1 | /*␊ |
2 | * Copyright 2008 Islam Ahmed Zaid. All rights reserved. <azismed@gmail.com>␊ |
3 | * AsereBLN: 2009: cleanup and bugfix␊ |
4 | */␊ |
5 | ␊ |
6 | //#include "libsaio.h"␊ |
7 | #include "platform.h"␊ |
8 | #include "cpu.h"␊ |
9 | #include "boot.h"␊ |
10 | ␊ |
11 | #ifndef DEBUG_CPU␊ |
12 | #define DEBUG_CPU 0␊ |
13 | #endif␊ |
14 | ␊ |
15 | #if DEBUG_CPU␊ |
16 | #define DBG(x...)␉␉printf(x)␊ |
17 | #else␊ |
18 | #define DBG(x...)␉␉msglog(x)␊ |
19 | #endif␊ |
20 | ␊ |
21 | /*␊ |
22 | * DFE: Measures the TSC frequency in Hz (64-bit) using the ACPI PM timer␊ |
23 | */␊ |
24 | static uint64_t measure_tsc_frequency(void)␊ |
25 | {␊ |
26 | uint64_t tscStart;␊ |
27 | uint64_t tscEnd;␊ |
28 | uint64_t tscDelta = 0xffffffffffffffffULL;␊ |
29 | unsigned long pollCount;␊ |
30 | uint64_t retval = 0;␊ |
31 | int i;␊ |
32 | ␊ |
33 | /* Time how many TSC ticks elapse in 30 msec using the 8254 PIT␊ |
34 | * counter 2. We run this loop 3 times to make sure the cache␊ |
35 | * is hot and we take the minimum delta from all of the runs.␊ |
36 | * That is to say that we're biased towards measuring the minimum␊ |
37 | * number of TSC ticks that occur while waiting for the timer to␊ |
38 | * expire. That theoretically helps avoid inconsistencies when␊ |
39 | * running under a VM if the TSC is not virtualized and the host␊ |
40 | * steals time. The TSC is normally virtualized for VMware.␊ |
41 | */␊ |
42 | for(i = 0; i < 10; ++i)␊ |
43 | {␊ |
44 | enable_PIT2();␊ |
45 | set_PIT2_mode0(CALIBRATE_LATCH);␊ |
46 | tscStart = rdtsc64();␊ |
47 | pollCount = poll_PIT2_gate();␊ |
48 | tscEnd = rdtsc64();␊ |
49 | /* The poll loop must have run at least a few times for accuracy */␊ |
50 | if(pollCount <= 1)␊ |
51 | continue;␊ |
52 | /* The TSC must increment at LEAST once every millisecond. We␊ |
53 | * should have waited exactly 30 msec so the TSC delta should␊ |
54 | * be >= 30. Anything less and the processor is way too slow.␊ |
55 | */␊ |
56 | if((tscEnd - tscStart) <= CALIBRATE_TIME_MSEC)␊ |
57 | continue;␊ |
58 | // tscDelta = MIN(tscDelta, (tscEnd - tscStart))␊ |
59 | if( (tscEnd - tscStart) < tscDelta )␊ |
60 | tscDelta = tscEnd - tscStart;␊ |
61 | }␊ |
62 | /* tscDelta is now the least number of TSC ticks the processor made in␊ |
63 | * a timespan of 0.03 s (e.g. 30 milliseconds)␊ |
64 | * Linux thus divides by 30 which gives the answer in kiloHertz because␊ |
65 | * 1 / ms = kHz. But we're xnu and most of the rest of the code uses␊ |
66 | * Hz so we need to convert our milliseconds to seconds. Since we're␊ |
67 | * dividing by the milliseconds, we simply multiply by 1000.␊ |
68 | */␊ |
69 | ␊ |
70 | /* Unlike linux, we're not limited to 32-bit, but we do need to take care␊ |
71 | * that we're going to multiply by 1000 first so we do need at least some␊ |
72 | * arithmetic headroom. For now, 32-bit should be enough.␊ |
73 | * Also unlike Linux, our compiler can do 64-bit integer arithmetic.␊ |
74 | */␊ |
75 | if(tscDelta > (1ULL<<32))␊ |
76 | retval = 0;␊ |
77 | else␊ |
78 | {␊ |
79 | retval = tscDelta * 1000 / 30;␊ |
80 | }␊ |
81 | disable_PIT2();␊ |
82 | return retval;␊ |
83 | }␊ |
84 | ␊ |
85 | /*␊ |
86 | * Calculates the FSB and CPU frequencies using specific MSRs for each CPU␊ |
87 | * - multi. is read from a specific MSR. In the case of Intel, there is:␊ |
88 | * a max multi. (used to calculate the FSB freq.),␊ |
89 | * and a current multi. (used to calculate the CPU freq.)␊ |
90 | * - fsbFrequency = tscFrequency / multi␊ |
91 | * - cpuFrequency = fsbFrequency * multi␊ |
92 | */␊ |
93 | ␊ |
94 | void scan_cpu(PlatformInfo_t *p)␊ |
95 | {␊ |
96 | ␉const char *newratio;␊ |
97 | ␉int␉␉␉len, myfsb;␊ |
98 | ␉uint8_t␉␉maxcoef, maxdiv, currcoef, bus_ratio_max, bus_ratio_min, currdiv;␊ |
99 | ␉uint32_t␉max_ratio, min_ratio;␊ |
100 | ␉uint64_t␉tscFrequency, fsbFrequency, cpuFrequency, msr, flex_ratio;␊ |
101 | ␊ |
102 | ␉max_ratio = min_ratio = myfsb = bus_ratio_min = 0;␊ |
103 | ␉maxcoef = maxdiv = bus_ratio_max = currcoef = currdiv = 0;␊ |
104 | ␊ |
105 | ␉/* get cpuid values */␊ |
106 | ␉do_cpuid(0x00000000, p->CPU.CPUID[CPUID_0]);␊ |
107 | ␉do_cpuid(0x00000001, p->CPU.CPUID[CPUID_1]);␊ |
108 | ␉do_cpuid(0x00000002, p->CPU.CPUID[CPUID_2]);␊ |
109 | ␉do_cpuid(0x00000003, p->CPU.CPUID[CPUID_3]);␊ |
110 | ␉do_cpuid2(0x00000004, 0, p->CPU.CPUID[CPUID_4]);␊ |
111 | ␉do_cpuid(0x80000000, p->CPU.CPUID[CPUID_80]);␊ |
112 | ␉if ((p->CPU.CPUID[CPUID_80][0] & 0x0000000f) >= 1) {␊ |
113 | ␉␉do_cpuid(0x80000001, p->CPU.CPUID[CPUID_81]);␊ |
114 | ␉}␊ |
115 | #if DEBUG_CPU␊ |
116 | ␉{␊ |
117 | ␉␉int␉␉i;␊ |
118 | ␉␉printf("CPUID Raw Values:\n");␊ |
119 | ␉␉for (i=0; i<CPUID_MAX; i++) {␊ |
120 | ␉␉␉printf("%02d: %08x-%08x-%08x-%08x\n", i,␊ |
121 | ␉␉␉␉p->CPU.CPUID[i][0], p->CPU.CPUID[i][1],␊ |
122 | ␉␉␉␉p->CPU.CPUID[i][2], p->CPU.CPUID[i][3]);␊ |
123 | ␉␉}␊ |
124 | ␉}␊ |
125 | #endif␊ |
126 | ␉p->CPU.Vendor␉␉= p->CPU.CPUID[CPUID_0][1];␊ |
127 | ␉p->CPU.Signature␉= p->CPU.CPUID[CPUID_1][0];␊ |
128 | ␉p->CPU.Stepping␉␉= bitfield(p->CPU.CPUID[CPUID_1][0], 3, 0);␊ |
129 | ␉p->CPU.Model␉␉= bitfield(p->CPU.CPUID[CPUID_1][0], 7, 4);␊ |
130 | ␉p->CPU.Family␉␉= bitfield(p->CPU.CPUID[CPUID_1][0], 11, 8);␊ |
131 | ␉p->CPU.ExtModel␉␉= bitfield(p->CPU.CPUID[CPUID_1][0], 19, 16);␊ |
132 | ␉p->CPU.ExtFamily␉= bitfield(p->CPU.CPUID[CPUID_1][0], 27, 20);␊ |
133 | ␉␊ |
134 | p->CPU.Model += (p->CPU.ExtModel << 4);␊ |
135 | ␊ |
136 | if (p->CPU.Vendor == 0x756E6547 /* Intel */ && ␊ |
137 | p->CPU.Family == 0x06 && ␊ |
138 | p->CPU.Model >= CPUID_MODEL_NEHALEM && ␊ |
139 | p->CPU.Model != CPUID_MODEL_ATOM // MSR is *NOT* available on the Intel Atom CPU␊ |
140 | ){␊ |
141 | msr = rdmsr64(MSR_CORE_THREAD_COUNT);␉␉␉␉␉␉␉␉␉// Undocumented MSR in Nehalem and newer CPUs␊ |
142 | p->CPU.NoCores␉␉= bitfield((uint32_t)msr, 31, 16);␉␉␉␉␉// Using undocumented MSR to get actual values␊ |
143 | p->CPU.NoThreads␉= bitfield((uint32_t)msr, 15, 0);␉␉␉␉␉// Using undocumented MSR to get actual values␊ |
144 | ␉} else {␊ |
145 | p->CPU.NoThreads␉= bitfield(p->CPU.CPUID[CPUID_1][1], 23, 16);␉␉// Use previous method for Cores and Threads␊ |
146 | p->CPU.NoCores␉␉= bitfield(p->CPU.CPUID[CPUID_4][0], 31, 26) + 1;␊ |
147 | ␉}␊ |
148 | ␉␊ |
149 | ␉/* get brand string (if supported) */␊ |
150 | ␉/* Copyright: from Apple's XNU cpuid.c */␊ |
151 | ␉if (p->CPU.CPUID[CPUID_80][0] > 0x80000004) {␊ |
152 | ␉␉uint32_t␉reg[4];␊ |
153 | char str[128], *s;␊ |
154 | ␉␉/*␊ |
155 | ␉␉ * The brand string 48 bytes (max), guaranteed to␊ |
156 | ␉␉ * be NULL terminated.␊ |
157 | ␉␉ */␊ |
158 | ␉␉do_cpuid(0x80000002, reg);␊ |
159 | ␉␉bcopy((char *)reg, &str[0], 16);␊ |
160 | ␉␉do_cpuid(0x80000003, reg);␊ |
161 | ␉␉bcopy((char *)reg, &str[16], 16);␊ |
162 | ␉␉do_cpuid(0x80000004, reg);␊ |
163 | ␉␉bcopy((char *)reg, &str[32], 16);␊ |
164 | ␉␉for (s = str; *s != '\0'; s++) {␊ |
165 | ␉␉␉if (*s != ' ') break;␊ |
166 | ␉␉}␊ |
167 | ␉␉␊ |
168 | ␉␉strlcpy(p->CPU.BrandString,␉s, sizeof(p->CPU.BrandString));␊ |
169 | ␉␉␊ |
170 | ␉␉if (!strncmp(p->CPU.BrandString, CPU_STRING_UNKNOWN, MIN(sizeof(p->CPU.BrandString), strlen(CPU_STRING_UNKNOWN) + 1))) {␊ |
171 | ␉␉␉ /*␊ |
172 | ␉␉␉ * This string means we have a firmware-programmable brand string,␊ |
173 | ␉␉␉ * and the firmware couldn't figure out what sort of CPU we have.␊ |
174 | ␉␉␉ */␊ |
175 | ␉␉␉ p->CPU.BrandString[0] = '\0';␊ |
176 | ␉␉ }␊ |
177 | ␉}␊ |
178 | ␉␊ |
179 | ␉/* setup features */␊ |
180 | ␉if ((bit(23) & p->CPU.CPUID[CPUID_1][3]) != 0) {␊ |
181 | ␉␉p->CPU.Features |= CPU_FEATURE_MMX;␊ |
182 | ␉}␊ |
183 | ␉if ((bit(25) & p->CPU.CPUID[CPUID_1][3]) != 0) {␊ |
184 | ␉␉p->CPU.Features |= CPU_FEATURE_SSE;␊ |
185 | ␉}␊ |
186 | ␉if ((bit(26) & p->CPU.CPUID[CPUID_1][3]) != 0) {␊ |
187 | ␉␉p->CPU.Features |= CPU_FEATURE_SSE2;␊ |
188 | ␉}␊ |
189 | ␉if ((bit(0) & p->CPU.CPUID[CPUID_1][2]) != 0) {␊ |
190 | ␉␉p->CPU.Features |= CPU_FEATURE_SSE3;␊ |
191 | ␉}␊ |
192 | ␉if ((bit(19) & p->CPU.CPUID[CPUID_1][2]) != 0) {␊ |
193 | ␉␉p->CPU.Features |= CPU_FEATURE_SSE41;␊ |
194 | ␉}␊ |
195 | ␉if ((bit(20) & p->CPU.CPUID[CPUID_1][2]) != 0) {␊ |
196 | ␉␉p->CPU.Features |= CPU_FEATURE_SSE42;␊ |
197 | ␉}␊ |
198 | ␉if ((bit(29) & p->CPU.CPUID[CPUID_81][3]) != 0) {␊ |
199 | ␉␉p->CPU.Features |= CPU_FEATURE_EM64T;␊ |
200 | ␉}␊ |
201 | ␉if ((bit(5) & p->CPU.CPUID[CPUID_1][3]) != 0) {␊ |
202 | ␉␉p->CPU.Features |= CPU_FEATURE_MSR;␊ |
203 | ␉}␊ |
204 | ␉//if ((bit(28) & p->CPU.CPUID[CPUID_1][3]) != 0) {␊ |
205 | ␉if (p->CPU.NoThreads > p->CPU.NoCores) {␊ |
206 | ␉␉p->CPU.Features |= CPU_FEATURE_HTT;␊ |
207 | ␉}␊ |
208 | ␊ |
209 | ␉tscFrequency = measure_tsc_frequency();␊ |
210 | ␉fsbFrequency = 0;␊ |
211 | ␉cpuFrequency = 0;␊ |
212 | ␊ |
213 | ␉if ((p->CPU.Vendor == 0x756E6547 /* Intel */) && ((p->CPU.Family == 0x06) || (p->CPU.Family == 0x0f))) {␊ |
214 | ␉␉int intelCPU = p->CPU.Model;␊ |
215 | ␉␉if ((p->CPU.Family == 0x06 && p->CPU.Model >= 0x0c) || (p->CPU.Family == 0x0f && p->CPU.Model >= 0x03)) {␊ |
216 | ␉␉␉/* Nehalem CPU model */␊ |
217 | ␉␉␉if (p->CPU.Family == 0x06 && (p->CPU.Model == CPU_MODEL_NEHALEM || ␊ |
218 | p->CPU.Model == CPU_MODEL_FIELDS || ␊ |
219 | p->CPU.Model == CPU_MODEL_DALES || ␊ |
220 | p->CPU.Model == CPU_MODEL_DALES_32NM || ␊ |
221 | p->CPU.Model == CPU_MODEL_WESTMERE ||␊ |
222 | p->CPU.Model == CPU_MODEL_NEHALEM_EX ||␊ |
223 | p->CPU.Model == CPU_MODEL_WESTMERE_EX ||␊ |
224 | p->CPU.Model == CPU_MODEL_SANDY ||␊ |
225 | p->CPU.Model == CPU_MODEL_SANDY_XEON)) {␊ |
226 | ␉␉␉␉msr = rdmsr64(MSR_PLATFORM_INFO);␊ |
227 | ␉␉␉␉DBG("msr(%d): platform_info %08x\n", __LINE__, msr & 0xffffffff);␊ |
228 | //kabyl␉␉␉␉DBG("MSR_PLATFORM_INFO (0xCE): 0x%08X%08X\n", (uint32_t)(msr >> 32), (uint32_t)msr);␊ |
229 | ␉␉␉␉bus_ratio_max = (msr >> 8) & 0xff;␊ |
230 | ␉␉␉␉bus_ratio_min = (msr >> 40) & 0xff; //valv: not sure about this one (Remarq.1)␊ |
231 | ␉␉␉␉msr = rdmsr64(MSR_FLEX_RATIO);␊ |
232 | ␉␉␉␉DBG("msr(%d): flex_ratio %08x\n", __LINE__, msr & 0xffffffff);␊ |
233 | //kabyl␉␉␉␉DBG("MSR_FLEX_RATIO (0x194): 0x%08X%08X\n", (uint32_t)(msr >> 32), (uint32_t)msr);␊ |
234 | ␉␉␉␉if ((msr >> 16) & 0x01) {␊ |
235 | ␉␉␉␉␉flex_ratio = (msr >> 8) & 0xff;␊ |
236 | ␉␉␉␉␉/* bcc9: at least on the gigabyte h67ma-ud2h,␊ |
237 | ␉␉␉␉␉ where the cpu multipler can't be changed to␊ |
238 | ␉␉␉␉␉ allow overclocking, the flex_ratio msr has unexpected (to OSX)␊ |
239 | ␉␉␉␉␉ contents. These contents cause mach_kernel to␊ |
240 | ␉␉␉␉␉ fail to compute the bus ratio correctly, instead␊ |
241 | ␉␉␉␉␉ causing the system to crash since tscGranularity␊ |
242 | ␉␉␉␉␉ is inadvertently set to 0.␊ |
243 | ␉␉␉␉␉*/␊ |
244 | ␉␉␉␉␉if (flex_ratio == 0) {␊ |
245 | ␉␉␉␉␉␉/* Clear bit 16 (evidently the␊ |
246 | ␉␉␉␉␉␉ presence bit) */␊ |
247 | ␉␉␉␉␉␉wrmsr64(MSR_FLEX_RATIO, (msr & 0xFFFFFFFFFFFEFFFFULL));␊ |
248 | ␉␉␉␉␉␉msr = rdmsr64(MSR_FLEX_RATIO);␊ |
249 | ␉␉␉␉␉␉verbose("Unusable flex ratio detected. Patched MSR now %08x\n", msr & 0xffffffff);␊ |
250 | ␉␉␉␉␉} else {␊ |
251 | ␉␉␉␉␉␉if (bus_ratio_max > flex_ratio) {␊ |
252 | ␉␉␉␉␉␉␉bus_ratio_max = flex_ratio;␊ |
253 | ␉␉␉␉␉␉}␊ |
254 | ␉␉␉␉␉}␊ |
255 | ␉␉␉␉}␊ |
256 | ␊ |
257 | ␉␉␉␉if (bus_ratio_max) {␊ |
258 | ␉␉␉␉␉fsbFrequency = (tscFrequency / bus_ratio_max);␊ |
259 | ␉␉␉␉}␊ |
260 | ␉␉␉␉//valv: Turbo Ratio Limit␊ |
261 | ␉␉␉␉if ((intelCPU != 0x2e) && (intelCPU != 0x2f)) {␊ |
262 | ␉␉␉␉␉msr = rdmsr64(MSR_TURBO_RATIO_LIMIT);␊ |
263 | ␉␉␉␉␉cpuFrequency = bus_ratio_max * fsbFrequency;␊ |
264 | ␉␉␉␉␉max_ratio = bus_ratio_max * 10;␊ |
265 | ␉␉␉␉} else {␊ |
266 | ␉␉␉␉␉cpuFrequency = tscFrequency;␊ |
267 | ␉␉␉␉}␊ |
268 | ␉␉␉␉if ((getValueForKey(kBusRatioKey, &newratio, &len, &bootInfo->bootConfig)) && (len <= 4)) {␊ |
269 | ␉␉␉␉␉max_ratio = atoi(newratio);␊ |
270 | ␉␉␉␉␉max_ratio = (max_ratio * 10);␊ |
271 | ␉␉␉␉␉if (len >= 3) max_ratio = (max_ratio + 5);␊ |
272 | ␊ |
273 | ␉␉␉␉␉verbose("Bus-Ratio: min=%d, max=%s\n", bus_ratio_min, newratio);␊ |
274 | ␊ |
275 | ␉␉␉␉␉// extreme overclockers may love 320 ;)␊ |
276 | ␉␉␉␉␉if ((max_ratio >= min_ratio) && (max_ratio <= 320)) {␊ |
277 | ␉␉␉␉␉␉cpuFrequency = (fsbFrequency * max_ratio) / 10;␊ |
278 | ␉␉␉␉␉␉if (len >= 3) maxdiv = 1;␊ |
279 | ␉␉␉␉␉␉else maxdiv = 0;␊ |
280 | ␉␉␉␉␉} else {␊ |
281 | ␉␉␉␉␉␉max_ratio = (bus_ratio_max * 10);␊ |
282 | ␉␉␉␉␉}␊ |
283 | ␉␉␉␉}␊ |
284 | ␉␉␉␉//valv: to be uncommented if Remarq.1 didn't stick␊ |
285 | ␉␉␉␉/*if(bus_ratio_max > 0) bus_ratio = flex_ratio;*/␊ |
286 | ␉␉␉␉p->CPU.MaxRatio = max_ratio;␊ |
287 | ␉␉␉␉p->CPU.MinRatio = min_ratio;␊ |
288 | ␊ |
289 | ␉␉␉␉myfsb = fsbFrequency / 1000000;␊ |
290 | ␉␉␉␉verbose("Sticking with [BCLK: %dMhz, Bus-Ratio: %d]\n", myfsb, max_ratio);␊ |
291 | ␉␉␉␉currcoef = bus_ratio_max;␊ |
292 | ␉␉␉} else {␊ |
293 | ␉␉␉␉msr = rdmsr64(MSR_IA32_PERF_STATUS);␊ |
294 | //Azi: __FILE__ %d, __LINE__ %d, __FUNCTION__ %s␊ |
295 | //␉␉␉␉msglog("%s - %d\n", __FUNCTION__, __LINE__);␊ |
296 | ␉␉␉␉DBG("msr(%d): ia32_perf_stat 0x%08x\n", __LINE__, msr & 0xffffffff);␊ |
297 | ␉␉␉␉//Azi: 0x00000F2700000F27␊ |
298 | //kabyl␉␉␉␉DBG("MSR_IA32_PERF_STATUS (0x198): 0x%08X%08X\n", (uint32_t)(msr >> 32), (uint32_t)msr);␊ |
299 | ␉␉␉␉currcoef = (msr >> 8) & 0x1f;␊ |
300 | ␉␉␉␉/* Non-integer bus ratio for the max-multi*/␊ |
301 | ␉␉␉␉maxdiv = (msr >> 46) & 0x01;␊ |
302 | ␉␉␉␉/* Non-integer bus ratio for the current-multi (undocumented)*/␊ |
303 | ␉␉␉␉currdiv = (msr >> 14) & 0x01;␊ |
304 | ␊ |
305 | ␉␉␉␉if ((p->CPU.Family == 0x06 && p->CPU.Model >= 0x0e) || (p->CPU.Family == 0x0f)) // This will always be model >= 3␊ |
306 | ␉␉␉␉{␊ |
307 | ␉␉␉␉␉/* On these models, maxcoef defines TSC freq */␊ |
308 | ␉␉␉␉␉maxcoef = (msr >> 40) & 0x1f;␊ |
309 | ␉␉␉␉} else {␊ |
310 | ␉␉␉␉␉/* On lower models, currcoef defines TSC freq */␊ |
311 | ␉␉␉␉␉/* XXX */␊ |
312 | ␉␉␉␉␉maxcoef = currcoef;␊ |
313 | ␉␉␉␉}␊ |
314 | ␊ |
315 | ␉␉␉␉if (maxcoef) {␊ |
316 | ␉␉␉␉␉if (maxdiv) {␊ |
317 | ␉␉␉␉␉␉fsbFrequency = ((tscFrequency * 2) / ((maxcoef * 2) + 1));␊ |
318 | ␉␉␉␉␉} else {␊ |
319 | ␉␉␉␉␉␉fsbFrequency = (tscFrequency / maxcoef);␊ |
320 | ␉␉␉␉␉}␊ |
321 | ␉␉␉␉␉if (currdiv) {␊ |
322 | ␉␉␉␉␉␉cpuFrequency = (fsbFrequency * ((currcoef * 2) + 1) / 2);␊ |
323 | ␉␉␉␉␉} else {␊ |
324 | ␉␉␉␉␉␉cpuFrequency = (fsbFrequency * currcoef);␊ |
325 | ␉␉␉␉␉}␊ |
326 | ␉␉␉␉␉DBG("max: %d%s current: %d%s\n", maxcoef, maxdiv ? ".5" : "",currcoef, currdiv ? ".5" : "");␊ |
327 | ␉␉␉␉}␊ |
328 | ␉␉␉}␊ |
329 | ␉␉}␊ |
330 | ␉␉/* Mobile CPU */␊ |
331 | ␉␉if (rdmsr64(MSR_IA32_PLATFORM_ID) & (1<<28)) {␊ |
332 | ␉␉␉p->CPU.Features |= CPU_FEATURE_MOBILE;␊ |
333 | ␉␉}␊ |
334 | ␉}␊ |
335 | #if 0␊ |
336 | ␉else if((p->CPU.Vendor == 0x68747541 /* AMD */) && (p->CPU.Family == 0x0f)) {␊ |
337 | ␉␉if(p->CPU.ExtFamily == 0x00 /* K8 */) {␊ |
338 | ␉␉␉msr = rdmsr64(K8_FIDVID_STATUS);␊ |
339 | ␉␉␉currcoef = (msr & 0x3f) / 2 + 4;␊ |
340 | ␉␉␉currdiv = (msr & 0x01) * 2;␊ |
341 | ␉␉} else if(p->CPU.ExtFamily >= 0x01 /* K10+ */) {␊ |
342 | ␉␉␉msr = rdmsr64(K10_COFVID_STATUS);␊ |
343 | ␉␉␉if(p->CPU.ExtFamily == 0x01 /* K10 */)␊ |
344 | ␉␉␉␉currcoef = (msr & 0x3f) + 0x10;␊ |
345 | ␉␉␉else /* K11+ */␊ |
346 | ␉␉␉␉currcoef = (msr & 0x3f) + 0x08;␊ |
347 | ␉␉␉currdiv = (2 << ((msr >> 6) & 0x07));␊ |
348 | ␉␉}␊ |
349 | ␊ |
350 | ␉␉if (currcoef) {␊ |
351 | ␉␉␉if (currdiv) {␊ |
352 | ␉␉␉␉fsbFrequency = ((tscFrequency * currdiv) / currcoef);␊ |
353 | ␉␉␉␉DBG("%d.%d\n", currcoef / currdiv, ((currcoef % currdiv) * 100) / currdiv);␊ |
354 | ␉␉␉} else {␊ |
355 | ␉␉␉␉fsbFrequency = (tscFrequency / currcoef);␊ |
356 | ␉␉␉␉DBG("%d\n", currcoef);␊ |
357 | ␉␉␉}␊ |
358 | ␉␉␉fsbFrequency = (tscFrequency / currcoef);␊ |
359 | ␉␉␉cpuFrequency = tscFrequency;␊ |
360 | ␉␉}␊ |
361 | ␉}␊ |
362 | ␊ |
363 | ␉if (!fsbFrequency) {␊ |
364 | ␉␉fsbFrequency = (DEFAULT_FSB * 1000);␊ |
365 | ␉␉cpuFrequency = tscFrequency;␊ |
366 | ␉␉DBG("0 ! using the default value for FSB !\n");␊ |
367 | ␉}␊ |
368 | #endif␊ |
369 | ␊ |
370 | ␉p->CPU.MaxCoef = maxcoef;␊ |
371 | ␉p->CPU.MaxDiv = maxdiv;␊ |
372 | ␉p->CPU.CurrCoef = currcoef;␊ |
373 | ␉p->CPU.CurrDiv = currdiv;␊ |
374 | ␉p->CPU.TSCFrequency = tscFrequency;␊ |
375 | ␉p->CPU.FSBFrequency = fsbFrequency;␊ |
376 | ␉p->CPU.CPUFrequency = cpuFrequency;␊ |
377 | ␊ |
378 | ␉DBG("CPU: Brand String: %s\n",␉␉␉␉p->CPU.BrandString);␊ |
379 | ␉DBG("CPU: Vendor/Family/ExtFamily: 0x%x/0x%x/0x%x\n",␉p->CPU.Vendor, p->CPU.Family, p->CPU.ExtFamily);␊ |
380 | ␉DBG("CPU: Model/ExtModel/Stepping: 0x%x/0x%x/0x%x\n",␉p->CPU.Model, p->CPU.ExtModel, p->CPU.Stepping);␊ |
381 | ␉DBG("CPU: MaxCoef/CurrCoef: 0x%x/0x%x\n",␉␉p->CPU.MaxCoef, p->CPU.CurrCoef);␊ |
382 | ␉DBG("CPU: MaxDiv/CurrDiv: 0x%x/0x%x\n",␉␉p->CPU.MaxDiv, p->CPU.CurrDiv);␊ |
383 | ␉DBG("CPU: TSCFreq: %dMHz\n",␉␉␉p->CPU.TSCFrequency / 1000000);␊ |
384 | ␉DBG("CPU: FSBFreq: %dMHz\n",␉␉␉p->CPU.FSBFrequency / 1000000);␊ |
385 | ␉DBG("CPU: CPUFreq: %dMHz\n",␉␉␉p->CPU.CPUFrequency / 1000000);␊ |
386 | ␉DBG("CPU: NoCores/NoThreads: %d/%d\n",␉␉␉p->CPU.NoCores, p->CPU.NoThreads);␊ |
387 | ␉DBG("CPU: Features: 0x%08x\n",␉␉␉p->CPU.Features);␊ |
388 | #if DEBUG_CPU␊ |
389 | ␉pause();␊ |
390 | #endif␊ |
391 | }␊ |
392 | |