Chameleon

Chameleon Svn Source Tree

Root/branches/Chimera/i386/include/IOKit/scsi/SCSICommandOperationCodes.h

1/*␊
2 * Copyright (c) 2001-2009 Apple Inc. All rights reserved.␊
3 *␊
4 * @APPLE_LICENSE_HEADER_START@␊
5 * ␊
6 * This file contains Original Code and/or Modifications of Original Code␊
7 * as defined in and that are subject to the Apple Public Source License␊
8 * Version 2.0 (the 'License'). You may not use this file except in␊
9 * compliance with the License. Please obtain a copy of the License at␊
10 * http://www.opensource.apple.com/apsl/ and read it before using this␊
11 * file.␊
12 * ␊
13 * The Original Code and all software distributed under the License are␊
14 * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER␊
15 * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,␊
16 * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,␊
17 * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.␊
18 * Please see the License for the specific language governing rights and␊
19 * limitations under the License.␊
20 * ␊
21 * @APPLE_LICENSE_HEADER_END@␊
22 */␊
23␊
24#ifndef _SCSI_COMMAND_OPERATION_CODES_H_␊
25#define _SCSI_COMMAND_OPERATION_CODES_H_␊
26␊
27#pragma mark About this file␊
28/* This file contains the operation code definitions for all commands defined␊
29 * by the SCSI specifications. The commands are listed in three formats:␊
30 * 1) All commands are listed in alphabetical order. This list is the live␊
31 * enumeration for all of the command constants.␊
32 * 2) The commands are listed in ascending numerical order.␊
33 * 3) The commands are grouped by Peripheral Device Type.␊
34 * ␊
35 * In the command listings by Peripheral Device Type, there will be a comment␊
36 * following each command. This comment indentifies the section of the related␊
37 * specification where the commands is defined and the requirement type of the␊
38 * command, Mandatory or Optional.␊
39 * If a specification redefines an optional command from SPC as mandatory,␊
40 * the command will be relisted in the Peripheral Device Type command list with␊
41 * the mandatory tag next to it.␊
42 * All commands that are listed in SPC as Device Type Specifc will be relisted␊
43 * as a comment in all specifications lists that support that command with the␊
44 * appropriate Mandatory or Optional tag for that specification.␊
45 *␊
46 * The section number and the requirement type of the command are based on the ␊
47 * version of the specification listed in the header comment for the Peripheral␊
48 * Device Type. This data is provided for informational purposes only. The ␊
49 * specification document and version that the device adheres to as indicated ␊
50 * by the data returned in response to the INQUIRY command should be used as␊
51 * the authorative source for supported and required behavior of the device.␊
52 * ␊
53 * The SPC set is listed before all other Peripheral Device Type commands as␊
54 * this is the base document from which all of the other documents are derived. ␊
55 *␊
56 * The Peripheral Device Types and associated command sets as defined by SPC-2,␊
57 * section 7.4.1 are as follows:␊
58 * Peripheral Device Type Associated Command Specification␊
59 * ------------------------------------ -----------------------------------␊
60 * 0x00 Direct Access Device SBC - SCSI-3 Block Commands␊
61 * 0x01 Sequential Access Device SSC - SCSI-3 Stream Commands␊
62 * 0x02 Printer Device SSC - SCSI-3 Stream Commands␊
63 * 0x03 Processor Device SPC - SCSI Primary Commands-2␊
64 * 0x04 Write Once Device SBC - SCSI-3 Block Commands␊
65 * 0x05 CD-ROM Device MMC - SCSI Multimedia Commands-2␊
66 * 0x06 Scanner Device SGC - SCSI-3 Graphics Commands␊
67 * 0x07 Optical Memory Device SBC - SCSI-3 Block Commands␊
68 * 0x08 Medium Changer Device SMC - SCSI-3 Medium Changer Cmds␊
69 * 0x09 Communications Device SSC - SCSI-3 Stream Commands␊
70 * 0x0A - 0x0B Graphic Arts Prepress Dev ASC IT8␊
71 * 0x0C Storage Array Controller Device SCC-2 - SCSI Controller Commands-2␊
72 * 0x0D Enclosure Services SES - SCSI-3 Enclosure Services␊
73 * 0x0E Simplified Direct Access Device RBC - SCSI Reduced Block Commands␊
74 * 0x0F Optical Card Reader/Writer Device OCRW - SCSI Specification for ␊
75 * Optical Card Reader/Writer␊
76 * 0x10 Reserved ␉␉No command specification␊
77 *␉0x11 Object-Based Storage Device␉␉OSD - SCSI Object Based Storage ␊
78 *␉␉␉␉␉␉␉␉␉␉␉␉Device Commands␊
79 * 0x12 - 0x14 Reserved No command specification␊
80 * 0x15 Multimedia Media Access Engine RMC - Reduced Multimedia Commands␊
81 * 0x16 - 0x1E Reserved No command specification␊
82 * 0x1F Unknown or No Device No command specification␊
83 */ ␊
84␊
85#pragma mark -␊
86#pragma mark Command Definitions by Name␊
87/* All SCSI Commands listed in alphabetical order. These are the live␊
88 * definitions of the commands. All other command lists are informative.␊
89 */␊
90enum ␊
91{␊
92 kSCSICmd_ACCESS_CONTROL_IN = 0x86,␊
93 kSCSICmd_ACCESS_CONTROL_OUT = 0x87,␊
94 kSCSICmd_BLANK = 0xA1,␊
95 kSCSICmd_CHANGE_DEFINITION = 0x40,␊
96 kSCSICmd_CLOSE_TRACK_SESSION = 0x5B,␊
97 kSCSICmd_COMPARE = 0x39,␊
98 kSCSICmd_COPY = 0x18,␊
99 kSCSICmd_COPY_AND_VERIFY = 0x3A,␊
100 kSCSICmd_ERASE_10␉␉␉␉␉␉= 0x2C,␊
101 kSCSICmd_ERASE_12␉␉␉␉␉␉= 0xAC,␊
102 kSCSICmd_EXTENDED_COPY = 0x83,␊
103 kSCSICmd_FORMAT_UNIT = 0x04,␊
104 kSCSICmd_GET_CONFIGURATION = 0x46,␊
105 kSCSICmd_GET_EVENT_STATUS_NOTIFICATION = 0x4A,␊
106 kSCSICmd_GET_PERFORMANCE = 0xAC,␊
107 kSCSICmd_INQUIRY = 0x12,␊
108 kSCSICmd_LOAD_UNLOAD_MEDIUM = 0xA6,␊
109 kSCSICmd_LOCK_UNLOCK_CACHE = 0x36,␊
110 kSCSICmd_LOCK_UNLOCK_CACHE_16 = 0x92,␊
111 kSCSICmd_LOG_SELECT = 0x4C,␊
112 kSCSICmd_LOG_SENSE = 0x4D,␊
113 kSCSICmd_MAINTENANCE_IN ␉= 0xA3,␊
114 kSCSICmd_MAINTENANCE_OUT = 0xA4,␊
115 kSCSICmd_MECHANISM_STATUS = 0xBD,␊
116 kSCSICmd_MEDIUM_SCAN = 0x38,␊
117 kSCSICmd_MODE_SELECT_6 = 0x15,␊
118 kSCSICmd_MODE_SELECT_10 = 0x55,␊
119 kSCSICmd_MODE_SENSE_6 = 0x1A,␊
120 kSCSICmd_MODE_SENSE_10 = 0x5A,␊
121 kSCSICmd_MOVE_MEDIUM_ATTACHED = 0xA7,␊
122 kSCSICmd_PAUSE_RESUME = 0x4B,␊
123 kSCSICmd_PERSISTENT_RESERVE_IN = 0x5E,␊
124 kSCSICmd_PERSISTENT_RESERVE_OUT = 0x5F,␊
125 kSCSICmd_PLAY_AUDIO_10 = 0x45,␊
126 kSCSICmd_PLAY_AUDIO_12 = 0xA5,␊
127 kSCSICmd_PLAY_AUDIO_MSF = 0x47,␊
128 kSCSICmd_PLAY_AUDIO_TRACK_INDEX = 0x48,␊
129 kSCSICmd_PLAY_CD = 0xBC,␊
130 kSCSICmd_PLAY_RELATIVE_10 = 0x49,␊
131 kSCSICmd_PLAY_RELATIVE_12 = 0xA9,␊
132 kSCSICmd_PREFETCH = 0x34,␊
133 kSCSICmd_PREFETCH_16 = 0x90,␊
134 kSCSICmd_PREVENT_ALLOW_MEDIUM_REMOVAL = 0x1E,␊
135 kSCSICmd_READ_6 = 0x08,␊
136 kSCSICmd_READ_10 = 0x28,␊
137 kSCSICmd_READ_12 = 0xA8,␊
138 kSCSICmd_READ_16 = 0x88,␊
139 kSCSICmd_READ_ATTRIBUTE = 0x8C,␊
140 kSCSICmd_READ_BUFFER = 0x3C,␊
141 kSCSICmd_READ_BUFFER_CAPACITY = 0x5C,␊
142 kSCSICmd_READ_CAPACITY = 0x25,␊
143 kSCSICmd_READ_CD = 0xBE,␊
144 kSCSICmd_READ_CD_MSF = 0xB9,␊
145 kSCSICmd_READ_DEFECT_DATA_10 = 0x37,␊
146 kSCSICmd_READ_DEFECT_DATA_12 = 0xB7,␊
147 kSCSICmd_READ_DISC_INFORMATION = 0x51,␊
148 kSCSICmd_READ_DVD_STRUCTURE = 0xAD,␊
149 kSCSICmd_READ_DISC_STRUCTURE = 0xAD,␊
150 kSCSICmd_READ_ELEMENT_STATUS_ATTACHED = 0xB4,␊
151 kSCSICmd_READ_FORMAT_CAPACITIES = 0x23,␊
152 kSCSICmd_READ_GENERATION␉␉␉␉= 0x29,␊
153 kSCSICmd_READ_HEADER = 0x44,␊
154 kSCSICmd_READ_LONG = 0x3E,␊
155 kSCSICmd_READ_MASTER_CUE = 0x59,␊
156 kSCSICmd_READ_SUB_CHANNEL = 0x42,␊
157 kSCSICmd_READ_TOC_PMA_ATIP = 0x43,␊
158 kSCSICmd_READ_TRACK_INFORMATION = 0x52,␊
159 kSCSICmd_READ_UPDATED_BLOCK_10␉␉␉= 0x2D,␊
160 kSCSICmd_REASSIGN_BLOCKS = 0x07,␊
161 kSCSICmd_REBUILD = 0x81,␊
162 kSCSICmd_RECEIVE = 0x08,␊
163 kSCSICmd_RECEIVE_COPY_RESULTS = 0x84,␊
164 kSCSICmd_RECEIVE_DIAGNOSTICS_RESULTS = 0x1C,␊
165 kSCSICmd_REDUNDANCY_GROUP_IN␉␉␉= 0xBA,␊
166 kSCSICmd_REDUNDANCY_GROUP_OUT␉␉␉= 0xBB,␊
167 kSCSICmd_REGENERATE = 0x82,␊
168 kSCSICmd_RELEASE_6 = 0x17,␊
169 kSCSICmd_RELEASE_10 = 0x57,␊
170 kSCSICmd_REPAIR_TRACK = 0x58,␊
171 kSCSICmd_REPORT_DEVICE_IDENTIFIER ␉= 0xA3,␊
172 kSCSICmd_REPORT_KEY = 0xA4,␊
173 kSCSICmd_REPORT_LUNS = 0xA0, ␊
174 kSCSICmd_REQUEST_SENSE = 0x03,␊
175 kSCSICmd_RESERVE_6 = 0x16,␊
176 kSCSICmd_RESERVE_10 = 0x56,␊
177 kSCSICmd_RESERVE_TRACK = 0x53,␊
178 kSCSICmd_REZERO_UNIT = 0x01,␊
179 kSCSICmd_SCAN_MMC = 0xBA,␊
180 kSCSICmd_SEARCH_DATA_EQUAL_10 = 0x31,␊
181 kSCSICmd_SEARCH_DATA_EQUAL_12 = 0xB1,␊
182 kSCSICmd_SEARCH_DATA_HIGH_10 = 0x30,␊
183 kSCSICmd_SEARCH_DATA_HIGH_12 = 0xB0,␊
184 kSCSICmd_SEARCH_DATA_LOW_10 = 0x32,␊
185 kSCSICmd_SEARCH_DATA_LOW_12 = 0xB2,␊
186 kSCSICmd_SEEK_6 = 0x0B,␊
187 kSCSICmd_SEEK_10 = 0x2B,␊
188 kSCSICmd_SEND = 0x0A,␊
189 kSCSICmd_SEND_CUE_SHEET = 0x5D,␊
190 kSCSICmd_SEND_DIAGNOSTICS = 0x1D,␊
191 kSCSICmd_SEND_DVD_STRUCTURE = 0xBF,␊
192 kSCSICmd_SEND_EVENT = 0xA2,␊
193 kSCSICmd_SEND_KEY = 0xA3,␊
194 kSCSICmd_SEND_OPC_INFORMATION = 0x54,␊
195 kSCSICmd_SERVICE_ACTION_IN␉␉ = 0x9E,␊
196 kSCSICmd_SERVICE_ACTION_OUT␉␉ = 0x9F,␊
197 kSCSICmd_SET_CD_SPEED = 0xBB,␊
198 kSCSICmd_SET_DEVICE_IDENTIFIER ␉= 0xA4,␊
199 kSCSICmd_SET_LIMITS_10 = 0x33,␊
200 kSCSICmd_SET_LIMITS_12 = 0xB3,␊
201 kSCSICmd_SET_READ_AHEAD = 0xA7,␊
202 kSCSICmd_SET_STREAMING = 0xB6,␊
203 kSCSICmd_SPARE_IN␉␉ = 0xBC,␊
204 kSCSICmd_SPARE_OUT␉␉ = 0xBD,␊
205 kSCSICmd_START_STOP_UNIT = 0x1B,␊
206 kSCSICmd_STOP_PLAY_SCAN = 0x4E,␊
207 kSCSICmd_SYNCHRONIZE_CACHE = 0x35,␊
208 kSCSICmd_SYNCHRONIZE_CACHE_16 = 0x91,␊
209 kSCSICmd_TEST_UNIT_READY = 0x00,␊
210␉kSCSICmd_UPDATE_BLOCK␉␉␉␉␉= 0x3D,␊
211 kSCSICmd_VERIFY_10 = 0x2F,␊
212 kSCSICmd_VERIFY_12 = 0xAF,␊
213 kSCSICmd_VERIFY_16 = 0x8F,␊
214 kSCSICmd_VOLUME_SET_IN = 0xBE,␊
215 kSCSICmd_VOLUME_SET_OUT = 0xBF,␊
216 kSCSICmd_WRITE_6 = 0x0A,␊
217 kSCSICmd_WRITE_10 = 0x2A,␊
218 kSCSICmd_WRITE_12 = 0xAA,␊
219 kSCSICmd_WRITE_16 = 0x8A,␊
220 kSCSICmd_WRITE_AND_VERIFY_10 = 0x2E,␊
221␉kSCSICmd_WRITE_AND_VERIFY_12 = 0xAE,␊
222␉kSCSICmd_WRITE_AND_VERIFY_16 = 0x8E,␊
223␉kSCSICmd_WRITE_ATTRIBUTE␉ = 0x8D,␊
224 kSCSICmd_WRITE_BUFFER = 0x3B,␊
225 kSCSICmd_WRITE_LONG = 0x3F,␊
226 kSCSICmd_WRITE_SAME = 0x41,␊
227 kSCSICmd_WRITE_SAME_16 = 0x93,␊
228 kSCSICmd_XDREAD = 0x52,␊
229 kSCSICmd_XDWRITE = 0x50,␊
230 kSCSICmd_XDWRITE_EXTENDED = 0x80,␊
231 kSCSICmd_XDWRITEREAD_10 ␉␉= 0x53,␊
232 kSCSICmd_XPWRITE = 0x51,␊
233 ␊
234 kSCSICmdVariableLengthCDB␉␉␉␉= 0x7F␊
235};␊
236␊
237/* Service Action Definitions for the Variable Length CDB (7Fh) command */␊
238enum␊
239{␊
240␉kSCSIServiceAction_READ_32␉␉␉␉= 0x0009,␊
241␉kSCSIServiceAction_VERIFY_32␉␉␉= 0x000A,␊
242␉kSCSIServiceAction_WRITE_32␉␉␉␉= 0x000B,␊
243␉kSCSIServiceAction_WRITE_AND_VERIFY_32␉= 0x000C,␊
244␉kSCSIServiceAction_WRITE_SAME_32␉␉= 0x000D,␊
245␉kSCSIServiceAction_XDREAD_32␉␉␉= 0x0003,␊
246␉kSCSIServiceAction_XDWRITE_32␉␉␉= 0x0004,␊
247␉kSCSIServiceAction_XDWRITEREAD_32␉␉= 0x0007,␊
248␉kSCSIServiceAction_XPWRITE_32␉␉␉= 0x0006␊
249};␊
250␊
251/* Service Action Definitions for the MAINTENANCE IN (A3h) command */␊
252enum␊
253{␊
254␉kSCSIServiceAction_REPORT_ALIASES␉␉␉␉␉␉␉␉= 0x0B,␊
255␉kSCSIServiceAction_REPORT_DEVICE_IDENTIFIER␉␉␉␉␉␉= 0x05,␊
256␉kSCSIServiceAction_REPORT_PRIORITY␉␉␉␉␉␉␉␉= 0x0E,␊
257␉kSCSIServiceAction_REPORT_SUPPORTED_OPERATION_CODES␉␉␉␉= 0x0C,␊
258␉kSCSIServiceAction_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS␉= 0x0D,␊
259␉kSCSIServiceAction_REPORT_TARGET_PORT_GROUPS␉␉␉␉␉= 0x0A␊
260};␊
261␊
262/* Service Action Definitions for the MAINTENANCE OUT (A4h) command */␊
263enum␊
264{␊
265␉kSCSIServiceAction_CHANGE_ALIASES␉␉␉= 0x0B,␊
266␉kSCSIServiceAction_SET_DEVICE_IDENTIFIER␉= 0x06,␊
267␉kSCSIServiceAction_SET_PRIORITY␉␉␉␉= 0x0E,␊
268␉kSCSIServiceAction_SET_TARGET_PORT_GROUPS␉= 0x0A␉␊
269};␊
270␊
271/* Service Action Definitions for the SERVICE ACTION IN (9Eh) command */␊
272enum␊
273{␊
274␉kSCSIServiceAction_READ_CAPACITY_16␉␉= 0x10,␊
275␉kSCSIServiceAction_READ_LONG_16␉␉␉= 0x11␉␊
276};␊
277␊
278/* Service Action Definitions for the SERVICE ACTION OUT (9Fh) command */␊
279enum␊
280{␊
281␉kSCSIServiceAction_WRITE_LONG_16␉␉= 0x11␉␊
282};␊
283␊
284#pragma mark -␊
285#pragma mark Command Definitions by Number␊
286#if 0␊
287enum ␊
288{␊
289};␊
290#endif␊
291␊
292␊
293#pragma mark -␊
294#pragma mark All Types SPC Commands␊
295/* Commands defined by the T10:1236-D SCSI Primary Commands-2 (SPC-2) ␊
296 * command specification. The definitions and section numbers are based on␊
297 * section 7 of the revision 18, 21 May 2000 version of the specification.␊
298 *␊
299 * These commands are defined for all devices.␊
300 */␊
301#if 0␊
302enum ␊
303{␊
304 kSCSICmd_CHANGE_DEFINITION = 0x40, /* Obsolete */␊
305 kSCSICmd_COMPARE = 0x39, /* Sec. 7.2: Optional */␊
306 kSCSICmd_COPY = 0x18, /* Sec. 7.3: Optional */␊
307 kSCSICmd_COPY_AND_VERIFY = 0x3A, /* Sec. 7.4: Optional */␊
308 kSCSICmd_EXTENDED_COPY = 0x83, /* Sec. 7.5: Optional */␊
309 kSCSICmd_INQUIRY = 0x12, /* Sec. 7.6: Mandatory */␊
310 kSCSICmd_LOG_SELECT = 0x4C, /* Sec. 7.7: Optional */␊
311 kSCSICmd_LOG_SENSE = 0x4D, /* Sec. 7.8: Optional */␊
312 kSCSICmd_MODE_SELECT_6 = 0x15, /* Sec. 7.9: Device Type␊
313 * Specific */␊
314 kSCSICmd_MODE_SELECT_10 = 0x55, /* Sec. 7.10: Device Type␊
315 * Specific */␊
316 kSCSICmd_MODE_SENSE_6 = 0x1A, /* Sec. 7.11: Device Type␊
317 * Specific */␊
318 kSCSICmd_MODE_SENSE_10 = 0x5A, /* Sec. 7.12: Device Type␊
319 * Specific */␊
320 kSCSICmd_MOVE_MEDIUM_ATTACHED = 0xA7, /* Defined in SMC */␊
321 kSCSICmd_PERSISTENT_RESERVE_IN = 0x5E, /* Sec. 7.13: Device Type␊
322 * Specific */␊
323 kSCSICmd_PERSISTENT_RESERVE_OUT = 0x5F, /* Sec. 7.14: Device Type␊
324 * Specific */␊
325 kSCSICmd_PREVENT_ALLOW_MEDIUM_REMOVAL = 0x1E, /* Sec. 7.15: Device Type␊
326 * Specific */␊
327 kSCSICmd_READ_BUFFER = 0x3C, /* Sec. 7.16: Optional */␊
328 kSCSICmd_READ_ELEMENT_STATUS_ATTACHED = 0xB4, /* Defined in SMC */␊
329 kSCSICmd_RECEIVE_COPY_RESULTS = 0x84, /* Sec. 7.17: Optional */␊
330 kSCSICmd_RECEIVE_DIAGNOSTICS_RESULTS = 0x1C, /* Sec. 7.18: Optional */␊
331 kSCSICmd_RELEASE_10 = 0x57, /* Sec. 7.19: Device Type␊
332 * Specific */␊
333 kSCSICmd_RELEASE_6 = 0x17, /* Sec. 7.20: Device Type␊
334 * Specific */␊
335 kSCSICmd_REPORT_DEVICE_IDENTIFIER ␉= 0xA3, /* Sec. 7.21: Optional */␊
336 kSCSICmd_REPORT_LUNS = 0xA0, /* Sec. 7.22: Mandatory for␊
337 * LUN Supporting devices*/␊
338 kSCSICmd_REQUEST_SENSE = 0x03, /* Sec. 7.23: Device Type␊
339 * Specific */␊
340 kSCSICmd_RESERVE_10 = 0x56, /* Sec. 7.24: Device Type␊
341 * Specific */␊
342 kSCSICmd_RESERVE_6 = 0x16, /* Sec. 7.25: Device Type␊
343 * Specific */␊
344 kSCSICmd_SEND_DIAGNOSTICS = 0x1D, /* Sec. 7.26: Optional */␊
345 kSCSICmd_SET_DEVICE_IDENTIFIER ␉= 0xA4, /* Sec. 7.27: Optional */␊
346 kSCSICmd_TEST_UNIT_READY = 0x00, /* Sec. 7.28: Mandatory */␊
347 kSCSICmd_WRITE_BUFFER = 0x3B /* Sec. 7.29: Optional */␊
348};␊
349#endif␊
350␊
351#pragma mark -␊
352#pragma mark 0x00 SBC Direct Access Commands␊
353/* Commands defined by the T10:990-D SCSI-3 Block Commands (SBC) command␊
354 * specification. The definitions and section numbers are based on section 6.1␊
355 * of the revision 8c, 13 November 1997 version of the specification. ␊
356 */␊
357#if 0␊
358enum␊
359{␊
360 kSCSICmd_CHANGE_DEFINITION = 0x40, /* Obsolete */␊
361 kSCSICmd_COMPARE = 0x39, /* SPC: Optional */␊
362 kSCSICmd_COPY = 0x18, /* SPC: Optional */␊
363 kSCSICmd_COPY_AND_VERIFY = 0x3A, /* SPC: Optional*/␊
364 kSCSICmd_FORMAT_UNIT = 0x04, /* Sec. 6.1.1: Mandatory */␊
365 kSCSICmd_INQUIRY = 0x12, /* SPC: Mandatory */␊
366 kSCSICmd_LOCK_UNLOCK_CACHE = 0x36, /* Sec. 6.1.2: Optional */␊
367 kSCSICmd_LOG_SELECT = 0x4C, /* SPC: Optional */␊
368 kSCSICmd_LOG_SENSE = 0x4D, /* SPC: Optional */␊
369 kSCSICmd_MODE_SELECT_6 = 0x15, /* SPC: Optional */␊
370 kSCSICmd_MODE_SELECT_10 = 0x55, /* SPC: Optional */␊
371 kSCSICmd_MODE_SENSE_6 = 0x1A, /* SPC: Optional */␊
372 kSCSICmd_MODE_SENSE_10 = 0x5A, /* SPC: Optional */␊
373 kSCSICmd_MOVE_MEDIUM_ATTACHED = 0xA7, /* SMC: Optional */␊
374 kSCSICmd_PERSISTENT_RESERVE_IN = 0x5E, /* SPC: Optional */␊
375 kSCSICmd_PERSISTENT_RESERVE_OUT = 0x5F, /* SPC: Optional */␊
376 kSCSICmd_PREFETCH = 0x34, /* Sec. 6.1.3: Optional */␊
377 kSCSICmd_PREVENT_ALLOW_MEDIUM_REMOVAL = 0x1E, /* SPC: Optional */␊
378 kSCSICmd_READ_6 = 0x08, /* Sec. 6.1.4: Mandatory */␊
379 kSCSICmd_READ_10 = 0x28, /* Sec. 6.1.5: Mandatory */␊
380 kSCSICmd_READ_12 = 0xA8, /* Sec. 6.2.4: Optional */␊
381 kSCSICmd_READ_BUFFER = 0x3C, /* SPC: Optional */␊
382 kSCSICmd_READ_CAPACITY = 0x25, /* Sec. 6.1.6: Mandatory */␊
383 kSCSICmd_READ_DEFECT_DATA_10 = 0x37, /* Sec. 6.1.7: Optional */␊
384 kSCSICmd_READ_DEFECT_DATA_12 = 0xB7, /* Sec. 6.2.5: Optional */␊
385 kSCSICmd_READ_ELEMENT_STATUS_ATTACHED = 0xB4, /* SMC: Optional */␊
386 kSCSICmd_READ_GENERATION␉␉␉␉= 0x29,␉/* Sec. 6.2.6: Optional */␊
387 kSCSICmd_READ_LONG = 0x3E, /* Sec. 6.1.8: Optional */␊
388 kSCSICmd_READ_UPDATED_BLOCK_10␉␉␉= 0x2D, /* Sec. 6.2.7: Optional */␊
389 kSCSICmd_REASSIGN_BLOCKS = 0x07, /* Sec. 6.1.9: Optional */␊
390 kSCSICmd_REBUILD = 0x81, /* Sec. 6.1.10: Optional */␊
391 kSCSICmd_RECEIVE_DIAGNOSTICS_RESULTS = 0x1C, /* SPC: Optional */␊
392 kSCSICmd_REGENERATE = 0x82, /* Sec. 6.1.11: Optional */␊
393 kSCSICmd_RELEASE_6 = 0x17, /* SPC: Optional */␊
394 kSCSICmd_RELEASE_10 = 0x57, /* SPC: Mandatory */␊
395 kSCSICmd_REPORT_LUNS = 0xA0, /* SPC: Optional */␊
396 kSCSICmd_REQUEST_SENSE = 0x03, /* SPC: Mandatory */␊
397 kSCSICmd_RESERVE_6 = 0x16, /* SPC: Optional */␊
398 kSCSICmd_RESERVE_10 = 0x56, /* SPC: Mandatory */␊
399 kSCSICmd_REZERO_UNIT = 0x01, /* Obsolete */␊
400 kSCSICmd_SEARCH_DATA_EQUAL_10 = 0x31, /* Obsolete */␊
401 kSCSICmd_SEARCH_DATA_HIGH_10 = 0x30, /* Obsolete */␊
402 kSCSICmd_SEARCH_DATA_LOW_10 = 0x32, /* Obsolete */␊
403 kSCSICmd_SEEK_6 = 0x0B, /* Obsolete */␊
404 kSCSICmd_SEEK_10 = 0x2B, /* Sec. 6.1.12: Optional */␊
405 kSCSICmd_SEND_DIAGNOSTICS = 0x1D, /* SPC: Mandatory */␊
406 kSCSICmd_SET_LIMITS_10 = 0x33, /* Sec. 6.1.13: Optional */␊
407 kSCSICmd_SET_LIMITS_12 = 0xB3, /* Sec. 6.2.8: Optional */␊
408 kSCSICmd_START_STOP_UNIT = 0x1B, /* Sec. 6.1.14: Optional */␊
409 kSCSICmd_SYNCHRONIZE_CACHE = 0x35, /* Sec. 6.1.15: Optional */␊
410 kSCSICmd_TEST_UNIT_READY = 0x00, /* SPC: Mandatory */␊
411␉kSCSICmd_UPDATE_BLOCK␉␉␉␉␉= 0x3D,␉/* Sec. 6.2.9: Optional */␊
412 kSCSICmd_VERIFY_10 = 0x2F, /* Sec. 6.1.16: Optional */␊
413 kSCSICmd_WRITE_6 = 0x0A, /* Sec. 6.1.17: Optional */␊
414 kSCSICmd_WRITE_10 = 0x2A, /* Sec. 6.1.18: Optional */␊
415 kSCSICmd_WRITE_12 = 0xAA, /* Sec. 6.2.13: Optional */␊
416 kSCSICmd_WRITE_AND_VERIFY_10 = 0x2E, /* Sec. 6.1.19: Optional */␊
417 kSCSICmd_WRITE_AND_VERIFY_12 = 0xAE, /* Sec. 6.2.15: Optional */␊
418 kSCSICmd_WRITE_BUFFER = 0x3B, /* SPC: Optional */␊
419 kSCSICmd_WRITE_LONG = 0x3F, /* Sec. 6.1.20: Optional */␊
420 kSCSICmd_WRITE_SAME = 0x41, /* Sec. 6.1.21: Optional */␊
421 kSCSICmd_XDREAD = 0x52, /* Sec. 6.1.22: Optional */␊
422 kSCSICmd_XDWRITE = 0x50, /* Sec. 6.1.23: Optional */␊
423 kSCSICmd_XDWRITE_EXTENDED = 0x80, /* Sec. 6.1.24: Optional */␊
424 kSCSICmd_XPWRITE = 0x51 /* Sec. 6.1.25: Optional */␊
425};␊
426#endif␊
427␊
428#pragma mark -␊
429#pragma mark 0x01 SSC Sequential Access Commands␊
430/* Commands defined by the T10:997-D SCSI-3 Stream Commands (SSC) command␊
431 * specification. The definitions and section numbers are based on section 5␊
432 * of the revision 22, January 1, 2000 version of the specification. ␊
433 */␊
434#if 0␊
435enum␊
436{␊
437 kSCSICmd_CHANGE_DEFINITION = 0x40, /* Obsolete */␊
438 kSCSICmd_COMPARE = 0x39, /* SPC: Optional */␊
439 kSCSICmd_COPY = 0x18, /* SPC: Optional */␊
440 kSCSICmd_COPY_AND_VERIFY = 0x3A, /* SPC: Optional */␊
441 kSCSICmd_ERASE = 0x19, /* Sec. 5.3.1: Mandatory */␊
442 kSCSICmd_FORMAT_MEDIUM = 0x04, /* Sec. 5.3.2: Optional */␊
443 kSCSICmd_INQUIRY = 0x12, /* SPC: Mandatory */␊
444 kSCSICmd_LOAD_UNLOAD = 0x1B, /* Sec. 5.3.3: Optional */␊
445 kSCSICmd_LOCATE = 0x2B, /* Sec. 5.3.4: Optional */␊
446 kSCSICmd_LOG_SELECT = 0x4C, /* SPC: Optional */␊
447 kSCSICmd_LOG_SENSE = 0x4D, /* SPC: Optional */␊
448 kSCSICmd_MODE_SELECT_6 = 0x15, /* SPC: Mandatory */␊
449 kSCSICmd_MODE_SELECT_10 = 0x55, /* SPC: Optional */␊
450 kSCSICmd_MODE_SENSE_6 = 0x1A, /* SPC: Mandatory */␊
451 kSCSICmd_MODE_SENSE_10 = 0x5A, /* SPC: Optional */␊
452 kSCSICmd_MOVE_MEDIUM = 0xA5, /* SMC: Optional */␊
453 kSCSICmd_MOVE_MEDIUM_ATTACHED = 0xA7, /* SMC: Optional */␊
454 kSCSICmd_PERSISTENT_RESERVE_IN = 0x5E, /* SPC: Optional */␊
455 kSCSICmd_PERSISTENT_RESERVE_OUT = 0x5F, /* SPC: Optional */␊
456 kSCSICmd_PREVENT_ALLOW_MEDIUM_REMOVAL = 0x1E, /* SPC: Optional */␊
457 kSCSICmd_READ_6 = 0x08, /* Sec. 5.3.5: Mandatory */␊
458 kSCSICmd_READ_BLOCK_LIMITS = 0x05, /* Sec. 5.3.6: Mandatory */␊
459 kSCSICmd_READ_BUFFER = 0x3C, /* SPC: Optional */␊
460 kSCSICmd_READ_ELEMENT_STATUS = 0xB8, /* SMC: Optional */␊
461 kSCSICmd_READ_ELEMENT_STATUS_ATTACHED = 0xB4, /* SMC: Optional */␊
462 kSCSICmd_READ_POSITION = 0x34, /* Sec. 5.3.7: Mandatory */␊
463 kSCSICmd_READ_REVERSE = 0x0F, /* Sec. 5.3.8: Optional */␊
464 kSCSICmd_RECEIVE_DIAGNOSTICS_RESULTS = 0x1C, /* SPC: Optional */␊
465 kSCSICmd_RECOVER_BUFFERED_DATA = 0x14, /* Sec. 5.3.9: Optional */␊
466 kSCSICmd_RELEASE_6 = 0x17, /* SPC: Mandatory */␊
467 kSCSICmd_RELEASE_10 = 0x57, /* SPC: Mandatory */␊
468 kSCSICmd_REPORT_DENSITY_SUPPORT = 0x44, /* Sec. 5.3.10: Mandatory*/␊
469 kSCSICmd_REPORT_LUNS = 0xA0, /* SPC: Mandatory */␊
470 kSCSICmd_REQUEST_SENSE = 0x03, /* SPC: Mandatory */␊
471 kSCSICmd_RESERVE_6 = 0x16, /* SPC: Mandatory */␊
472 kSCSICmd_RESERVE_10 = 0x56, /* SPC: Mandatory */␊
473 kSCSICmd_REWIND = 0x01, /* Sec. 5.3.11: Mandatory*/␊
474 kSCSICmd_SEND_DIAGNOSTICS = 0x1D, /* SPC: Mandatory */␊
475 kSCSICmd_SPACE = 0x11, /* Sec. 5.3.12: Mandatory*/␊
476 kSCSICmd_TEST_UNIT_READY = 0x00, /* SPC: Mandatory */␊
477 kSCSICmd_VERIFY_6 = 0x13, /* Sec. 5.3.13: Optional */␊
478 kSCSICmd_WRITE_6 = 0x0A, /* Sec. 5.3.14: Mandatory*/␊
479 kSCSICmd_WRITE_BUFFER = 0x3B, /* SPC: Optional */␊
480 kSCSICmd_WRITE_FILEMARKS = 0x10 /* Sec. 5.3.15: Mandatory*/␊
481};␊
482#endif␊
483␊
484#pragma mark -␊
485#pragma mark 0x02 SSC Printer Commands␊
486/* Commands defined by the T10:997-D SCSI-3 Stream Commands (SSC) command␊
487 * specification. The definitions and section numbers are based on section 6␊
488 * of the revision 22, January 1, 2000 version of the specification. ␊
489 */␊
490#if 0␊
491enum ␊
492{␊
493 kSCSICmd_CHANGE_DEFINITION = 0x40, /* Obsolete */␊
494 kSCSICmd_COMPARE = 0x39, /* SPC: Optional */␊
495 kSCSICmd_COPY = 0x18, /* SPC: Optional */␊
496 kSCSICmd_COPY_AND_VERIFY = 0x3A, /* SPC: Optional */␊
497 kSCSICmd_FORMAT = 0x04, /* Sec. 6.2.1: Optional */␊
498 kSCSICmd_INQUIRY = 0x12, /* SPC: Mandatory */␊
499 kSCSICmd_LOG_SELECT = 0x4C, /* SPC: Optional */␊
500 kSCSICmd_LOG_SENSE = 0x4D, /* SPC: Optional */␊
501 kSCSICmd_MODE_SELECT_6 = 0x15, /* SPC: Mandatory */␊
502 kSCSICmd_MODE_SELECT_10 = 0x55, /* SPC: Optional */␊
503 kSCSICmd_MODE_SENSE_6 = 0x1A, /* SPC: Mandatory */␊
504 kSCSICmd_MODE_SENSE_10 = 0x5A, /* SPC: Optional */␊
505 kSCSICmd_PERSISTENT_RESERVE_IN = 0x5E, /* SPC: Optional */␊
506 kSCSICmd_PERSISTENT_RESERVE_OUT = 0x5F, /* SPC: Optional */␊
507 kSCSICmd_PRINT = 0x0A, /* Sec. 6.2.2: Mandatory */␊
508 kSCSICmd_READ_BUFFER = 0x3C, /* SPC: Optional */␊
509 kSCSICmd_RECEIVE_DIAGNOSTICS_RESULTS = 0x1C, /* SPC: Optional */␊
510 kSCSICmd_RECOVER_BUFFERED_DATA = 0x14, /* Sec. 6.2.3: Optional */␊
511 kSCSICmd_RELEASE_6 = 0x17, /* SPC: Mandatory */␊
512 kSCSICmd_RELEASE_10 = 0x57, /* SPC: Mandatory */␊
513 kSCSICmd_REPORT_LUNS = 0xA0, /* SPC: Mandatory */␊
514 kSCSICmd_REQUEST_SENSE = 0x03, /* SPC: Mandatory */␊
515 kSCSICmd_RESERVE_6 = 0x16, /* SPC: Mandatory */␊
516 kSCSICmd_RESERVE_10 = 0x56, /* SPC: Mandatory */␊
517 kSCSICmd_SEND_DIAGNOSTICS = 0x1D, /* SPC: Mandatory */␊
518 kSCSICmd_SLEW_AND_PRINT = 0x0B, /* Sec. 6.2.4: Optional */␊
519 kSCSICmd_STOP_PRINT = 0x1B, /* Sec. 6.2.5: Optional */␊
520 kSCSICmd_SYNCHRONIZE_BUFFER = 0x10, /* Sec. 6.2.6: Optional */␊
521 kSCSICmd_TEST_UNIT_READY = 0x00, /* SPC: Mandatory */␊
522 kSCSICmd_WRITE_BUFFER = 0x3B /* SPC: Optional */␊
523};␊
524#endif␊
525 ␊
526#pragma mark -␊
527#pragma mark 0x03 SPC Processor Commands␊
528/* Commands defined by the T10:1236-D SCSI Primary Commands-2 (SPC-2) ␊
529 * command specification. The definitions and section numbers are based on␊
530 * section 9 of the revision 18, 21 May 2000 version of the specification.␊
531 */␊
532#if 0␊
533enum ␊
534{␊
535 kSCSICmd_CHANGE_DEFINITION = 0x40, /* Obsolete */␊
536 kSCSICmd_COMPARE = 0x39, /* Sec. 7.2: Optional */␊
537 kSCSICmd_COPY = 0x18, /* Sec. 7.3: Optional */␊
538 kSCSICmd_COPY_AND_VERIFY = 0x3A, /* Sec. 7.4: Optional */␊
539 kSCSICmd_EXTENDED_COPY = 0x83, /* Sec. 7.5: Optional */␊
540 kSCSICmd_INQUIRY = 0x12, /* Sec. 7.6: Mandatory */␊
541 kSCSICmd_LOG_SELECT = 0x4C, /* Sec. 7.7: Optional */␊
542 kSCSICmd_LOG_SENSE = 0x4D, /* Sec. 7.8: Optional */␊
543 kSCSICmd_PERSISTENT_RESERVE_IN = 0x5E, /* Sec. 7.13: Optional */␊
544 kSCSICmd_PERSISTENT_RESERVE_OUT = 0x5F, /* Sec. 7.14: Optional */␊
545 kSCSICmd_READ_BUFFER = 0x3C, /* Sec. 7.16: Optional */␊
546 kSCSICmd_RECEIVE = 0x08, /* Sec. 9.2: Optional */␊
547 kSCSICmd_RECEIVE_COPY_RESULTS = 0x84, /* Sec. 7.17: Optional */␊
548 kSCSICmd_RECEIVE_DIAGNOSTICS_RESULTS = 0x1C, /* Sec. 7.18: Optional */␊
549 kSCSICmd_RELEASE_10 = 0x57, /* Sec. 7.19: Optional */␊
550 kSCSICmd_RELEASE_6 = 0x17, /* Sec. 7.20: Optional */␊
551 kSCSICmd_REPORT_LUNS = 0xA0, /* Sec. 7.22: Optional */␊
552 kSCSICmd_REQUEST_SENSE = 0x03, /* Sec. 7.23: Mandatory */␊
553 kSCSICmd_RESERVE_10 = 0x56, /* Sec. 7.24: Optional */␊
554 kSCSICmd_RESERVE_6 = 0x16, /* Sec. 7.25: Optional */␊
555 kSCSICmd_SEND = 0x0A, /* Sec. 9.3: Optional */␊
556 kSCSICmd_SEND_DIAGNOSTICS = 0x1D, /* Sec. 7.26: Mandatory */␊
557 kSCSICmd_TEST_UNIT_READY = 0x00, /* Sec. 7.27: Mandatory */␊
558 kSCSICmd_WRITE_BUFFER = 0x3B /* Sec. 7.29: Optional */␊
559};␊
560#endif␊
561␊
562#pragma mark -␊
563#pragma mark 0x04 SBC Write Once Commands␊
564/* Commands defined by the T10:990-D SCSI-3 Block Commands (SBC) command␊
565 * specification. The definitions and section numbers are based on section 6.3␊
566 * of the revision 8c, 13 November 1997 version of the specification. ␊
567 */␊
568#if 0␊
569enum␊
570{␊
571 kSCSICmd_CHANGE_DEFINITION = 0x40, /* SPC: Optional */␊
572 kSCSICmd_COMPARE = 0x39, /* SPC: Optional */␊
573 kSCSICmd_COPY = 0x18, /* SPC: Optional */␊
574 kSCSICmd_COPY_AND_VERIFY = 0x3A, /* SPC: Optional*/␊
575 kSCSICmd_INQUIRY = 0x12, /* SPC: Mandatory */␊
576 kSCSICmd_LOCK_UNLOCK_CACHE = 0x36, /* Sec. 6.1.2: Optional */␊
577 kSCSICmd_LOG_SELECT = 0x4C, /* SPC: Optional */␊
578 kSCSICmd_LOG_SENSE = 0x4D, /* SPC: Optional */␊
579 kSCSICmd_MEDIUM_SCAN = 0x38, /* Sec. 6.2.3: Optional */␊
580 kSCSICmd_MODE_SELECT_6 = 0x15, /* SPC: Optional */␊
581 kSCSICmd_MODE_SELECT_10 = 0x55, /* SPC: Optional */␊
582 kSCSICmd_MODE_SENSE_6 = 0x1A, /* SPC: Optional */␊
583 kSCSICmd_MODE_SENSE_10 = 0x5A, /* SPC: Optional */␊
584 kSCSICmd_MOVE_MEDIUM = 0xA5, /* SMC: Optional */␊
585 kSCSICmd_PERSISTENT_RESERVE_IN = 0x5E, /* SPC: Optional */␊
586 kSCSICmd_PERSISTENT_RESERVE_OUT = 0x5F, /* SPC: Optional */␊
587 kSCSICmd_PREFETCH = 0x34, /* Sec. 6.1.3: Optional */␊
588 kSCSICmd_PREVENT_ALLOW_MEDIUM_REMOVAL = 0x1E, /* SPC: Optional */␊
589 kSCSICmd_READ_6 = 0x08, /* Sec. 6.1.4: Optional */␊
590 kSCSICmd_READ_10 = 0x28, /* Sec. 6.1.5: Mandatory */␊
591 kSCSICmd_READ_12 = 0xA8, /* Sec. 6.2.4: Optional */␊
592 kSCSICmd_READ_BUFFER = 0x3C, /* SPC: Optional */␊
593 kSCSICmd_READ_CAPACITY = 0x25, /* Sec. 6.1.6: Mandatory */␊
594 kSCSICmd_READ_ELEMENT_STATUS = 0xB8, /* SMC: Optional */␊
595 kSCSICmd_READ_LONG = 0x3E, /* Sec. 6.1.8: Optional */␊
596 kSCSICmd_REASSIGN_BLOCKS = 0x07, /* Sec. 6.1.9: Optional */␊
597 kSCSICmd_RECEIVE_DIAGNOSTICS_RESULTS = 0x1C, /* SPC: Optional */␊
598 kSCSICmd_RELEASE_6 = 0x17, /* SPC: Optional */␊
599 kSCSICmd_RELEASE_10 = 0x57, /* SPC: Mandatory */␊
600 kSCSICmd_REQUEST_SENSE = 0x03, /* SPC: Mandatory */␊
601 kSCSICmd_RESERVE_6 = 0x16, /* SPC: Optional */␊
602 kSCSICmd_RESERVE_10 = 0x56, /* SPC: Mandatory */␊
603 kSCSICmd_REZERO_UNIT = 0x01, /* Obsolete */␊
604 kSCSICmd_SEARCH_DATA_EQUAL_10 = 0x31, /* Obsolete */␊
605 kSCSICmd_SEARCH_DATA_EQUAL_12 = 0xB1, /* Obsolete */␊
606 kSCSICmd_SEARCH_DATA_HIGH_10 = 0x30, /* Obsolete */␊
607 kSCSICmd_SEARCH_DATA_HIGH_12 = 0xB0, /* Obsolete */␊
608 kSCSICmd_SEARCH_DATA_LOW_10 = 0x32, /* Obsolete */␊
609 kSCSICmd_SEARCH_DATA_LOW_12 = 0xB2, /* Obsolete */␊
610 kSCSICmd_SEEK_6 = 0x0B, /* Obsolete */␊
611 kSCSICmd_SEEK_10 = 0x2B, /* Sec. 6.1.12: Optional */␊
612 kSCSICmd_SEND_DIAGNOSTICS = 0x1D, /* SPC: Mandatory */␊
613 kSCSICmd_SET_LIMITS_10 = 0x33, /* Sec. 6.1.13: Optional */␊
614 kSCSICmd_SET_LIMITS_12 = 0xB3, /* Sec. 6.2.8: Optional */␊
615 kSCSICmd_START_STOP_UNIT = 0x1B, /* Sec. 6.1.14: Optional */␊
616 kSCSICmd_SYNCHRONIZE_CACHE = 0x35, /* Sec. 6.1.15: Optional */␊
617 kSCSICmd_TEST_UNIT_READY = 0x00, /* SPC: Mandatory */␊
618 kSCSICmd_VERIFY_10 = 0x2F, /* Sec. 6.2.10: Optional */␊
619 kSCSICmd_VERIFY_12 = 0xAF, /* Sec. 6.2.11: Optional */␊
620 kSCSICmd_WRITE_6 = 0x0A, /* Sec. 6.1.17: Optional */␊
621 kSCSICmd_WRITE_10 = 0x2A, /* Sec. 6.2.10: Mandatory*/␊
622 kSCSICmd_WRITE_12 = 0xAA, /* Sec. 6.2.13: Optional */␊
623 kSCSICmd_WRITE_AND_VERIFY_10 = 0x2E, /* Sec. 6.2.14: Optional */␊
624 kSCSICmd_WRITE_AND_VERIFY_12 = 0xAE, /* Sec. 6.2.15: Optional */␊
625 kSCSICmd_WRITE_BUFFER = 0x3B, /* SPC: Optional */␊
626 kSCSICmd_WRITE_LONG = 0x3F /* Sec. 6.1.20: Optional */␊
627};␊
628#endif␊
629␊
630#pragma mark -␊
631#pragma mark 0x05 MMC CD-ROM Commands␊
632/* Commands defined by the T10:1363-D SCSI Multimedia Commands-3 (MMC-3) ␊
633 * specification. The definitions and section numbers are based on section 6.1␊
634 * of the revision 01, March 03, 2000 version of the specification. ␊
635 *␊
636 * NOTE: The comments following each command may not be accurate. These are␊
637 * not from the MMC-3 specification, but have been derived from the SCSI-2 and␊
638 * original MMC specifications. Unlike the other SCSI command specifications,␊
639 * MMC-2 and MMC-3 do not provide a command requirement type and therefore does␊
640 * not relist the SPC commands with these requirements as they apply to MMC␊
641 * devices. The MMC-2 and MMC-3 specifications also refer back to the SBC␊
642 * specification which seems invalid since MMC devices do not represent a␊
643 * Peripheral Device Type defined by SBC. It is assumed that the SBC␊
644 * references refer to the Peripheral Device Type 0x00 - Direct Access Commands␊
645 * definitions from that specification.␊
646 */␊
647#if 0␊
648enum ␊
649{␊
650 kSCSICmd_BLANK = 0xA1, /* Sec. 6.1.1: */␊
651 kSCSICmd_CHANGE_DEFINITION = 0x40, /* Obsolete */␊
652 kSCSICmd_CLOSE_TRACK_SESSION = 0x5B, /* Sec. 6.1.2: */␊
653 kSCSICmd_COMPARE = 0x39, /* SPC: Optional */␊
654 kSCSICmd_COPY = 0x18, /* SPC: Optional */␊
655 kSCSICmd_COPY_AND_VERIFY = 0x3A, /* SPC: Optional */␊
656 kSCSICmd_ERASE = 0x2C, /* SBC: */␊
657 kSCSICmd_FORMAT_UNIT = 0x04, /* Sec. 6.1.3: */␊
658 kSCSICmd_GET_CONFIGURATION = 0x46, /* Sec. 6.1.4: */␊
659 kSCSICmd_GET_EVENT_STATUS_NOTIFICATION = 0x4A, /* Sec. 6.1.5: */␊
660 kSCSICmd_GET_PERFORMANCE = 0xAC, /* Sec. 6.1.6: */␊
661 kSCSICmd_INQUIRY = 0x12, /* SPC: Mandatory */␊
662 kSCSICmd_LOAD_UNLOAD_MEDIUM = 0xA6, /* Sec. 6.1.7: */␊
663 kSCSICmd_LOG_SELECT = 0x4C, /* SPC: Optional */␊
664 kSCSICmd_LOG_SENSE = 0x4D, /* SPC: Optional */␊
665 kSCSICmd_MECHANISM_STATUS = 0xBD, /* Sec. 6.1.8: */␊
666 kSCSICmd_MODE_SELECT_6 = 0x15, /* SPC: Mandatory */␊
667 kSCSICmd_MODE_SELECT_10 = 0x55, /* SPC: Mandatory */␊
668 kSCSICmd_MODE_SENSE_6 = 0x1A, /* SPC: Mandatory */␊
669 kSCSICmd_MODE_SENSE_10 = 0x5A, /* SPC: Mandatory */␊
670 kSCSICmd_PAUSE_RESUME = 0x4B, /* Sec. 6.1.9: */␊
671 kSCSICmd_PLAY_AUDIO_10 = 0x45, /* Sec. 6.1.10: */␊
672 kSCSICmd_PLAY_AUDIO_12 = 0xA5, /* Sec. 6.1.11: */␊
673 kSCSICmd_PLAY_AUDIO_MSF = 0x47, /* Sec. 6.1.12: */␊
674 kSCSICmd_PLAY_AUDIO_TRACK_INDEX = 0x48, /* Obsolete */␊
675 kSCSICmd_PLAY_CD = 0xBC, /* Sec. 6.1.13: */␊
676 kSCSICmd_PLAY_RELATIVE_10 = 0x49, /* Obsolete */␊
677 kSCSICmd_PLAY_RELATIVE_12 = 0xA9, /* Obsolete */␊
678 kSCSICmd_PREFETCH = 0x34, /* Optional */␊
679 kSCSICmd_PREVENT_ALLOW_MEDIUM_REMOVAL = 0x1E, /* Optional */␊
680 kSCSICmd_READ_6 = 0x08, /* Optional */␊
681 kSCSICmd_READ_10 = 0x28, /* Mandatory */␊
682 kSCSICmd_READ_12 = 0xA8, /* Optional */␊
683 kSCSICmd_READ_BUFFER = 0x3C, /* Optional */␊
684 kSCSICmd_READ_BUFFER_CAPACITY = 0x5C, /* Sec. 6.1.15: */␊
685 kSCSICmd_READ_CD = 0xBE, /* Sec. 6.1.16: */␊
686 kSCSICmd_READ_CD_MSF = 0xB9, /* Sec. 6.1.17: */␊
687 kSCSICmd_READ_CAPACITY = 0x25, /* Sec. 6.1.18: */␊
688 kSCSICmd_READ_DISC_INFORMATION = 0x51, /* Sec. 6.1.19: */␊
689 kSCSICmd_READ_DVD_STRUCTURE = 0xAD, /* Sec. 6.1.20: */␊
690 kSCSICmd_READ_DISC_STRUCTURE = 0xAD, /* Sec. 6.1.20: */␊
691 kSCSICmd_READ_FORMAT_CAPACITIES = 0x23, /* Sec. 6.1.21: */␊
692 kSCSICmd_READ_HEADER = 0x44, /* Sec. 6.1.22: */␊
693 kSCSICmd_READ_LONG = 0x3E, /* Optional */␊
694 kSCSICmd_READ_MASTER_CUE = 0x59, /* Sec. 6.1.23: */␊
695 kSCSICmd_READ_SUB_CHANNEL = 0x42, /* Sec. 6.1.24: */␊
696 kSCSICmd_READ_TOC_PMA_ATIP = 0x43, /* Sec. 6.1.25: */␊
697 kSCSICmd_READ_TRACK_INFORMATION = 0x52, /* Sec. 6.1.27: */␊
698 kSCSICmd_RECEIVE_DIAGNOSTICS_RESULTS = 0x1C, /* Optional */␊
699 kSCSICmd_RELEASE_6 = 0x17, /* Mandatory */␊
700 kSCSICmd_RELEASE_10 = 0x57, /* Optional */␊
701 kSCSICmd_REPAIR_TRACK = 0x58, /* Sec. 6.1.28: */␊
702 kSCSICmd_REPORT_KEY = 0xA4, /* Sec. 6.1.29: */␊
703 kSCSICmd_REQUEST_SENSE = 0x03, /* Mandatory */␊
704 kSCSICmd_RESERVE_6 = 0x16, /* Mandatory */␊
705 kSCSICmd_RESERVE_10 = 0x56, /* Optional */␊
706 kSCSICmd_RESERVE_TRACK = 0x53, /* Sec. 6.1.30: */␊
707 kSCSICmd_SCAN_MMC = 0xBA, /* Sec. 6.1.31: */␊
708 kSCSICmd_SEARCH_DATA_EQUAL_10 = 0x31, /* Obsolete */␊
709 kSCSICmd_SEARCH_DATA_EQUAL_12 = 0xB1, /* Obsolete */␊
710 kSCSICmd_SEARCH_DATA_HIGH_10 = 0x30, /* Obsolete */␊
711 kSCSICmd_SEARCH_DATA_HIGH_12 = 0xB0, /* Obsolete */␊
712 kSCSICmd_SEARCH_DATA_LOW_10 = 0x32, /* Obsolete */␊
713 kSCSICmd_SEARCH_DATA_LOW_12 = 0xB2, /* Obsolete */␊
714 kSCSICmd_SEEK_6 = 0x0B, /* Obsolete */␊
715 kSCSICmd_SEEK_10 = 0x2B, /* SBC: */␊
716 kSCSICmd_SEND_CUE_SHEET = 0x5D, /* Sec. 6.1.32: */␊
717 kSCSICmd_SEND_DIAGNOSTICS = 0x1D, /* Mandatory */␊
718 kSCSICmd_SEND_DVD_STRUCTURE = 0xBF, /* Sec. 6.1.33: */␊
719 kSCSICmd_SEND_EVENT = 0xA2, /* Sec. 6.1.34: */␊
720 kSCSICmd_SEND_KEY = 0xA3, /* Sec. 6.1.35: */␊
721 kSCSICmd_SEND_OPC_INFORMATION = 0x54, /* Sec. 6.1.36: */␊
722 kSCSICmd_SET_CD_SPEED = 0xBB, /* Sec. 6.1.37: */␊
723 kSCSICmd_SET_LIMITS_10 = 0x33, /* Optional */␊
724 kSCSICmd_SET_LIMITS_12 = 0xB3, /* Optional */␊
725 kSCSICmd_SET_READ_AHEAD = 0xA7, /* Sec. 6.1.38: */␊
726 kSCSICmd_SET_STREAMING = 0xB6, /* Sec. 6.1.39: */␊
727 kSCSICmd_START_STOP_UNIT = 0x1B, /* Optional */␊
728 kSCSICmd_STOP_PLAY_SCAN = 0x4E, /* Sec. 6.1.40: */␊
729 kSCSICmd_SYNCHRONIZE_CACHE = 0x35, /* Sec. 6.1.41: */␊
730 kSCSICmd_TEST_UNIT_READY = 0x00, /* Mandatory */␊
731 kSCSICmd_VERIFY_10 = 0x2F, /* Optional */␊
732 kSCSICmd_VERIFY_12 = 0xAF, /* Optional */␊
733 kSCSICmd_WRITE_10 = 0x2A, /* Sec. 6.1.42: */␊
734 kSCSICmd_WRITE_12 = 0xAA, /* Sec. 6.1.43: */␊
735 kSCSICmd_WRITE_AND_VERIFY_10 = 0x2E, /* Sec. 6.1.44: */␊
736 kSCSICmd_WRITE_BUFFER = 0x3B /* Optional */␊
737};␊
738#endif␊
739␊
740#pragma mark -␊
741#pragma mark 0x06 SGC Scanner Commands␊
742/* Commands defined by the T10:998-D SCSI-3 Graphics Commands (SGC)␊
743 * specification. The definitions and section numbers are based on section 6␊
744 * of the revision 0, April 1995 version of the specification. ␊
745 */␊
746#if 0␊
747enum ␊
748{␊
749 kSCSICmd_CHANGE_DEFINITION = 0x40, /* SPC: Optional */␊
750 kSCSICmd_COMPARE = 0x39, /* SPC: Optional */␊
751 kSCSICmd_COPY = 0x18, /* SPC: Optional */␊
752 kSCSICmd_COPY_AND_VERIFY = 0x3A, /* SPC: Optional */␊
753 kSCSICmd_GET_DATA_BUFFER_STATUS = 0x34, /* Sec. 6.1.1: Optional */␊
754 kSCSICmd_GET_WINDOW = 0x25, /* Sec. 6.1.2: Optional */␊
755 kSCSICmd_INQUIRY = 0x12, /* SPC: Mandatory */␊
756 kSCSICmd_LOG_SELECT = 0x4C, /* SPC: Optional */␊
757 kSCSICmd_LOG_SENSE = 0x4D, /* SPC: Optional */␊
758 kSCSICmd_MODE_SELECT_6 = 0x15, /* SPC: Optional */␊
759 kSCSICmd_MODE_SELECT_10 = 0x55, /* SPC: Optional */␊
760 kSCSICmd_MODE_SENSE_6 = 0x1A, /* SPC: Optional */␊
761 kSCSICmd_MODE_SENSE_10 = 0x5A, /* SPC: Optional */␊
762 kSCSICmd_OBJECT_POSITION = 0x31, /* Sec. 6.1.3: Optional */␊
763 kSCSICmd_PORT_STATUS = 0x11, /* SPC (??): Mandatory␊
764 * for dual port devices */␊
765 kSCSICmd_READ = 0x28, /* Sec. 6.1.4: Mandatory */␊
766 kSCSICmd_READ_BUFFER = 0x3C, /* SPC: Optional */␊
767 kSCSICmd_RECEIVE_DIAGNOSTICS_RESULTS = 0x1C, /* SPC: Optional */␊
768 kSCSICmd_RELEASE_6 = 0x17, /* SPC: Mandatory */␊
769 kSCSICmd_REQUEST_SENSE = 0x03, /* SPC: Mandatory */␊
770 kSCSICmd_RESERVE_6 = 0x16, /* SPC: Mandatory */␊
771 kSCSICmd_SCAN = 0x1B, /* Sec. 6.1.5: Optional */␊
772 kSCSICmd_SEND = 0x1B, /* Sec. 6.1.6: Optional */␊
773 kSCSICmd_SEND_DIAGNOSTICS = 0x1D, /* SPC: Mandatory */␊
774 kSCSICmd_SET_WINDOW = 0x24, /* Sec. 6.1.7: Mandatory */␊
775 kSCSICmd_TEST_UNIT_READY = 0x00, /* SPC: Mandatory */␊
776 kSCSICmd_WRITE_BUFFER = 0x3B /* SPC: Optional */␊
777};␊
778#endif␊
779␊
780#pragma mark -␊
781#pragma mark 0x07 SBC Optical Media Commands␊
782/* Commands defined by the T10:990-D SCSI-3 Block Commands (SBC) ␊
783 * (revision 8c, 13 November 1998) command specification. ␊
784 */␊
785␊
786#pragma mark -␊
787#pragma mark 0x08 SMC Medium Changer Commands␊
788/* Commands defined by the T10:1228-D SCSI-3 Medium Changer Commands-2 (SMC-2)␊
789 * (revision 0, March 16, 2000) command specification. ␊
790 */␊
791#if 0␊
792enum␊
793{␊
794 /* Commands For Independent Medium Changers */␊
795 kSCSICmd_EXCHANGE_MEDIUM = 0xA6, /* Optional */␊
796 kSCSICmd_INITIALIZE_ELEMENT_STATUS = 0x07, /* Optional */␊
797 kSCSICmd_MODE_SELECT_6 = 0x15, /* Optional */␊
798 kSCSICmd_MODE_SELECT_10 = 0x55, /* Optional */␊
799 kSCSICmd_MODE_SENSE_6 = 0x1A, /* Optional */␊
800 kSCSICmd_MODE_SENSE_10 = 0x5A, /* Optional */␊
801 kSCSICmd_MOVE_MEDIUM = 0xA5, /* Mandatory */␊
802 kSCSICmd_PERSISTENT_RESERVE_IN = 0x5E, /* Optional */␊
803 kSCSICmd_PERSISTENT_RESERVE_OUT = 0x5F, /* Optional */␊
804 kSCSICmd_POSITION_TO_ELEMENT = 0x2B, /* Optional */␊
805 kSCSICmd_READ_ELEMENT_STATUS = 0xB8, /* Mandatory */␊
806 kSCSICmd_RELEASE_ELEMENT_6 = 0x16, /* Optional */␊
807 kSCSICmd_RELEASE_ELEMENT_10 = 0x56, /* Optional */␊
808 kSCSICmd_REQUEST_VOLUME_ELEMENT_ADDRESS = 0xB5, /* Optional */␊
809 kSCSICmd_REQUEST_SENSE = 0x03, /* Mandatory */␊
810 kSCSICmd_RESERVE_ELEMENT_6 = 0x16, /* Optional */␊
811 kSCSICmd_RESERVE_ELEMENT_10 = 0x56 /* Optional */␊
812};␊
813#endif␊
814␊
815#pragma mark -␊
816#pragma mark 0x09 SSC Communications Commands␊
817/* Commands defined by the T10:997-D SCSI-3 Stream Commands (SSC) ␊
818 * (revision 22, January 1, 2000) command specification. ␊
819 */␊
820 ␊
821#pragma mark -␊
822#pragma mark 0x0A ASC IT8 Prepress Commands␊
823#pragma mark 0x0B ASC IT8 Prepress Commands␊
824/* Commands defined by the ASC IT8 <title goes here> specification␊
825 * (revision xx, month day, year) command specification. ␊
826 */␊
827#if 0␊
828enum␊
829{␊
830};␊
831#endif␊
832␊
833#pragma mark -␊
834#pragma mark 0x0C SCC Array Controller Commands␊
835/* Commands defined by the ANSI NCITS.318-199x SCSI Controller␊
836 * Commands (SCC-2) ratified command specification. ␊
837 */␊
838#if 0␊
839enum␊
840{␊
841 kSCSICmd_MAINTENANCE_IN = 0xA3, /* Mandatory */␊
842 kSCSICmd_MAINTENANCE_OUT = 0xA4, /* Optional */␊
843 kSCSICmd_MODE_SELECT_6 = 0x15, /* Optional */␊
844 kSCSICmd_MODE_SELECT_10 = 0x55, /* Optional */␊
845 kSCSICmd_MODE_SENSE_6 = 0x1A, /* Optional */␊
846 kSCSICmd_MODE_SENSE_10 = 0x5A, /* Optional */␊
847 kSCSICmd_PERSISTENT_RESERVE_IN = 0x5E, /* Optional */␊
848 kSCSICmd_PERSISTENT_RESERVE_OUT = 0x5F, /* Optional */␊
849 kSCSICmd_PORT_STATUS = 0x1F, /* Optional */␊
850 kSCSICmd_REDUNDANCY_GROUP_IN = 0xBA, /* Mandatory */␊
851 kSCSICmd_REDUNDANCY_GROUP_OUT = 0xBB, /* Optional */␊
852 kSCSICmd_RELEASE_6 = 0x17, /* Optional */␊
853 kSCSICmd_RELEASE_10 = 0x57, /* Optional */␊
854 kSCSICmd_REPORT_LUNS = 0xA0, /* Mandatory */␊
855 kSCSICmd_REQUEST_SENSE = 0x03, /* Mandatory */␊
856 kSCSICmd_RESERVE_6 = 0x16, /* Optional */␊
857 kSCSICmd_RESERVE_10 = 0x56, /* Optional*/␊
858 kSCSICmd_SEND_DIAGNOSTICS = 0x1D, /* Optional */␊
859 kSCSICmd_SPARE_IN = 0xBC, /* Mandatory */␊
860 kSCSICmd_SPARE_OUT = 0xBD /* Optional */␊
861};␊
862#endif␊
863␊
864#pragma mark -␊
865#pragma mark 0x0D SES Enclosure Services Commands␊
866/* Commands defined by the T10:1212-D SCSI-3 Enclosure Services (SES) ␊
867 * (revision 8b, February 11, 1998) command specification. ␊
868 */␊
869#if 0␊
870enum␊
871{␊
872 kSCSICmd_MODE_SELECT_6 = 0x15, /* Optional */␊
873 kSCSICmd_MODE_SELECT_10 = 0x55, /* Optional */␊
874 kSCSICmd_MODE_SENSE_6 = 0x1A, /* Optional */␊
875 kSCSICmd_MODE_SENSE_10 = 0x5A, /* Optional */␊
876 kSCSICmd_PERSISTENT_RESERVE_IN = 0x5E, /* Optional */␊
877 kSCSICmd_PERSISTENT_RESERVE_OUT = 0x5F, /* Optional */␊
878 kSCSICmd_RECEIVE_DIAGNOSTICS_RESULTS = 0x17, /* Mandatory */␊
879 kSCSICmd_RELEASE_6 = 0x17, /* Optional */␊
880 kSCSICmd_RELEASE_10 = 0x57, /* Optional */␊
881 kSCSICmd_REQUEST_SENSE = 0x03, /* Mandatory */␊
882 kSCSICmd_RESERVE_6 = 0x16, /* Optional */␊
883 kSCSICmd_RESERVE_10 = 0x56, /* Optional */␊
884 kSCSICmd_SEND_DIAGNOSTICS = 0x1D /* Mandatory */␊
885};␊
886#endif␊
887␊
888#pragma mark -␊
889#pragma mark 0x0E RBC Reduced Block Commands␊
890/* Commands defined by the T10:1240-D Reduced Block Commands (RBC) ␊
891 * (revision 10a, August 18, 1999) command specification. ␊
892 */␊
893#if 0␊
894enum␊
895{␊
896 kSCSICmd_FORMAT_UNIT = 0x04, /* Optional */␊
897 kSCSICmd_READ_10 = 0x28, /* Mandatory */␊
898 kSCSICmd_READ_CAPACITY = 0x25, /* Mandatory */␊
899 kSCSICmd_START_STOP_UNIT = 0x1B, /* Mandatory */␊
900 kSCSICmd_SYNCHRONIZE_CACHE = 0x35, /* Optional */␊
901 kSCSICmd_VERIFY_10 = 0x2F, /* Mandatory */␊
902 kSCSICmd_WRITE_10 = 0x2A, /* Mandatory */␊
903 kSCSICmd_WRITE_BUFFER = 0x3B /* Mandatory for fixed media␊
904 * Optional for removable */␊
905};␊
906#endif␊
907␊
908#pragma mark -␊
909#pragma mark 0x0F OCRW Optical Card Commands␊
910/* Commands defined by the ISO/IEC 14776-381 SCSI Specification for␊
911 * Optical Card Reader/Writer (OCRW) ratified command specification. ␊
912 */␊
913#if 0␊
914enum␊
915{␊
916};␊
917#endif␊
918␊
919#pragma mark -␊
920#pragma mark 0x11 OSD Object-based Storage Commands␊
921/* Commands defined by the T10:1355-D Object-based Storage Commands (OSD) ␊
922 * (revision 1, 18 May 2000) command specification. ␊
923 */␊
924#if 0␊
925enum␊
926{␊
927};␊
928#endif␊
929␊
930#pragma mark -␊
931#pragma mark 0x15 RMC Simplified Multimedia Commands␊
932/* Commands defined by the T10:1364-D Reduced Multimedia Commands (RMC) ␊
933 * (revision 1, November 11, 1999) command specification. ␊
934 */␊
935#if 0␊
936enum␊
937{␊
938};␊
939#endif␊
940␊
941#endif␉/* _SCSI_COMMAND_OPERATION_CODES_H_ */␊
942

Archive Download this file

Revision: 2225