Root/
| Source at commit 1129 created 12 years 11 months ago. By meklort, Change options.o so that it reloads the system config as well. Also change it so that it uses that config for variables (NOTE: if the calue exists in chameleonConfig, it's used instead. | |
|---|---|
| 1 | /*␊ |
| 2 | * Copyright (c) 2000-2006 Apple Computer, Inc. All rights reserved.␊ |
| 3 | *␊ |
| 4 | * @APPLE_LICENSE_HEADER_START@␊ |
| 5 | * ␊ |
| 6 | * Copyright (c) 1999-2003 Apple Computer, Inc. All Rights Reserved.␊ |
| 7 | * ␊ |
| 8 | * This file contains Original Code and/or Modifications of Original Code␊ |
| 9 | * as defined in and that are subject to the Apple Public Source License␊ |
| 10 | * Version 2.0 (the 'License'). You may not use this file except in␊ |
| 11 | * compliance with the License. Please obtain a copy of the License at␊ |
| 12 | * http://www.opensource.apple.com/apsl/ and read it before using this␊ |
| 13 | * file.␊ |
| 14 | * ␊ |
| 15 | * The Original Code and all software distributed under the License are␊ |
| 16 | * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER␊ |
| 17 | * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,␊ |
| 18 | * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,␊ |
| 19 | * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.␊ |
| 20 | * Please see the License for the specific language governing rights and␊ |
| 21 | * limitations under the License.␊ |
| 22 | * ␊ |
| 23 | * @APPLE_LICENSE_HEADER_END@␊ |
| 24 | */␊ |
| 25 | ␊ |
| 26 | /*!␊ |
| 27 | @header IOATAPIProtocolTransport␊ |
| 28 | Contains the class definition for IOATAPIProtocolTransport.␊ |
| 29 | */␊ |
| 30 | ␊ |
| 31 | ␊ |
| 32 | #ifndef _IOKIT_IO_ATAPI_PROTOCOL_TRANSPORT_H_␊ |
| 33 | #define _IOKIT_IO_ATAPI_PROTOCOL_TRANSPORT_H_␊ |
| 34 | ␊ |
| 35 | #define kIOPropertyATAPIMassStorageCharacteristics ␉␉"ATAPI Mass Storage Characteristics"␊ |
| 36 | ␊ |
| 37 | #if defined(KERNEL) && defined(__cplusplus)␊ |
| 38 | ␊ |
| 39 | /* General IOKit includes */␊ |
| 40 | #include <IOKit/IOLib.h>␊ |
| 41 | #include <IOKit/IOMessage.h>␊ |
| 42 | #include <IOKit/IOService.h>␊ |
| 43 | #include <IOKit/IOCommandPool.h>␊ |
| 44 | ␊ |
| 45 | /* IOKit ATA Family includes */␊ |
| 46 | #include <IOKit/ata/IOATADevice.h>␊ |
| 47 | #include <IOKit/ata/IOATATypes.h>␊ |
| 48 | ␊ |
| 49 | /* IOKit ATA Storage includes */␊ |
| 50 | #include <IOKit/storage/ata/IOATAStorageDefines.h>␊ |
| 51 | ␊ |
| 52 | /* SCSI Architecture Model Family includes */␊ |
| 53 | #include <IOKit/scsi/IOSCSIProtocolServices.h>␊ |
| 54 | ␊ |
| 55 | // Forward class declaration␊ |
| 56 | class IOATAPIProtocolTransport;␊ |
| 57 | ␊ |
| 58 | /*! ␊ |
| 59 | ␉@typedef ATAPIClientData␊ |
| 60 | ␉@param cmd IOATACommand for request.␊ |
| 61 | ␉@param self Pointer to the object. ␊ |
| 62 | ␉@param scsiTask SCSITaskIdentifier of request. ␊ |
| 63 | ␉@discussion This structure is stuffed into the refcon so we can associate which␊ |
| 64 | ␉IOATACommand and SCSITaskIdentifier is completing.␊ |
| 65 | */␊ |
| 66 | ␊ |
| 67 | struct ATAPIClientData␊ |
| 68 | {␊ |
| 69 | ␉IOATACommand *␉␉␉␉cmd;␊ |
| 70 | ␉IOATAPIProtocolTransport *␉self;␊ |
| 71 | ␉SCSITaskIdentifier␉␉␉scsiTask;␊ |
| 72 | };␊ |
| 73 | typedef struct ATAPIClientData ATAPIClientData;␊ |
| 74 | ␊ |
| 75 | ␊ |
| 76 | /*!␊ |
| 77 | ␉@class IOATAPIProtocolTransport␊ |
| 78 | ␉@abstract SCSI Protocol Driver Family for ATAPI Devices. ␊ |
| 79 | ␉@discussion IOATAPIProtocolTransport contains all the bus specific support for ATAPI compliant devices.␊ |
| 80 | ␉To add vendor specific features or workarounds you will sub-class the appropriate␊ |
| 81 | ␉methods of this family. ␊ |
| 82 | */␊ |
| 83 | ␊ |
| 84 | class IOATAPIProtocolTransport : public IOSCSIProtocolServices␊ |
| 85 | {␊ |
| 86 | ␉␊ |
| 87 | ␉OSDeclareDefaultStructors ( IOATAPIProtocolTransport )␊ |
| 88 | ␉␊ |
| 89 | public:␊ |
| 90 | ␊ |
| 91 | ␉// ---- IOService methods overridden ----␊ |
| 92 | ␉␊ |
| 93 | ␉bool ␉␉␉init ␉( OSDictionary * propTable );␊ |
| 94 | ␉␊ |
| 95 | ␉// The start method is called to start our services. If the device␊ |
| 96 | ␉// can be controlled by this object, then we return true, else we␊ |
| 97 | ␉// return false. start() is usually used to allocate resources once␊ |
| 98 | ␉// it is determined that the device can be controlled by this object.␊ |
| 99 | ␉virtual bool ␉start ␉( IOService * provider );␊ |
| 100 | ␉␊ |
| 101 | ␉// The stop method is called to stop our services. It is primarily␊ |
| 102 | ␉// called for deallocation of resources.␊ |
| 103 | ␉virtual void ␉stop ␉( IOService * provider );␊ |
| 104 | ␉␊ |
| 105 | ␉// This method is our last chance to free all resources allocated.␊ |
| 106 | ␉virtual void␉free␉( void );␊ |
| 107 | ␉␊ |
| 108 | ␉␊ |
| 109 | protected:␊ |
| 110 | ␊ |
| 111 | ␉// ---- member variables ----␊ |
| 112 | ␉␊ |
| 113 | ␉IOATADevice *␉␉␉fATADevice;␊ |
| 114 | ␉ataUnitID␉␉␉␉fATAUnitID;␊ |
| 115 | ␉ataDeviceType␉␉␉fATADeviceType;␊ |
| 116 | ␉ataSocketType␉␉␉fATASocketType;␊ |
| 117 | ␉atapiConfig␉␉␉␉fATAPIPacketConfig;␊ |
| 118 | ␉UInt8␉␉␉␉␉fPIOMode;␊ |
| 119 | ␉UInt8␉␉␉␉␉fDMAMode;␊ |
| 120 | ␉UInt8␉␉␉␉␉fUltraDMAMode;␊ |
| 121 | ␉IOCommandGate *␉␉␉fCommandGate;␊ |
| 122 | ␉IOCommandPool *␉␉␉fCommandPool;␊ |
| 123 | ␉IOATACommand *␉␉␉fResetCommand;␊ |
| 124 | ␉IOATACommand *␉␉␉fConfigCommand;␊ |
| 125 | ␉IOATACommand *␉␉␉fIdentifyCommand;␊ |
| 126 | ␉char␉␉␉␉␉fRevision[kSizeOfATARevisionString + 1];␊ |
| 127 | ␉char␉␉␉␉␉fModel[kSizeOfATAModelString + 1];␊ |
| 128 | ␉bool␉␉␉␉␉fWakeUpResetOccurred;␊ |
| 129 | ␉bool␉␉␉␉␉fPhysicallyConnected;␊ |
| 130 | ␉␊ |
| 131 | ␉// Used for low-power polling support␊ |
| 132 | ␉thread_call_t␉␉␉fPollingThread;␊ |
| 133 | ␉␊ |
| 134 | ␉UInt16␉␉␉␉␉fDeviceIdentifyData[256];␊ |
| 135 | ␉IOMemoryDescriptor *␉fDeviceIdentifyBuffer;␊ |
| 136 | ␉bool␉␉␉␉␉fResetInProgress;␊ |
| 137 | ␊ |
| 138 | ␉// Binary Compatibility instance variable expansion␊ |
| 139 | ␉struct ExpansionData␊ |
| 140 | ␉{␊ |
| 141 | ␉␉UInt32␉␉fSemaphore;␊ |
| 142 | ␉␉UInt32␉␉fMediaNotifyValue;␊ |
| 143 | ␉};␊ |
| 144 | ␉ExpansionData * reserved;␊ |
| 145 | ␉␊ |
| 146 | ␉// ---- IOService methods overridden ----␊ |
| 147 | ␉␊ |
| 148 | ␉// The message method is used to listen to messages from our provider, the ATA controller.␊ |
| 149 | ␉// It sends messages for bus reset notifications and for device removal (such as MediaBay,␊ |
| 150 | ␉// PC card, etc.)␊ |
| 151 | ␉virtual IOReturn message ( UInt32 type, IOService * provider, void * argument = 0 );␊ |
| 152 | ␉␊ |
| 153 | ␉// ---- Protocol transport methods overridden ----␊ |
| 154 | ␊ |
| 155 | ␉// Send a SCSI Command to the device. If the command was sent to the␊ |
| 156 | ␉// device and is pending completion, the subclass should return true and␊ |
| 157 | ␉// return back the kSCSIServiceResponse_Request_In_Process response. ␊ |
| 158 | ␉// If the command completes immediately with an error, the subclass will␊ |
| 159 | ␉// return true and return back the appropriate status.␊ |
| 160 | ␉// if the subclass is currently processing all the commands it can, the␊ |
| 161 | ␉// subclass will return false and the command will be resent next time␊ |
| 162 | ␉// CommandCompleted is called. ␊ |
| 163 | ␉virtual bool SendSCSICommand ( ␉SCSITaskIdentifier ␉␉request,␊ |
| 164 | ␉␉␉␉␉␉␉␉␉SCSIServiceResponse * ␉serviceResponse,␊ |
| 165 | ␉␉␉␉␉␉␉␉␉SCSITaskStatus *␉␉taskStatus );␊ |
| 166 | ␉␉␊ |
| 167 | ␉// This is a stub - not implemented in upper layer yet. Eventually, there␊ |
| 168 | ␉// will be a way to abort a task or task set and this method will be called.␊ |
| 169 | ␉// It will abort any commands which have not been executed by the ATA controller␊ |
| 170 | ␉virtual SCSIServiceResponse AbortSCSICommand ( SCSITaskIdentifier request );␊ |
| 171 | ␉␊ |
| 172 | ␉// The IsProtocolServiceSupported method will return true if the protocol␊ |
| 173 | ␉// layer supports the specified feature.␊ |
| 174 | ␉virtual bool IsProtocolServiceSupported ( SCSIProtocolFeature feature, void * serviceValue );␊ |
| 175 | ␉␊ |
| 176 | ␉// The HandleProtocolServiceFeature method will return true if the protocol␊ |
| 177 | ␉// layer properly handled the specified feature.␊ |
| 178 | ␉virtual bool HandleProtocolServiceFeature ( SCSIProtocolFeature feature, void * serviceValue );␊ |
| 179 | ␊ |
| 180 | ␉// ------ Power Management Support ------␊ |
| 181 | ␊ |
| 182 | ␉// The HandlePowerOff method is called to do any bus specific activity␊ |
| 183 | ␉// necessary before shutting down and going to sleep.␊ |
| 184 | ␉virtual IOReturn ␉␉HandlePowerOff ␉( void );␊ |
| 185 | ␊ |
| 186 | ␉// The HandlePowerOn method is called to do any bus specific activity␊ |
| 187 | ␉// necessary to recover from power-on/wake from sleep (e.g. device reset on ATAPI)␊ |
| 188 | ␉virtual IOReturn ␉␉HandlePowerOn ␉( void );␊ |
| 189 | ␊ |
| 190 | ␉␊ |
| 191 | ␉// ---- Methods defined by this class ----␊ |
| 192 | ␊ |
| 193 | ␉// Static callback proc for all SCSITask objects, it calls through to␊ |
| 194 | ␉// SCSITaskCallbackFunction.␊ |
| 195 | ␉static void ␉␉␉sSCSITaskCallbackProc ( IOATACommand * cmd );␊ |
| 196 | ␉␊ |
| 197 | ␉// Callback proc for synchronous ATA only type commands.␊ |
| 198 | ␉static void ␉␉␉sATACallbackSync ( IOATACommand * cmd );␊ |
| 199 | ␊ |
| 200 | ␉// Callback proc for asynchronous ATAPI resets.␊ |
| 201 | ␉static void ␉␉␉sATAPIResetCallback ( IOATACommand * cmd );␊ |
| 202 | ␊ |
| 203 | ␉// Callback proc that does nothing.␊ |
| 204 | ␉static void ␉␉␉sATAPIVoidCallback ( IOATACommand * cmd );␊ |
| 205 | ␊ |
| 206 | ␉// State machine for device configuration.␊ |
| 207 | ␉static void␉␉␉␉sATAPIConfigStateMachine ( IOATACommand * cmd );␊ |
| 208 | ␉␊ |
| 209 | ␉// Used for low-power polling.␊ |
| 210 | ␉static void␉␉␉␉sPollStatusRegister ( void * xptDriver, void * refCon );␊ |
| 211 | ␉␊ |
| 212 | ␉// Static callback for low-power polling.␊ |
| 213 | ␉static void␉␉␉␉sPollStatusRegisterCallback ( IOATACommand * cmd );␊ |
| 214 | ␊ |
| 215 | ␉// This method is called by the SCSITaskCallbackFunction and it calls the␊ |
| 216 | ␉// inherited CommandCompleted message with the results of the task.␊ |
| 217 | ␉virtual void CompleteSCSITask ( SCSITaskIdentifier ␉scsiTask,␊ |
| 218 | ␉␉␉␉␉␉␉␉␉SCSIServiceResponse serviceResponse,␊ |
| 219 | ␉␉␉␉␉␉␉␉␉SCSITaskStatus␉␉taskStatus );␊ |
| 220 | ␊ |
| 221 | ␉// The SCSITaskCallbackFunction method is called by the static callback procedure␊ |
| 222 | ␉// to complete SCSITask operations. This method may be subclassed if a device␊ |
| 223 | ␉// workaround is necessary.␊ |
| 224 | ␉virtual void SCSITaskCallbackFunction ( IOATACommand * ␉␉cmd,␊ |
| 225 | ␉␉␉␉␉␉␉␉␉␉␉SCSITaskIdentifier ␉scsiTask );␊ |
| 226 | ␉␊ |
| 227 | ␉// The ReportATAPIDeviceType method returns the ataDeviceType for ATAPI␊ |
| 228 | ␉virtual ataDeviceType ␉ReportATAPIDeviceType ( void ) const;␊ |
| 229 | ␉␊ |
| 230 | ␉// The InspectDevice method is called to inspect the ATA device and verify␊ |
| 231 | ␉// that it is a device which can be controlled by this object␊ |
| 232 | ␉virtual bool␉␉␉InspectDevice ( IOATADevice * ataDevice );␊ |
| 233 | ␉␊ |
| 234 | ␉// The AllocateATACommandObjects method is called to allocate a pool of␊ |
| 235 | ␉// IOATACommands for general purpose I/O usage.␊ |
| 236 | ␉virtual void ␉␉␉AllocateATACommandObjects ( void );␊ |
| 237 | ␉␊ |
| 238 | ␉// The DeallocateATACommandObjects method is called to deallocate a pool of␊ |
| 239 | ␉// IOATACommands for general purpose I/O usage.␊ |
| 240 | ␉virtual void ␉␉␉DeallocateATACommandObjects ( void );␊ |
| 241 | ␉␊ |
| 242 | ␉// The GetATACommandObject method is called to retrieve a command from␊ |
| 243 | ␉// the pool. Pass true to allow the method to sleep waiting for a command,␊ |
| 244 | ␉// else pass false. If false is passed, there is NO guarantee that a valid␊ |
| 245 | ␉// command will be returned. If true is passed, it IS guaranteed that a␊ |
| 246 | ␉// valid command will be returned, but the thread may be slept waiting for␊ |
| 247 | ␉// those resources.␊ |
| 248 | ␉virtual IOATACommand *␉GetATACommandObject␉( bool okToSleep = true );␊ |
| 249 | ␉␊ |
| 250 | ␉// The ReturnATACommandObject method is called to return a command to␊ |
| 251 | ␉// the pool.␊ |
| 252 | ␉virtual void␉␉␉ReturnATACommandObject␉( IOATACommand * cmd );␊ |
| 253 | ␊ |
| 254 | ␉// The sSwapBytes16 method is used to word-swap the Device Identify data␊ |
| 255 | ␉// on big endian systems. Since all identify data is returned in little endian␊ |
| 256 | ␉// values, it must be word-swapped before inspected.␊ |
| 257 | ␉static void␉␉␉␉sSwapBytes16 ( UInt8 * buffer, IOByteCount numBytesToSwap );␊ |
| 258 | ␉␊ |
| 259 | ␉// The sConvertHighestBitToNumber method is used to find the highest bit in a␊ |
| 260 | ␉// word and return a numeric value.␉This is used to find the highest possible␊ |
| 261 | ␉// values for PIO, DMA, and UltraDMA transfer modes.␊ |
| 262 | ␉static UInt8␉␉␉sConvertHighestBitToNumber ( UInt16 bitField );␊ |
| 263 | ␊ |
| 264 | ␉// The sSetWakeupResetOccurred method is used to safely set member variables␊ |
| 265 | ␉// behind the command gate.␊ |
| 266 | ␉static void␉␉␉␉sSetWakeupResetOccurred ( IOATAPIProtocolTransport * driver,␊ |
| 267 | ␉␉␉␉␉␉␉␉␉␉␉␉ ␉ bool resetOccurred );␊ |
| 268 | ␊ |
| 269 | ␉// The sCheckWakeupResetOccur method is used to safely check member variables␊ |
| 270 | ␉// behind the command gate.␊ |
| 271 | ␉static void␉␉␉␉sCheckWakeupResetOccurred ( IOATAPIProtocolTransport * driver,␊ |
| 272 | ␉␉␉␉␉␉␉␉␉␉␉␉␉␉bool * resetOccurred );␊ |
| 273 | ␉␊ |
| 274 | ␉// The DidWakeupResetOccur method is used to safely find out if a reset␊ |
| 275 | ␉// occurred while we were asleep.␊ |
| 276 | ␉virtual bool␉␉␉CheckWakeupResetOccurred ( void );␊ |
| 277 | ␉␊ |
| 278 | ␉// The WakeupResetOccurred method is used to safely set/clear the reset flag.␊ |
| 279 | ␉virtual void␉␉␉SetWakeupResetOccurred ( bool resetOccurred );␊ |
| 280 | ␊ |
| 281 | ␉// The SetPIOTransferMode method is used to set the programmed input-output (PIO)␊ |
| 282 | ␉// transfer mode. The highest value reported by the device is used.␊ |
| 283 | ␉virtual IOReturn␉␉SetPIOTransferMode ( IOATACommand * cmd, bool forceSync );␊ |
| 284 | ␉␊ |
| 285 | ␉// The SetDMATransferMode method is used to set the direct memory access (DMA)␊ |
| 286 | ␉// transfer mode. The highest value reported by the device is used.␊ |
| 287 | ␉virtual IOReturn␉␉SetDMATransferMode ( IOATACommand * cmd, bool forceSync );␊ |
| 288 | ␉␊ |
| 289 | ␉// The IdentifyAndConfigureATAPIDevice method is called to correctly identify␊ |
| 290 | ␉// and configure an ATAPI device.␊ |
| 291 | ␉virtual IOReturn ␉␉IdentifyAndConfigureATAPIDevice ( void );␊ |
| 292 | ␉␊ |
| 293 | ␉// The ConfigureATAPIDevice method is called to correctly configure the ATAPI␊ |
| 294 | ␉// device. It currently configures any PIO/DMA/UDMA transfer modes but may be␊ |
| 295 | ␉// expanded in the future.␊ |
| 296 | ␉virtual IOReturn ␉␉ConfigureATAPIDevice ( void );␊ |
| 297 | ␊ |
| 298 | ␉// The ReconfigureATAPIDevice method is called to correctly reconfigure the ATAPI␊ |
| 299 | ␉// device after a reset event has occurred (bus reset or device reset). It␊ |
| 300 | ␉// currently reconfigures any PIO/DMA/UDMA transfer modes but may be expanded in␊ |
| 301 | ␉// the future.␊ |
| 302 | ␉virtual IOReturn ␉␉ReconfigureATAPIDevice ( void );␊ |
| 303 | ␉␊ |
| 304 | ␉// The IdentifyATAPIDevice method is called to correctly identify the ATAPI␊ |
| 305 | ␉// device. It currently issues the Identify ATAPI Device packet command and␊ |
| 306 | ␉// uses the data to correctly configure the device.␊ |
| 307 | ␉virtual IOReturn ␉␉IdentifyATAPIDevice ( void );␊ |
| 308 | ␉␊ |
| 309 | ␉// The ResetATAPIDevice method is called to issue a Device Reset (also known␊ |
| 310 | ␉// as a SOFT RESET). This method will only reset the specified device on the␊ |
| 311 | ␉// bus.␊ |
| 312 | ␉virtual IOReturn ␉␉ResetATAPIDevice ( void );␊ |
| 313 | ␉␊ |
| 314 | ␉// The SendATASleepCommand method is called to put an ATAPI drive in sleep␊ |
| 315 | ␉// mode.␊ |
| 316 | ␉virtual IOReturn␉␉SendATASleepCommand ( void );␊ |
| 317 | ␉␊ |
| 318 | ␉// The EnablePollingOfStatusRegister method is called to set up a timer for␊ |
| 319 | ␉// the call to PollStatusRegister. It is called when the SCSI Application Layer␊ |
| 320 | ␉// driver wants to enable low-power polling and after a poll which does not␊ |
| 321 | ␉// see a change in the register status.␊ |
| 322 | ␉virtual void␉␉␉EnablePollingOfStatusRegister ( void );␊ |
| 323 | ␊ |
| 324 | ␉// The DisablePollingOfStatusRegister method is called to cancel any thread␊ |
| 325 | ␉// call which is doing a poll and drop the retain count on the object.␊ |
| 326 | ␉virtual void␉␉␉DisablePollingOfStatusRegister ( void );␊ |
| 327 | ␉␊ |
| 328 | ␉// The PollStatusRegister method is used to do low-power polling on drives which␊ |
| 329 | ␉// support it. This feature is enabled by the SCSI Application Layer driver.␊ |
| 330 | ␉virtual void␉␉␉PollStatusRegister ( void * refCon );␊ |
| 331 | ␉␊ |
| 332 | ␉// Callback method for the polling of the status register.␊ |
| 333 | ␉virtual void␉␉␉PollStatusRegisterCallback ( IOATACommand * cmd );␊ |
| 334 | ␉␊ |
| 335 | ␉// The TurnDrivePowerOff method is called to turn power to the drive OFF␊ |
| 336 | ␉IOReturn␉␉␉␉TurnDrivePowerOff ( void );␊ |
| 337 | ␉␊ |
| 338 | ␉IOReturn␉␉␉␉SendCommand ( IOATACommand * cmd );␊ |
| 339 | ␉IOReturn␉␉␉␉GatedWaitForRequest ( void * data );␊ |
| 340 | ␉␊ |
| 341 | private:␊ |
| 342 | ␉␊ |
| 343 | ␉// Binary Compatibility reserved method space␊ |
| 344 | ␉OSMetaClassDeclareReservedUnused ( IOATAPIProtocolTransport, 1 );␊ |
| 345 | ␉OSMetaClassDeclareReservedUnused ( IOATAPIProtocolTransport, 2 );␊ |
| 346 | ␉OSMetaClassDeclareReservedUnused ( IOATAPIProtocolTransport, 3 );␊ |
| 347 | ␉OSMetaClassDeclareReservedUnused ( IOATAPIProtocolTransport, 4 );␊ |
| 348 | ␉OSMetaClassDeclareReservedUnused ( IOATAPIProtocolTransport, 5 );␊ |
| 349 | ␉OSMetaClassDeclareReservedUnused ( IOATAPIProtocolTransport, 6 );␊ |
| 350 | ␉OSMetaClassDeclareReservedUnused ( IOATAPIProtocolTransport, 7 );␊ |
| 351 | ␉OSMetaClassDeclareReservedUnused ( IOATAPIProtocolTransport, 8 );␊ |
| 352 | ␉OSMetaClassDeclareReservedUnused ( IOATAPIProtocolTransport, 9 );␊ |
| 353 | ␉OSMetaClassDeclareReservedUnused ( IOATAPIProtocolTransport, 10 );␊ |
| 354 | ␉OSMetaClassDeclareReservedUnused ( IOATAPIProtocolTransport, 11 );␊ |
| 355 | ␉OSMetaClassDeclareReservedUnused ( IOATAPIProtocolTransport, 12 );␊ |
| 356 | ␉OSMetaClassDeclareReservedUnused ( IOATAPIProtocolTransport, 13 );␊ |
| 357 | ␉OSMetaClassDeclareReservedUnused ( IOATAPIProtocolTransport, 14 );␊ |
| 358 | ␉OSMetaClassDeclareReservedUnused ( IOATAPIProtocolTransport, 15 );␊ |
| 359 | ␉OSMetaClassDeclareReservedUnused ( IOATAPIProtocolTransport, 16 );␊ |
| 360 | ␉␊ |
| 361 | };␊ |
| 362 | ␊ |
| 363 | #endif /* defined(KERNEL) && defined(__cplusplus) */␊ |
| 364 | ␊ |
| 365 | #endif␉/* _IOKIT_IO_ATAPI_PROTOCOL_TRANSPORT_H_ */ |
