Index: branches/blackosx/trunk/package/Scripts/EFI/postinstall
===================================================================
--- branches/blackosx/trunk/package/Scripts/EFI/postinstall	(revision 0)
+++ branches/blackosx/trunk/package/Scripts/EFI/postinstall	(revision 201)
@@ -0,0 +1,450 @@
+#!/bin/bash
+
+diskloader="/usr/standalone/i386/boot0"
+diskloaderdualboot="/usr/standalone/i386/boot0hfs"
+partitionloaderhfs="/usr/standalone/i386/boot1h"
+partitionloaderfat="/usr/standalone/i386/boot1f32"
+filesystemloader="/usr/standalone/i386/boot"
+bootervolumename="EFI"
+booterextensions="Extra/Extensions"
+
+bootresources="${0%/*}"
+
+diskmicrocodetype[1]="GRUB,47525542"
+diskmicrocodetype[2]="LILO,4c494c4f"
+
+start ()
+{
+# $1 volume
+
+osxvolume="${@}"
+
+if [ -z "${osxvolume}" ]; then
+	echo
+	echo "Cannot find the volume. Exiting."
+	exit
+fi
+
+bootdev=$( df "${osxvolume}" | sed -n '2p' | awk '{print $1}' )
+
+if [ "${bootdev}" = "${bootdev#*disk*s}" ]; then
+	echo
+	echo "ERROR Volume does not use slices."
+	echo "Volume may be stored on a RAID array."
+	echo
+	exit
+fi
+
+bootuuid=$( diskutil info "$bootdev" | grep Volume\ UUID | awk {'print $3'} )
+partitiontable=$( diskutil list ${bootdev%s*} | sed -n '3p' | awk '{print $2}' )
+
+if [ ${partitiontable} != "GUID_partition_scheme" ]; then
+	echo
+	echo "ERROR Volume is not on a GPT partitioned disc."
+	echo
+	exit
+fi
+
+echo "==============================================="
+echo "Partition Type Identified:"
+echo "**************************"
+echo "GPT found."
+echo "-----------------------------------------------"
+echo ""
+echo ""
+
+
+echo "==============================================="
+echo "Installer Variables Part 1:"
+echo "***************************"
+echo "OS X Volume is ${osxvolume}"
+echo "OX X Volume device is ${bootdev}"
+echo "OS X Volume UUID is ${bootuuid}"
+echo "-----------------------------------------------"
+echo ""
+echo ""
+
+
+bootvolume="/Volumes/$bootervolumename"
+bootdev=${bootdev%s*}s1
+bootrdev=${bootdev/disk/rdisk}
+bootdisk=${bootdev%s*}
+bootrdisk=${bootdisk/disk/rdisk}
+bootslice=${bootdev#*disk*s}
+
+echo "==============================================="
+echo "Installer Variables Part 2:"
+echo "***************************"
+echo "EFI Volume device is ${bootdev}"
+echo "EFI Volume raw device is ${bootrdev}"
+echo "EFI Volume slice is ${bootslice}"
+echo "Disk device is ${bootdisk}"
+echo "Disk raw device is ${bootrdisk}"
+echo "Disk loader normal is ${diskloader}"
+echo "Disk loader dual boot is ${diskloaderdualboot}"
+echo "Partition loader HFS is ${partitionloaderhfs}"
+echo "Partition loader FAT is ${partitionloaderfat}"
+echo "Filesystem loader is ${filesystemloader}"
+echo "-----------------------------------------------"
+echo ""
+echo ""
+
+
+checkdiskmicrocodetype ()
+{
+echo "==============================================="
+echo "Diskmicrocodetype:"
+echo "******************"
+
+diskmicrocode=$( dd 2>/dev/null if=${bootdisk} count=1 | dd 2>/dev/null count=1 bs=437 | perl -ne '@a=split"";for(@a){printf"%02x",ord}' )
+
+diskmicrocodetypecounter=0
+while [ ${diskmicrocodetypecounter} -lt ${#diskmicrocodetype[@]} ]; do
+        diskmicrocodetypecounter=$(( ${diskmicrocodetypecounter} + 1 ))
+        diskmicrocodetypeid=${diskmicrocodetype[${diskmicrocodetypecounter}]#*,}
+        if [ ! "${diskmicrocode}" = "${diskmicrocode/${diskmicrocodetypeid}/}" ]; then
+                echo "${diskmicrocodetype[${diskmicrocodetypecounter}]%,*} found."
+	else
+		echo "Didn't find a match for ${diskmicrocodetype[${diskmicrocodetypecounter}]%,*}"
+        fi
+done
+echo "-----------------------------------------------"
+echo ""
+echo ""
+}
+
+
+checkdiskmicrocode ()
+{
+echo "==============================================="
+echo "Diskmicrocode:"
+echo "*************"
+
+# Note: The checks for Boot0 and Boot0hfs assume the code doesn't change!!
+
+# 1 action ( check or set )
+
+diskmicrocode=$( dd 2>/dev/null if=${bootdisk} count=1 | dd 2>/dev/null count=1 bs=437 | perl -ne '@a=split"";for(@a){printf"%02x",ord}' )
+diskmicrocodemd5=$( dd 2>/dev/null if=${bootdisk} count=1 | dd 2>/dev/null count=1 bs=437 | md5 )
+
+if [ $( echo "${diskmicrocode}" | awk -F0 '{print NF-1}' ) = 874 ]; then
+	echo "Diskmicrocode = 874 (Which means the first 437 bytes of the MBR Disk Sector is blank)"
+	if [ "${1}" = "set" ]; then
+		echo "No disk microcode found. Updating."
+		diskupdate=true
+		echo "diskupdate is now set to true."
+	else
+		echo "No disk microcode found."
+	fi
+else
+	# There is already something on the MBR 
+	if [ ${1} = set ]; then
+
+		# See if a Windows bootloader already exists
+		windowsloader=$( dd 2>/dev/null if=${bootdisk} count=4 bs=1 | xxd | awk '{print $2$3}' )
+		if [ "${windowsloader}" == "33c08ed0" ]  ; then
+			echo "Found existing Windows Boot Loader"
+			echo "Will replace loader with Boot0hfs"
+			diskupdate=true
+			echo "diskupdate is now set to true."
+		fi
+
+		# See if a Chameleon stage0 boot file already exists
+		stage0type=$( dd 2>/dev/null if=${bootdisk} count=3 bs=1 skip=105 | xxd | awk '{print $2$3}' )
+		if [ "${stage0type}" == "0b807c" ] || [ "${stage0type}" == "0a803c" ] ; then
+
+			echo "Found existing Chameleon Stage 0 Loader"
+			# if found Boot0HFS without a Windows installation set diskupdate to true
+			if [ "${stage0type}" == "0b807c" ] && [ "${disksignature}" == "00000000" ]; then
+				echo "Found existing Chameleon Boot0HFS without a Windows installation"
+				echo "Will replace loader with Boot0"
+				diskupdate=true
+				echo "diskupdate is now set to true."
+			fi
+
+			# if found Boot0 with a Windows installation set diskupdate to true
+			if [ "${stage0type}" == "0a803c" ] && [ "${disksignature}" != "00000000" ]; then
+				echo "Found existing Chameleon Boot0 with a Windows installation"
+				echo "Will replace loader with Boot0hfs"
+				diskupdate=true
+				echo "diskupdate is now set to true."
+			fi
+		fi
+	
+		# If neither a Windows or Chameleon Boot Loader exists
+		if [ "${stage0type}" != "0b807c" ] && [ "${stage0type}" != "0a803c" ] && [ "${windowsloader}" != "33c08ed0" ]  ; then
+			test=$(echo "${diskmicrocode}" | awk -F0 '{print NF-1}' )
+			echo "Disk microcode found: ${test} - Preserving."
+			echo "diskupdate is left at false"
+		fi
+	else
+		test=$(echo "${diskmicrocode}" | awk -F0 '{print NF-1}' )
+		echo "Disk microcode found: ${test}"
+	fi
+fi
+echo "-----------------------------------------------"
+echo ""
+echo ""
+}
+
+
+checkdisksignature ()
+{
+echo "==============================================="
+echo "Find Disk Signature:"
+echo "*************"
+disksignature=$( dd 2>/dev/null if=${bootdisk} count=1 | dd 2>/dev/null count=4 bs=1 skip=440 | perl -ne '@a=split"";for(@a){printf"%02x",ord}' )
+
+echo "${disksignature}"
+
+if [ $disksignature = "00000000" ]; then
+	echo "Just Zero's found meaning Windows isn't installed."
+else
+	echo "Non Zero means we've found a Windows installation"
+fi
+echo "-----------------------------------------------"
+echo ""
+echo ""
+}
+
+
+checkpartitionbootcode ()
+{
+echo "==============================================="
+echo "Find Partition Bootcode:"
+echo "************************"
+
+# 1 action ( check or set )
+
+partitionbootcode=$( dd if=${bootrdev} count=1 2>/dev/null | perl -ne '@a=split"";for(@a){printf"%02x",ord}' )
+partitionbootcodeextended=$( dd if=${bootrdev} count=1 skip=1 2>/dev/null | perl -ne '@a=split"";for(@a){printf"%02x",ord}' )
+
+if [ $( echo "${partitionbootcode}" | awk -F0 '{print NF-1}' ) = 1024 ]; then
+	echo "partitionbootcode = 1024 (Which means the whole 512 bytes of the MBR Disk Sector is blank)"
+	if [ "${1}" = "set" ]; then
+		echo "No partition bootcode found. Updating."
+	else
+		echo "No partition bootcode found."
+	fi
+else
+	if [ "${1}" = "set" ]; then
+		echo "Partition bootcode found. Overwriting."
+	else
+		echo "Partition bootcode found."
+	fi
+	if [ $( echo "${partitionbootcodeextended}" | awk -F0 '{print NF-1}' ) = 1024 ]; then
+		partitionbootcodemd5=$( dd 2>/dev/null if=${bootrdev} count=1 | md5 )
+	else
+		partitionbootcodemd5=$( dd 2>/dev/null if=${bootrdev} count=2 | md5 )
+		echo "Partition bootcode is dual sector."
+	fi
+	echo "Partition bootcode MD5 is ${partitionbootcodemd5}"
+fi
+echo "-----------------------------------------------"
+echo ""
+echo ""
+}
+
+
+#checkpartitionactive ()
+#{
+#partitionactive=$( fdisk440 -d ${bootrdisk} | grep -n "*" | awk -F: '{print $1}')
+
+#if [ -n "${partitionactive}" ]; then 
+#	echo "Partition flagged active is ${partitionactive}"
+#else
+#	echo "No partition flagged active."
+#fi
+
+#}
+}
+
+
+start ${3}
+
+
+echo "==============================================="
+echo "Check the format of the EFI partition"
+echo "*************************************"
+
+if [ "$( df | grep ${bootdev} )" ]; then
+	echo "${bootdev} is currently mounted, so un-mounting it"
+	umount -f ${bootdev}
+else
+	echo "EFI partition is currently not mounted"
+fi 
+
+#if [[ `dd if=/dev/disk${1}s1 count=8 bs=1 skip=82 | uuencode -m -|head -n 2|tail -n 1` != "RkFUMzIgICA=" ]]; then
+#	echo "${bootdev} isn't a FAT32 partition"
+#	newfs_msdos -v "${bootervolumename}" "${bootdev}"
+#fi 
+
+if [ "$( fstyp ${bootdev} | grep hfs )" ]; then
+	echo "${bootdev} is a currently formatted as HFS"
+	efiformat="hfs"
+fi
+if [ "$( fstyp ${bootdev} | grep msdos )" ]; then
+	echo "${bootdev} is currently formatted as msdos"
+	efiformat="msdos"
+	#echo "Executing command: newfs_msdos -F 32 ${bootdev}"
+	#newfs_msdos -F 32 "${bootdev}"
+fi 
+echo "-----------------------------------------------"
+echo ""
+echo ""
+
+
+diskupdate=false
+
+
+checkdisksignature
+checkdiskmicrocodetype
+checkdiskmicrocode set
+checkpartitionbootcode set
+#checkpartitionactive
+
+
+echo "==============================================="
+echo "Can we install the Chameleon bootloader files?:"
+echo "**********************************************"
+
+if ${diskupdate}; then
+	echo "Diskupdate = true, so yes"
+	#---------------------------------------------------------------------
+	# Check bytes 438-446 of the GPTdiskProtectiveMBR for a Windows Disk Signature
+	# If thereีs no Windows disk signature then we can write boot0
+	#---------------------------------------------------------------------
+
+	if [ ${disksignature} == "00000000" ]; then
+		echo "Executing command: fdisk440 -u -f ${diskloader} -y ${bootdisk}"
+		fdisk440 -u -f "${osxvolume}/${diskloader}" -y ${bootdisk}
+	else
+		#---------------------------------------------------------------------
+		# If it exists then Windows is also installed on the HDD and we need to write boot0hfs
+		#---------------------------------------------------------------------
+
+		echo "Executing command: fdisk440 -u -f ${diskloaderdualboot} -y ${bootdisk}"
+		fdisk440 -u -f "${osxvolume}/${diskloaderdualboot}" -y ${bootdisk}
+	fi
+else
+	echo "Diskupdate is false, so no stage 0 file was written"
+fi
+
+
+#echo "Executing command: dd if=${partitionloader} of=${bootrdev}"
+#dd if="${osxvolume}/${partitionloader}" of=${bootrdev}
+
+echo "Prepare Stage 1 loader"
+
+echo "Executing command: dd if=${bootrdev} count=1 bs=512 of=/tmp/origbs"
+dd if=${bootrdev} count=1 bs=512 of=/tmp/origbs
+
+if [ ${efiformat} = "hfs" ]; then
+	echo "Executing command: cp ${osxvolume}/${partitionloaderhfs} /tmp/newbs"
+	cp "${osxvolume}/${partitionloaderhfs}" /tmp/newbs
+fi
+
+if [ ${efiformat} = "msdos" ]; then
+	echo "Executing command: cp ${osxvolume}/${partitionloaderfat} /tmp/newbs"
+	cp "${osxvolume}/${partitionloaderfat}" /tmp/newbs
+fi
+
+echo "Executing command: dd if=/tmp/origbs of=/tmp/newbs skip=3 seek=3 bs=1 count=87 conv=notrunc"
+dd if=/tmp/origbs of=/tmp/newbs skip=3 seek=3 bs=1 count=87 conv=notrunc
+
+echo "Write Stage 1 loader"
+
+echo "Executing command: dd of=${bootrdev} count=1 bs=512 if=/tmp/newbs"
+dd if=/tmp/newbs of=${bootrdev} count=1 bs=512
+
+echo "-----------------------------------------------"
+echo ""
+echo ""
+
+
+echo "==============================================="
+echo "Set Active Partition ONLY if Windows is not installed:"
+echo "*****************************************************"
+
+# If table is MBR make the correct slice active. If table is GPT make the first partition active (BadAxe compatibility).
+#[ "${partitiontable}" = "GUID_partition_scheme" ] && bootslice=1
+#if [[ "${partitiontable}" = "FDisk_partition_scheme" ||  "${partitiontable}" = "GUID_partition_scheme" ]]; then
+#	fdisk440 -e ${bootdisk} <<-MAKEACTIVE
+#	print
+#	flag ${bootslice}
+#	write
+#	y
+#	quit
+#	MAKEACTIVE
+#fi
+
+if [ ${disksignature} == "00000000" ]; then
+	# echo "Windows is not installed so let's change the active partition"
+
+	partitionactive=$( fdisk440 -d ${bootrdisk} | grep -n "*" | awk -F: '{print $1}')
+	echo "Current Active Partition: ${partitionactive}"
+
+	if [ "${partitionactive}" = "${bootslice}" ]; then
+		echo "${bootvolume} is already flagged as active"
+	else
+		echo "${bootvolume} is not flagged as active, so let's do it."
+		# BadAxe requires EFI partition to be flagged active.
+		# but it doesn't' hurt to do it for any non-windows partition.
+		
+		fdisk440 -e ${bootrdisk} <<-MAKEACTIVE
+		print
+		flag ${bootslice}
+		write
+		y
+		quit
+		MAKEACTIVE
+	fi
+else
+	echo "Windows is installed so we let that remain the active partition"
+fi
+echo "-----------------------------------------------"
+echo ""
+echo ""
+
+
+#checkdiskmicrocode check
+#checkdisksignature
+#checkpartitionbootcode check
+#checkpartitionactive
+
+
+echo "==============================================="
+echo "Mount EFI partition:"
+echo "********************"
+if [ ${efiformat} = "hfs" ]; then
+	[ -d "${bootvolume}" ] || mkdir -p "${bootvolume}"
+	echo "Executing command: mount_hfs -u 0 -g 0 ${bootdev} ${bootvolume}"
+	mount_hfs -u 0 -g 0 "${bootdev}" "${bootvolume}"
+else
+	[ -d "${bootvolume}" ] || mkdir -p "${bootvolume}"
+	echo "Executing command: mount_msdos -u 0 -g 0 ${bootdev} ${bootvolume}"
+	mount_msdos -u 0 -g 0 "${bootdev}" "${bootvolume}"
+fi
+echo "-----------------------------------------------"
+echo ""
+echo ""
+
+
+echo "==============================================="
+echo "Write Stage 2 loader"
+echo "********************"
+       
+echo "Executing command: cp ${osxvolume}${filesystemloader} ${bootvolume}/boot"
+cp "${osxvolume}${filesystemloader}" "${bootvolume}/boot"
+echo "boot written"
+
+echo "-----------------------------------------------"
+echo ""
+echo ""
+
+# setup link for extras
+#echo "Executing command: ln -s /Volumes/${bootervolumename} ${2}/.Chameleon"
+#ln -s "/Volumes/${bootervolumename}" "${2}/.Chameleon" 
+# setup link for extras
+
+exit
\ No newline at end of file

Property changes on: branches/blackosx/trunk/package/Scripts/EFI/postinstall
___________________________________________________________________
Added: svn:executable
   + *