1 | GUI module:␊ |
2 | ----------␊ |
3 | GUI=No Disable the GUI (enabled by default).␊ |
4 | "Boot Banner"=Yes|No Show boot banner in GUI mode (enabled by default).␊ |
5 | "Legacy Logo"=Yes|No Use the legacy grey apple logo (disabled by default).␊ |
6 | RandomTheme=Yes|No Enable/Disable switching skin randomly at boot time.␊ |
7 | ␊ |
8 | ␊ |
9 | GraphicsEnabler module:␊ |
10 | ----------------------␊ |
11 | GraphicsEnabler=Yes|No Automatic device-properties generation for gfx cards.␊ |
12 | UseAtiROM=Yes|No Use an alternate Ati ROM image ␊ |
13 | (path: /Extra/<vendorid>_<devid>.rom)␊ |
14 | UseNvidiaROM=Yes|No Use an alternate Nvidia ROM image ␊ |
15 | (path: /Extra/<vendorid>_<devid>.rom)␊ |
16 | VBIOS=Yes|No Inject VBIOS to device-properties.␊ |
17 | ␊ |
18 | ␊ |
19 | Networking module:␊ |
20 | -----------------␊ |
21 | EthernetBuiltIn=Yes|No Automatic "built-in"=yes device-properties generation␊ |
22 | for ethernet interfaces.␊ |
23 | ␉␉␉␉␉␉ ␊ |
24 | Memory module:␊ |
25 | -------------␊ |
26 | UseMemDetect=Yes|No␉ Enable/Disable advanced memory detection␊ |
27 | ␊ |
28 | USBFix module:␊ |
29 | ----------␊ |
30 | USBBusFix=Yes Enable all USB fixes below:␊ |
31 | EHCIacquire=Yes Enable the EHCI fix (disabled by default).␊ |
32 | UHCIreset=Yes Enable the UHCI fix (disabled by default).␊ |
33 | USBLegacyOff=Yes Enable the USB Legacy fix (disabled by default).␊ |
34 | ␊ |
35 | HPET module:␊ |
36 | -----------␊ |
37 | ForceHPET=Yes|No Force Enable HPET.␊ |
38 | ␊ |
39 | HibernateEnabler:␊ |
40 | ----------------␊ |
41 | Wake=No Disable wake up after hibernation (default: enabled).␊ |
42 | ForceWake=Yes Force using the sleepimage (disabled by default).␊ |
43 | WakeImage=<file> Use an alternate sleepimage file. ␊ |
44 | (default path is /private/var/vm/sleepimage).␊ |
45 | ␊ |
46 | SMBIOS modules:␊ |
47 | --------------␊ |
48 | SMBIOS=<file> Use an alternate SMBIOS.plist file ␊ |
49 | (default path: /Extra/SMBIOS.plist, ␊ |
50 | ␉␉␉␉␉␉bt(0,0)/Extra/SMBIOS.plist).␊ |
51 | ␊ |
52 | SMBIOSdefaults=No Don't use the Default values for SMBIOS overriding␊ |
53 | if smbios.plist doesn't exist, factory␊ |
54 | values are kept.␊ |
55 | ␊ |
56 | RamDiskLoader module:␊ |
57 | -------------------- ␊ |
58 | md0=<file> Load raw img file into memory for use as XNU's md0␊ |
59 | ramdisk. /Extra/Postboot.img is used otherwise.␉␊ |
60 | ␉␉␉␉␉␉ ␊ |
61 | Keymapper module:␊ |
62 | ----------------␉␉␉␉␉␉ ␊ |
63 | KeyboardType=<value> change the type of the Keyboard. (Default is QWERTY)␊ |
64 | ␉␉␉ for now only <value>="AZERTY" is supported.␊ |
65 | ␊ |
66 | CPUfreq module:␊ |
67 | --------------␊ |
68 | FixFSB=Yes␉␉Enable alternative front side bus fix␊ |
69 | ␊ |
70 | MaxBusRatio=<n>␉(was BusRatio) Set the current Bus Ratio to n,␊ |
71 | ␉␉␉ n must be a multiple of 10,␊ |
72 | ␉␉␉ (eg. if you want to set a bus ratio to 8.5, n will be␊ |
73 | ␉␉␉ 8.5*10=85), ␊ |
74 | ␉␉␉ if n = 0, MaxBusRatio = Disable,␊ |
75 | ␉␉␉ if not set, n = the current␊ |
76 | ␉␉␉ bios bus ratio, set this value allow CPUfreq to ␊ |
77 | fix some cosmetic issues.␊ |
78 | ␉␉␉␉␉␉ ␉␉␉ ␊ |
79 | ␊ |
80 | Acpipatcher module:␊ |
81 | ------------------␊ |
82 | DropSSDT=Yes ␉Skip the SSDT tables while relocating the ACPI tables.␊ |
83 | DSDT=<file> ␉Use an alternate DSDT.aml file,␊ |
84 | ␉␉␉ (default path: /DSDT.aml Extra/DSDT.aml,␊ |
85 | ␉␉␉ bt(0,0)/Extra/DSDT.aml).␊ |
86 | ␊ |
87 | quickSSDTsearch=Yes|No If Yes, Acpipatcher will not search ssdt-(x+1).aml ␊ |
88 | ␉␉␉ if ssdt-x.aml do not exist,␊ |
89 | ␉␉␉ (eg. if ssdt-0.aml do not exist,␊ |
90 | Acpipather will not search ssdt-1.aml).␊ |
91 | ␊ |
92 | MaxBusRatio=<n>␉(was BusRatio) Set the current Bus Ratio to n, ␊ |
93 | ␉␉␉ n must be a multiple of 10,␊ |
94 | ␉␉␉␉␉(eg. if you want to set a bus ratio to 8.5, n will be␊ |
95 | ␉␉␉ 8.5*10=85), ␊ |
96 | ␉␉␉ if n = 0, MaxBusRatio = Disable,␊ |
97 | ␉␉␉ if set, Acpipatcher will drop every P-states with␊ |
98 | ␉␉␉ a bus ratio higher than n.␊ |
99 | ␉␉␉␉␉␉ ␊ |
100 | MinBusRatio=<n>␉Set the Minimum Bus Ratio to n,␊ |
101 | ␉␉␉ n must be a multiple of 10,␊ |
102 | ␉␉␉ (eg. if you want to set the bus ratio to 8.5, n will be␊ |
103 | ␉␉␉ 8.5*10=85), if set Acpipatcher will drop every ␊ |
104 | ␉␉␉ P-states with a bus ratio lower than n, ␊ |
105 | ␉␉␉ if n = 0, MinBusRatio = Disable.␊ |
106 | ␉␉ ␊ |
107 | P-States usage e.g: (by default all numbers must be expressed in base 16, ␊ |
108 | ␉␉␉ except the pss statue key and base key itself)␊ |
109 | ␉␉␊ |
110 | ␉␉<key>P-States</key>␊ |
111 | ␉␉<dict>␊ |
112 | ␉␉<key>0</key> // the pss status (must be expressed in Base 10)␊ |
113 | ␉␉<dict>␊ |
114 | ␉␉<key>Bus Master Latency</key>␊ |
115 | ␉␉<string>10</string>␊ |
116 | ␉␉<key>Control</key>␊ |
117 | ␉␉<string>18719</string>␊ |
118 | ␉␉<key>CoreFreq</key>␊ |
119 | ␉␉<string>3164</string>␊ |
120 | ␉␉<key>Transition Latency</key>␊ |
121 | ␉␉<string>10</string>␊ |
122 | ␉␉</dict>␊ |
123 | ␉␉<key>Base</key>␊ |
124 | ␉␉<string>10</string> // must always be expressed in Base 10 ␊ |
125 | ␉␉<key>Mode</key>␊ |
126 | ␉␉<string>Default</string>␊ |
127 | ␉␉</dict> ␉␊ |
128 | ␉␉␉␉␉␉␉␉␉ ␊ |
129 | ␊ |
130 | C-States usage e.g: (by default all numbers must be expressed in base 16, ␊ |
131 | ␉␉␉ except the base key itself)␊ |
132 | ␊ |
133 | ␉␉<key>C-states</key>␊ |
134 | ␉␉<dict>␊ |
135 | ␉␉<key>C1</key>␊ |
136 | ␉␉<dict>␊ |
137 | ␉␉<key>Latency</key>␊ |
138 | ␉␉<string>THE LATENCY FOR THIS STATE</string>␊ |
139 | ␉␉<key>Power</key>␊ |
140 | ␉␉<string>THE POWER FOR THIS STATE</string>␊ |
141 | ␉␉</dict>␊ |
142 | ␉␉.␊ |
143 | ␉␉.␉␉␉␉␉␉␉␊ |
144 | ␉␉<key>C4</key>␊ |
145 | ␉␉<dict>␊ |
146 | ␉␉.␊ |
147 | ␉␉.␊ |
148 | ␉␉</dict>␊ |
149 | ␉␉</dict>␊ |
150 | ␉␉␊ |
151 | DropTables usage e.g: ␊ |
152 | ␊ |
153 | ␉␉<key>ACPIDropTables</key>␊ |
154 | ␉␉<dict>␊ |
155 | ␉␉<key>SSDT</key>␊ |
156 | ␉␉<string></string> // drop ssdt tables␊ |
157 | ␉␉<key>TAMG</key>␊ |
158 | ␉␉<string>Yes</string> //drop TAMG table␊ |
159 | ␉␉<key>ECDT</key>␊ |
160 | ␉␉<string>ANY_VALUE</string> //drop ECDT table␊ |
161 | ␉␉<key>XXXX</key>␊ |
162 | ␉␉<string></string> //drop XXXX table (if exist)␊ |
163 | ␉␉<key>YYYY</key>␊ |
164 | ␉␉<string>No</string> //do not drop YYYY table (if exist)␊ |
165 | ␉␉</dict> |