac OS X con un'immagine di anteprima. codeID: D_06 description: - Sovrascrittura del SMBIOS per personalizzare i valori dell'SMBIOS. codeID: D_07 description: - Sovrascrittura della tabella DSDT, potendo selezionare una ottimizzata che risolve svariate problematiche. codeID: D_08 description: - Iniezione delle Proprità delle Periferiche con stringhe EFI in device-properties. codeID: D_09 description: - boot0 / boot1h ibrido per dischi partizionati in MBR e GPT. codeID: D_10 description: - Riconoscimento automatico della frequenza anche sui recenti processori AMD. codeID: D_11 description: - Supporta il RAID software di Apple. codeID: D_12 description: - Abilitazione grafica per schede Nvidia and ATI/AMD. codeID: D_13 description: - Supporto Moduli. codeID: D_14 description: - Rivelamento memoria adattato da memtest86: http://www.memtest.org codeID: D_15 description: - Generazione automatica dei P-State e C-State. codeID: D_16 description: - Log dei messaggi. codeID: D_17 description: Il codice è rilasciato sotto licenza GPL v.2 (Gnu Public License). codeID: D_18 description: Per maggiori informazioni, visita (In Inglese): file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Temi description: Una raccolta di temi campione. Molti altri sono reperibili su http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: Un tema The Bullet by NoSmokingBandit. objectName: Default_title objectTitle: Standard description: Il tema standard usato dal bootloader, aggiunto qui per essere personalizzato. objectName: Embed_title objectTitle: Embed description: Tema integrato in chameleon (Standard ridotto). objectName: Legacy_title objectTitle: Legacy description: Il vecchio tema Standard di chameleon. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: ja.lproj file: Welcome codeID: W_Im description: Do not install to an Apple Macintosh computer codeID: W_Dv description: Developers codeID: W_Tt description: Thanks to codeID: W_Pk description: Package codeID: W_Pb description: Package Built by codeID: W_Lt description: language translated by ??? file: Conclusion codeID: C_Ms description: The scripts have completed and a file named @LOG_FILENAME@ has been written to the root of your chosen partition. Please read it to find out if the installation was successful and keep it for a record of what was done. file: Description codeID: D_01 description: Chameleon is a boot loader built using a combination of components which evolved from the development of David Elliott's fake EFI implementation added to Apple's boot-132 project. codeID: D_02 description: Chameleon v2 is extended with many features. For example: codeID: D_03 description: - Fully customizable GUI to bring some color to the Darwin Bootloader. codeID: D_04 description: - Load a ramdisk to directly boot retail DVDs without additional programs. codeID: D_05 description: - Hibernation. Enjoy resuming your Mac OS X with a preview image. codeID: D_06 description: - SMBIOS override to modify the factory SMBIOS values. codeID: D_07 description: - DSDT override to use a modified fixed DSDT which can solve several issues. codeID: D_08 description: - Device Property Injection via device-properties string. codeID: D_09 description: - hybrid boot0 / boot1h for MBR and GPT partitioned disks. codeID: D_10 description: - Automatic FSB detection code even for recent AMD CPUs. codeID: D_11 description: - Apple Software RAID support. codeID: D_12 description: - Nvidia andamp; ATI/AMD Graphics Card Enabler. codeID: D_13 description: - Module support codeID: D_14 description: - Memory detection adapted from memtest86: codeID: D_15 description: - Automatic P-State and C-State generation for native power management. codeID: D_16 description: - Message logging. codeID: D_17 description: The code is released under version 2 of the Gnu Public License. codeID: D_18 description: FAQ's: file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Themes description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: ko.lproj file: Welcome codeID: W_Im description: 애플 매킨토시 컴퓨터에 설치하지 마시오. codeID: W_Dv description: 개발자들 codeID: W_Tt description: 도움 주신분들 codeID: W_Pk description: 패키지 개발 codeID: W_Pb description: Package Built by codeID: W_Lt description: language 번역 by drew_afx file: Conclusion codeID: C_Ms description: 스크립트(설치)가 완료되었습니다. 선택된 파티션의 루트 디렉토리에 @LOG_FILENAME@를 생성하였습니다. 위 로그를 꼭 읽어보시고 설치가 정상적으로 되었는지 알아보신 후에 기록으로 잘 보관하시기 바랍니다. file: Description codeID: D_01 description: 카멜레온은 David Elliott의 fake EFI 구현 기술의 개발이 애플의 boot-132 프로젝트와 만나 생긴 요소들로 만들어진 부트로더입니다. codeID: D_02 description: 카멜레온 버전 2는 더 많은 기능들이 추가되었습니다. 예를 들어: codeID: D_03 description: - Darwin 부트로더에 완벽한 커스터마이징이 가능한 컬러 GUI. codeID: D_04 description: - 외부 프로그램 없이 자체적으로 램디스크에 리테일 DVD를 로딩하여 부팅. codeID: D_05 description: - 최대 절전 모드 지원. 맥 OS X이 썸네일로부터 깨어나는 모습을 즐기세요. codeID: D_06 description: - SMBIOS 오버라이드로 공장 SMBIOS 기초 설정들을 변경. codeID: D_07 description: - DSDT 오버라이드로 고쳐진 DSDT를 사용하므로써 많은 문제들을 해결. codeID: D_08 description: - device-properties string으로 디바이스 속성을 주입. codeID: D_09 description: - 하이브리드 boot0 / boot1h 로 MBR 및 GPT 로 파티션된 디스크들을 허용. codeID: D_10 description: - 최신 AMD CPU들까지도 자동 FSB 인식 코드로 지원. codeID: D_11 description: - 애플 소프트웨어 RAID 지원. codeID: D_12 description: - Nvidia 및 ATI/AMD 그래픽 카드 활성화. codeID: D_13 description: - 모듈 지원 codeID: D_14 description: - memtest86으로부터 기반된 RAM 메모리 인식 : (영문) http://www.memtest.org codeID: D_15 description: - 자동 P-State and C-State 생성기능으로 자연적인 전원 관리. codeID: D_16 description: - 메세지 로깅. codeID: D_17 description: 이 코드는 GNU 일반 공중 사용 허가서(GPL) 버전 2 아래 공개 되었습니다. codeID: D_18 description: FAQ's: file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Themes description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: mk.lproj file: Welcome codeID: W_Im description: Не инсталирајте на Apple Macintosh компјутер codeID: W_Dv description: Девелопери codeID: W_Tt description: Благодарност до codeID: W_Pk description: Пакет codeID: W_Pb description: Package Built by codeID: W_Lt description: language преведени од страна на kn6600 file: Conclusion codeID: C_Ms description: Скриптата е завршена и датотека со име @LOG_FILENAME@ е запишана во root на избраната партиција. Ве молиме прочитајте ја да дознаете дали инсталацијата е успешна и да имате евиденција за што е направено. file: Description codeID: D_01 description: Chameleon е комбинација од различни boot-loader компоненти. Базиран е на лажна EFI имплементација на David Elliott додадено на проектот boot-132 на Apple. codeID: D_02 description: Нови функции во Chameleon 2.0 codeID: D_03 description: - Потполно прилагодлив графички интерфејс кои придонесува за визуелни подобрувања на Darwin Bootloader-от. codeID: D_04 description: - Стартувањето на оригинални DVD-а дирекнто ја вчитува ramdisk сликата без помош од дополнителни програми. codeID: D_05 description: - Хибернација. Ужувајте во продолжувањето на работата на вашиот Mac OS X. codeID: D_06 description: - SMBIOS замена, за модифицирање на оригиналните SMBIOS вредности. codeID: D_07 description: - DSDT замена, за да користите модифициран DSDT, кој што решава повеќе проблеми. codeID: D_08 description: - Имплементирање на својства на уредите со посредство на device-properties стрингови. codeID: D_09 description: - Хибридни boot0 / boot1h за MBR и GPT партиционирани дискови. codeID: D_10 description: - Автоматско препознавање на FSB и за новите AMD процесори. codeID: D_11 description: - Поддршка на Apple Software RAID. codeID: D_12 description: - Nvidia and ATI/AMD Graphics Card Enabler. codeID: D_13 description: - Поддршка за модули. codeID: D_14 description: - Детекција на меморијата адаптирано од memtest86: http://www.memtest.org codeID: D_15 description: - Автоматско генерирање на P-State and C-State за природна контрола на процесорот. codeID: D_16 description: - Логирање на пораки. codeID: D_17 description: Овој код е објавен под верзијата 2 од Gnu Public License. codeID: D_18 description: За повеќе информации посетете ја веб страницата : file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Themes description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: nl.lproj file: Welcome codeID: W_Im description: Installeer niet op een echte Apple Macintosh computer! codeID: W_Dv description: Ontwikkelaars codeID: W_Tt description: Dank gaat uit naar codeID: W_Pk description: Package codeID: W_Pb description: Package Built by codeID: W_Lt description: language Vertaald door yeehaw123 and Badeendje file: Conclusion codeID: C_Ms description: De installatie is klaar en het bestand @LOG_FILENAME@ is geschreven naar de root van de door u gekozen partitie. Alstublieft lees het document om te zien of de installatie goed verlopen is en bewaar het als registratie. file: Description codeID: D_01 description: Chameleon is een combinatie van verschillende boot loader componenten. Het is gebaseerd op de fake EFI implementatie van David Elliott die toegevoegd is aan Apple's boot-123 project. codeID: D_02 description: Nieuwe functies in Chameleon 2.0. codeID: D_03 description: - Volledig aanpasbare GUI, zodat de Darwin Bootloader een mooier uiterlijk krijgt. codeID: D_04 description: - Het booten van retail DVD's door direct een ramdisk image te laden zonder hulp van extra programma's. codeID: D_05 description: - Slaapstand. Geniet van het hervatten van Mac OS X met een preview image. codeID: D_06 description: - Het negeren van het SMBIOS zodat de standaard SMBIOS waarden aangepast kunnen worden. codeID: D_07 description: - Het negeren van de DSDT zodat er een aangepaste verbeterde DSDT kan worden gebruikt om bepaalde problemen op te lossen. codeID: D_08 description: - Device Property Injection via device-properties string. codeID: D_09 description: - Hybride boot0 / boot1h voor MBR en GPT gepartitioneerde schijven. codeID: D_10 description: - automatische FSB detectie code, zelfs voor recente AMD processoren. codeID: D_11 description: - Apple Software RAID ondersteuning. codeID: D_12 description: - Nvidia and ATI/AMD graphische kaart autodetectie. codeID: D_13 description: - Module ondersteuning codeID: D_14 description: - Geheugen detectie overgenomen van memtest86: http://www.memtest.org codeID: D_15 description: - Automatisch P-State's and C-State's aangemaakt voor automatisch stroombeheer. codeID: D_16 description: - Bericht logboek. codeID: D_17 description: De code is vrijgegeven onder versie 2 van de Gnu Public License. codeID: D_18 description: Voor meer informatie, bezoek: file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Themes description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: pl.lproj file: Welcome codeID: W_Im description: Nie instaluj na komputerze Apple Macintosh codeID: W_Dv description: Developerzy codeID: W_Tt description: Podziękowania dla codeID: W_Pk description: Pakiet codeID: W_Pb description: Package Built by codeID: W_Lt description: language translated by janek202 file: Conclusion codeID: C_Ms description: Zakończono wykonywanie skryptów i plik logu @LOG_FILENAME@ został zapisany na głównym katalogu wybranej partycji. Proszę przeczytaj go by dowiedzieć się, czy instalacja przebiegła pomyślnie i zachowaj go jako zapis, co zostało wykonane. file: Description codeID: D_01 description: Chameleon jest połączeniem różnych komponentów boot loadera. Jest oparty na implementacji fake EFI Davida Elliotta dodanej do projektu boot-132 Apple'a. Chameleon jest rozszerzony o następujące funkcje: codeID: D_02 description: Nowe funkcje w Chameleonie 2.0 codeID: D_03 description: - Całkowicie konfigurowalne GUI by dodać trochę koloru do Bootloadera Darwin. codeID: D_04 description: - Uruchamianie płyt Retail DVD przez bezpośrednie ładowanie obrazu ramdisk bez pomocy dodatkowych programów. codeID: D_05 description: - Hibernacja. Ciesz się przywracaniem Twojego systemu Mac OS X z obrazu pamięci. codeID: D_06 description: - Zastąpienie SMBIOS by zmodyfikować jego fabryczne wartości. codeID: D_07 description: - Zastąpienie DSDT by móc używać zmodyfikowanego, poprawionego DSDT, który może rozwiązać parę problemów. codeID: D_08 description: - Wstrzykiwanie ustawień urządzeń (Device Property Injection) przez łańcuch device-properties. codeID: D_09 description: - Hybrydowe boot0 / boot1h dla dysków w układzie partycji MBR i GPT. codeID: D_10 description: - Automatyczne wykrywanie FSB nawet dla najnowszych procesorów AMD. codeID: D_11 description: - Obsługa Apple Software RAID. codeID: D_12 description: - Automatyczne uruchamianie kart NVIDII oraz ATI/AMD. codeID: D_13 description: - Wsparcie dla modułów. codeID: D_14 description: - Wykrywanie pamięci dostosowane z memtest86: http://www.memtest.org codeID: D_15 description: - Automatyczne generowanie stanów P-State and C-State w celu uzyskania natywnego zarządzania energią. codeID: D_16 description: - Logownie komunikatów. codeID: D_17 description: Kod jest publikowany z licencją Gnu Public License w wersji 2. codeID: D_18 description: By uzyskać bardziej dokładne informacje, odwiedź: file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Themes description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: pt-BR.lproj file: Welcome codeID: W_Im description: Não instale num computador Apple Macintosh codeID: W_Dv description: Desenvolvedores codeID: W_Tt description: Agradecimentos codeID: W_Pk description: Créditos pelos pacotes codeID: W_Pb description: Package Built by codeID: W_Lt description: language translated by oldnapalm file: Conclusion codeID: C_Ms description: Os scripts estão finalizados e foi gerado um ficheiro @LOG_FILENAME@ que se encontra na raiz da partição selecionada. Por Favor leia-o para verificar se a instalação foi realizada com sucesso e guarde como relatório do que foi realizado. file: Description codeID: D_01 description: O Chameleon é um boot loader que combina vários componentes. Ele é baseado na implementação de fake EFI feita por David Elliott, adicionada ao projeto boot-132 da Apple. O Chameleon é extendido com as seguintes características chave: codeID: D_02 description: Novos recursos no Chameleon 2.0 codeID: D_03 description: - Interface gráfica (GUI) totalmente personalizável para trazer algumas cores ao Bootloader Darwin. codeID: D_04 description: - Inicializa DVDs retail lendo uma imagem ramdisk diretamente, sem ajuda de nenhum programa adicional. codeID: D_05 description: - Hibernação. Aproveite continuar o seu Mac OS X com uma amostra de imagem da tela. codeID: D_06 description: - Substituição de SMBIOS para modificar os valores de fábrica. codeID: D_07 description: - Substituição de DSDT para usar uma tabela modificada que pode resolver diversos problemas. codeID: D_08 description: - Injeção de propriedades de dispositivo através do string device-properties. codeID: D_09 description: - boot0 / boot1h híbridos para discos particionados em MBR e GPT. codeID: D_10 description: - Detecção automática de FSB mesmo para processadores AMD recentes. codeID: D_11 description: - Suporte a Software RAID da Apple. codeID: D_12 description: - Ativação Placas Gráficas Nvidia and ATI/AMD. codeID: D_13 description: - Suporte de Modulos codeID: D_14 description: - Deteção Memoria adaptada de memtest86: http://www.memtest.org codeID: D_15 description: - P-State automático and Geração C-State para gestão de energia nativa. codeID: D_16 description: - Protocolo Mensagens. codeID: D_17 description: Este código é distribuido sobre os termos da versão 2 da Gnu Public License. codeID: D_18 description: Para informações detalhadas visite: file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Temas description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: pt-PT.lproj file: Welcome codeID: W_Im description: Não instale num computador Apple Macintosh codeID: W_Dv description: Desenvolvedores codeID: W_Tt description: Agradecimentos codeID: W_Pk description: Créditos pelos pacotes codeID: W_Pb description: Package Built by codeID: W_Lt description: language translated by artur-pt file: Conclusion codeID: C_Ms description: Os scripts estão finalizados e foi gerado um ficheiro @LOG_FILENAME@ que se encontra na raiz da partição selecionada. Por Favor leia-o para verificar se a instalação foi realizada com sucesso e guarde como relatório do que foi realizado. file: Description codeID: D_01 description: O Chameleon é um boot loader que combina vários componentes. Ele é baseado na implementação de fake EFI feita por David Elliott, adicionada ao projeto boot-132 da Apple. O Chameleon é extendido com as seguintes características chave: codeID: D_02 description: Novos recursos no Chameleon 2.0 codeID: D_03 description: - Interface gráfica (GUI) totalmente personalizável para trazer algumas cores ao Bootloader Darwin. codeID: D_04 description: - Inicializa DVDs retail lendo uma imagem ramdisk directamente, sem ajuda de nenhum programa adicional. codeID: D_05 description: - Hibernação. Desfrute de continuar o seu Mac OS X com uma amostra de imagem da tela. codeID: D_06 description: - Substituição de SMBIOS para modificar os valores de fábrica. codeID: D_07 description: - Substituicção de DSDT para usar uma tabela modificada que pode resolver diversos problemas. codeID: D_08 description: - Injecção de propriedades de dispositivo através do string device-properties. codeID: D_09 description: - boot0 / boot1h híbridos para discos particionados em MBR e GPT. codeID: D_10 description: - Detecção automática de FSB mesmo para processadores AMD recentes. codeID: D_11 description: - Suporte a Software RAID da Apple. codeID: D_12 description: - Ativação Placas Gráficas Nvidia and ATI/AMD. codeID: D_13 description: - Suporte de Modulos codeID: D_14 description: - Deteção Memoria adaptada de memtest86: http://www.memtest.org codeID: D_15 description: - P-State automático and Geração C-State para gestão de energia nativa. codeID: D_16 description: - Protocolo Mensagens. codeID: D_17 description: Este código é distribuido sobre os termos da versão 2 da Gnu Public License. codeID: D_18 description: Para informações detalhadas visite: file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Themes description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: ru.lproj file: Welcome codeID: W_Im description: Do not install to an Apple Macintosh computer codeID: W_Dv description: Developers codeID: W_Tt description: Thanks to codeID: W_Pk description: Package codeID: W_Pb description: Package Built by codeID: W_Lt description: language translated by ??? file: Conclusion codeID: C_Ms description: The scripts have completed and a file named @LOG_FILENAME@ has been written to the root of your chosen partition. Please read it to find out if the installation was successful and keep it for a record of what was done. file: Description codeID: D_01 description: Chameleon представляет собой комбинацию различных компонентов и основывается на эмуляции EFI реализованной Дэвидом Элиотом (David Elliott) интегрированной в оригинальный проект boot-132 от Apple. Chameleon включает в себя следующие улучшения: codeID: D_02 description: Новые возможности Chameleon 2.0 codeID: D_03 description: - Полностью изменяемый интерфейс пользователя для улучшения внешнего вида загрузчика Darwin. codeID: D_04 description: - Загрузка оригинального установочного диска Mac OS X без помощи посторонних программ. codeID: D_05 description: - Поддержка гибернации. codeID: D_06 description: - Переопределение фабричных параметров SMBIOS. codeID: D_07 description: - Возможность использования модифицированного DSDT для решения некоторых специфических проблем. codeID: D_08 description: - Инжекция Device Property Strings. codeID: D_09 description: - Гибридный boot0 / boot1h для разметок MBR и GPT. codeID: D_10 description: - Автоматическое определение FSB даже для процессоров AMD. codeID: D_11 description: - Поддержка программных RAID массивов Apple. codeID: D_12 description: - Nvidia and ATI/AMD Graphics Card Enabler. codeID: D_13 description: - Module support codeID: D_14 description: - Memory detection adapted from memtest86: http://www.memtest.org codeID: D_15 description: - Automatic P-State and C-State generation for native power management. codeID: D_16 description: - Message logging. codeID: D_17 description: The code is released under version 2 of the Gnu Public License. codeID: D_18 description: Более подробная информация по загрузчику: file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Themes description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: sr.lproj file: Welcome codeID: W_Im description: Instalacija nije prilagođena za Apple Macintosh računare codeID: W_Dv description: Programeri codeID: W_Tt description: Hvala codeID: W_Pk description: Paket codeID: W_Pb description: Package Built by codeID: W_Lt description: language translated by mistudio file: Conclusion codeID: C_Ms description: Skripte su završene i mapa pod nazivom @LOG_FILENAME@ je snimljena u koren particije diska koje ste odabrali. Molimo pročitajte kako biste saznali da li je instalacija bila uspešna i čuvajte log radi evidencije o tome šta je učinjeno file: Description codeID: D_01 description: Chameleon je kombinacija različitih komponenti bootloadera. On je zasnovan na David Elliottovoj lažnoj EFI implementaciji dodanoj u Apple boot-132 projekat. codeID: D_02 description: Nove funkcije u Chameleon 2.0 codeID: D_03 description: - Potpuno prilagođen grafički korisinički interfejs donosi vizuelna poboljšanja u Darwin Bootloaderu. codeID: D_04 description: - Start sa retail DVD-om direktno učitava ramdisk slike bez pomoći dodatnih programa. codeID: D_05 description: - Hibernacija. Uživajte u nastavaku rada vašeg Mac OS X-a sa pregledom slike. codeID: D_06 description: - SMBIOS zamena tvorničkih za modifikovanu SMBIOS vrednost. codeID: D_07 description: - DSDT zamena za korišćenje modifikovanog, ispravljenog DSDT-a koji može rešiti nekoliko problema. codeID: D_08 description: - Implementacija svojstva uređaja putem svojstva niza. codeID: D_09 description: - hibridni boot0 / boot1h za MBR i GPT particijske diskove. codeID: D_10 description: - automatsko FSB kodno otkrivanje čak i za poslednje AMD procesore. codeID: D_11 description: - Apple softver RAID podrška. codeID: D_12 description: - Nvidia and ATI/AMD Grafički Aktivator. codeID: D_13 description: - Modul podrška codeID: D_14 description: - Detekcija memorije prilagođena iz memtest86: http://www.memtest.org codeID: D_15 description: - Automatsko generisanje P-State i C-State za izvorno upravljanje energijom. codeID: D_16 description: - Prijava porukama. codeID: D_17 description: Kod je objavljen pod verzijom 2 GNU javna licenca. codeID: D_18 description: Za detaljne informacije posetite: file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Themes description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: zh_CN.lproj file: Welcome codeID: W_Im description: 请勿安装到 Apple 的 Macintosh 电脑 codeID: W_Dv description: 开发者 codeID: W_Tt description: 感谢 codeID: W_Pk description: 封装者 codeID: W_Pb description: Package Built by codeID: W_Lt description: language 翻译 crazybirdy, Ulimate file: Conclusion codeID: C_Ms description: 安装程序已经完成 并在选择安装的分区建立 @LOG_FILENAME@ 纪录文件。 请 详阅纪录文件 确认安装是否成功，并保留安装纪录文件备查。 file: Description codeID: D_01 description: Chameleon 是一个结合许多组件的开机引导器。这些组件的演变来自于 David Elliott 加入 Apple 的 boot-132 程序项目的 fake EFI 安装工具。 codeID: D_02 description: Chameleon v2 现在已经扩充了许多功能。例如： codeID: D_03 description: - 客制化的图形用户介面，为 Darwin Bootloader 带来更多的色彩。 codeID: D_04 description: - 无须其他程序，即可载入 ramdisk 来直接启动 零售版 DVD。 codeID: D_05 description: - 支持睡眠。 可使用睡眠映像恢复继续使用 Mac OS X 。 codeID: D_06 description: - 可使用修改过的 SMBIOS 覆盖 SMBIOS 之出厂设定值。 codeID: D_07 description: - 可使用修正过的 DSDT 覆盖原始 DSDT，并可解决许多问题。 codeID: D_08 description: - 可透过 device-properties string 自动注入设备属性。 codeID: D_09 description: - 支持 MBR 及 GPT 分区磁盘的 boot0 / boot1h 多重开机功能。 codeID: D_10 description: - 具有自动侦测 FSB 码功能，并可用于新式的 AMD CPU。 codeID: D_11 description: - 支持 Apple Software RAID 功能。 codeID: D_12 description: - 支持 Nvidia and ATI/AMD 显示卡启用功能。 codeID: D_13 description: - 支持模组功能。 codeID: D_14 description: - 支持改编自 memtest86: http://www.memtest.org 的内存侦测功能。 codeID: D_15 description: - 具有自动生成 P-State 及 C-State 的原生电源管理之功能。 codeID: D_16 description: - 具有信息纪录之功能。 codeID: D_17 description: 源代码依照 Gnu Public License v2 的原则释放于以下网站上。 codeID: D_18 description: 常见问题: file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Themes description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option language: zh_TW.lproj file: Welcome codeID: W_Im description: 請勿安裝到 Apple 的 Macintosh 電腦 codeID: W_Dv description: 開發者 codeID: W_Tt description: 感謝 codeID: W_Pk description: 封裝者 codeID: W_Pb description: Package Built by codeID: W_Lt description: language 翻譯 crazybirdy, Ulimate file: Conclusion codeID: C_Ms description: 安裝程序已經完成 並在選擇安裝的分割區建立 @LOG_FILENAME@ 紀錄文件。 請 詳閱紀錄文件 確認安裝是否成功，並保留安裝紀錄文件備查。 file: Description codeID: D_01 description: Chameleon 是一個結合許多組件的開機引導器。這些組件的演變來自於 David Elliott 加入 Apple 的 boot-132 程式項目的 fake EFI 安裝工具。 codeID: D_02 description: Chameleon v2 現在已經擴充了許多功能。例如： codeID: D_03 description: - 客製化的圖形使用者介面，為 Darwin Bootloader 帶來更多的色彩。 codeID: D_04 description: - 無須其他程式，即可載入 ramdisk 來直接啓動 零售版 DVD。 codeID: D_05 description: - 支持睡眠。 可使用睡眠映像恢復繼續使用 Mac OS X 。 codeID: D_06 description: - 可使用修改過的 SMBIOS 覆蓋 SMBIOS 之出廠設定值。 codeID: D_07 description: - 可使用修正過的 DSDT 覆蓋原始 DSDT，並可解決許多問題。 codeID: D_08 description: - 可透過 device-properties string 自動注入設備屬性。 codeID: D_09 description: - 支持 MBR 及 GPT 分割區磁盤的 boot0 / boot1h 多重開機功能。 codeID: D_10 description: - 具有自動偵測 FSB 碼功能，並可用於新式的 AMD CPU。 codeID: D_11 description: - 支持 Apple Software RAID 功能。 codeID: D_12 description: - 支持 Nvidia and ATI/AMD 顯示卡啓用功能。 codeID: D_13 description: - 支持模組功能。 codeID: D_14 description: - 支持改編自 memtest86: http://www.memtest.org 的記憶體偵測功能。 codeID: D_15 description: - 具有自動生成 P-State 及 C-State 的原生電源管理之功能。 codeID: D_16 description: - 具有訊息紀錄之功能。 codeID: D_17 description: 源代碼依照 Gnu Public License v2 的原則釋放於以下網站上。 codeID: D_18 description: 常見問題: file: LocalizableStrings messageName: ERROR_BOOTVOL description: This software must be installed on the startup volume. messageName: ERROR_INSTALL description: This volume does not meet the requirements for this update. messageName: Newer_Package_Installed_message description: A newer version of Chameleon is already installed. messageName: Intel_Mac_message description: This software cannot be installed on this computer. objectName: Chameleon_title objectTitle: Chameleon Bootloader description: Chameleon requires three essential files. (in simple terms), boot0 (On the drive's MBR) responsible for loading boot1. boot1 (On the partition's boot-sector) to finding boot2. boot2 (On the partition's root directory) for loading kernel etc. objectName: Standard_title objectTitle: Standard description: Install Chameleon's files to the root of the selected partition using either boot0 or boot0md depending on your system without destroying any existing Windows installation if you have one. objectName: noboot_title objectTitle: Don't install the Bootloader description: Useful if you only want to install the extra's. objectName: Module_title objectTitle: Modules description: The modules system incorporated in chameleon allows for a user or developer to extend the core functionality of chameleon without replacing the main boot file. objectName: AutoReso_title objectTitle: Resolution description: This module reads the edid information from the monitor attached to the main display. The module is currently not integrated into trunk and has minimal uses as it stands. Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting. objectName: klibc_title objectTitle: klibc description: This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient. This is currently only used by the uClibc++ library. Source: http://www.kernel.org/pub/linux/libs/klibc/ objectName: uClibc_title objectTitle: uClibc++ description: This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules. *Please note that rtti and exceptions has both been disabled. Source: http://cxx.uclibc.org/ .Dependencies: klibc objectName: Keymaps_title objectTitle: Keylayout description: Select one keylayout to use. This will also install the Keylayout module and keymaps. objectName: mac-de_title objectTitle: German Mac Keyboard description: Use the keyboard layout for a German Mac keyboard objectName: mac-es_title objectTitle: Spanish Mac Keyboard description: Use the keyboard layout for a Spanish Mac keyboard objectName: mac-fr_title objectTitle: French Mac Keyboard description: Use the keyboard layout for a French Mac keyboard objectName: mac-it_title objectTitle: Italian Mac Keyboard description: Use the keyboard layout for an Italian Mac keyboard objectName: mac-se_title objectTitle: Swedish Mac Keyboard description: Use the keyboard layout for a Swedish Mac keyboard objectName: pc-fr_title objectTitle: French PC Keyboard description: Use the keyboard layout for a French PC keyboard objectName: Themes_title objectTitle: Themes description: A collection of sample themes. More themes can be found at http://forum.voodooprojects.org/index.php/board,7.0.html objectName: Bullet_title objectTitle: Bullet description: A lovely simple theme by NoSmokingBandit from April 2009. objectName: Default_title objectTitle: Standard description: Chameleon default theme introduced for v2.0 RC5. objectName: Embed_title objectTitle: Embed description: A smaller simple version of the new default theme used when building a version of Chameleon which requires an embedded theme. objectName: Legacy_title objectTitle: Legacy description: Chameleon's original default theme introduced for v2.0 RC1. objectName: Options_title objectTitle: Settings description: Create an /Extra/org.chameleon.Boot.plist by selecting any of these boot options and kernel flags. objectName: Control_title objectTitle: Control Options description: Settings to control how Chameleon works. objectName: BootBanner_title objectTitle: BootBanner=No description: Hides Chameleon's boot banner in GUI. This is the text that is drawn at the top left corner of the screen displaying the release version etc. objectName: GUI_title objectTitle: GUI=No description: Disables the default enabled graphic user interface. objectName: LegacyLogo_title objectTitle: LegacyLogo=Yes description: Use the legacy 'dark grey' apple logo on the light grey screen for the boot process rather than the boot.png in the theme. objectName: InstantMenu_title objectTitle: InstantMenu=Yes description: By default, when Chameleon loads you'll see the icon for the current default partition, along with a timeout progress bar which left alone will count down before Chameleon automatically boots that partition. This options skips that and takes you directly to the device selection screen. objectName: QuietBoot_title objectTitle: QuietBoot=Yes description: Enable quiet boot mode (no messages or prompt). objectName: ShowInfo_title objectTitle: ShowInfo=Yes description: Enables display of partition and resolution details shown on the left side of the GUI under the boot banner. This is useful information for troubleshooting, though can clash with certain themes. objectName: Wait_title objectTitle: Wait=Yes description: Pauses the boot process after Chameleon has finished it's setup then waits for a key press before it starts the mach kernel. Useful when combined with verbose boot for troubleshooting. objectName: General_title objectTitle: General Options description: Choose from a selection of base options. objectName: arch_title objectTitle: arch=i386 description: Boots the kernel in 32bit mode rather than the default 64bit mode. objectName: EHCIacquire_title objectTitle: EHCIacquire=Yes description: Enables the option to fix any EHCI ownership issues due to bad bioses. objectName: EthernetBuiltIn_title objectTitle: EthernetBuiltIn=Yes description: Enables the option of adding 'built-in' to your ethernet devices. objectName: ForceHPET_title objectTitle: ForceHPET=Yes description: Enables HPET on intel chipsets, for bioses that dont include the option. objectName: ForceWake_title objectTitle: ForceWake=Yes description: his option enables you to bypass bad sleep images. objectName: RestartFix_title objectTitle: RestartFix=No description: Disables the automatically enabled restart fix. objectName: UHCIreset_title objectTitle: UHCIreset=Yes description: Enables the option to reset UHCI controllers before starting OS X. objectName: UseMemDetect_title objectTitle: UseMemDetect=No description: Disables the automatically enabled RAM recognition. objectName: UseKernelCache_title objectTitle: UseKernelCache=Yes description: For Lion only. Enables loading of the pre-linked kernel. This will ignore /E/E and /S/L/E. ONLY use this is you have know it contains everything you need. objectName: Wake_title objectTitle: Wake=Yes description: Attempts to load the sleep image saved from last hibernation. objectName: KernelFlags_title objectTitle: Kernel Flags description: Choose from a selection of kernel flags. objectName: Verbose_title objectTitle: Verbose Mode description: Turns on verbose logging and allows you to see messages from both Chameleon and the OS X kernel at boot time. Essential for troubleshooting. objectName: Singleusermode_title objectTitle: Single User Mode description: A troubleshooting option used for booting into OS X's BSD/Unix command line. objectName: Ignorecaches_title objectTitle: Ignore Caches description: Not an option that's needed for everyday booting, but it can be useful if you want OS X to load all files from it's system folders, rather than relying on it's pre-built caches. objectName: Npci_title objectTitle: npci=0x2000 description: For overcoming a hang at 'PCI configuration begin' on some systems. 0x2000 is the kIOPCIConfiguratorPFM64 flag, as seen in the IOPCIFamily source code. objectName: Darkwake_title objectTitle: darkwake=0 description: Lion only. Disables the 'low power wake' feature which can sometimes leave the screen black after wake from sleep. objectName: PowerManagement_title objectTitle: Power Management description: A selection of options that deal with power management and speedstep. objectName: CSTUsingSystemIO_title objectTitle: Generate C-States=Yes description: New C-State _CST generation method using SystemIO registers instead of FixedHW. objectName: DropSSDT_title objectTitle: DropSSDT=Yes description: Discard the motherboard's built-in SSDT tables. objectName: EnableC2State_title objectTitle: EnableC2State=Yes description: Enable specific Processor power state, C2. objectName: EnableC3State_title objectTitle: EnableC3State=Yes description: Enable specific Processor power state, C3. objectName: EnableC4State_title objectTitle: EnableC4State=Yes description: Enable specific Processor power state, C4. objectName: GenerateCStates_title objectTitle: Generate C-States=Yes description: Enable auto generation of processor idle sleep states (C-States). objectName: GeneratePStates_title objectTitle: Generate P-States=Yes description: Enable auto generation of processor power performance states (P-States). objectName: Resolution_title objectTitle: Resolution description: Set one resolution to use. objectName: 1024x600x32_title objectTitle: 1024x600x32 description: Set Graphics Mode to 1024x600x32 objectName: 1024x768x32_title objectTitle: 1024x768x32 description: Set Graphics Mode to 1024x768x32 objectName: 1280x768x32_title objectTitle: 1280x768x32 description: Set Graphics Mode to 1280x768x32 objectName: 1280x800x32_title objectTitle: 1280x800x32 description: Set Graphics Mode to 1280x800x32 objectName: 1280x1024x32_title objectTitle: 1280x1024x32 description: Set Graphics Mode to 1280x1024x32 objectName: 1280x960x32_title objectTitle: 1280x960x32 description: Set Graphics Mode to 1280x960x32 objectName: 1440x900x32_title objectTitle: 1440x900x32 description: Set Graphics Mode to 1440x900x32 objectName: 1600x900x32_title objectTitle: 1600x900x32 description: Set Graphics Mode to 1600x900x32 objectName: 1680x1050x32_title objectTitle: 1680x1050x32 description: Set Graphics Mode to 1680x1050x32 objectName: 1920x1080x32_title objectTitle: 1920x1080x32 description: Set Graphics Mode to 1920x1080x32 objectName: 1920x1200x32_title objectTitle: 1920x1200x32 description: Set Graphics Mode to 1920x1200x32 objectName: Video_title objectTitle: Video description: A selection of options that deal with video. objectName: GraphicsEnabler_title objectTitle: GraphicsEnabler=Yes description: Enables the option to autodetect NVIDIA based GPUs and inject the correct info. objectName: UseAtiROM_title objectTitle: UseAtiROM=Yes description: Enables UseAtiROM options. objectName: UseNvidiaROM_title objectTitle: UseNvidiaROM=Yes description: Enables UseNvidiaROM options. objectName: VBIOS_title objectTitle: VBIOS=Yes description: Enables VBIOS option