1 | Note: this text doesn't use the "most recent layout" of the main Chameleon CHANGES file.␊ |
2 | ␉ Also, not all the changes done on the code will end up here, for obvious reasons.␊ |
3 | ␉␉␊ |
4 | ␉␉---------------//---------------//---------------␊ |
5 | ␉␉␊ |
6 | - (rev 299)␊ |
7 | Change: added hands-off (without user intervention) setting of EFI32 values, for 32 bit only␊ |
8 | ␉␉processors. Works according to the architecture in use, either chosen by the booter or␊ |
9 | ␉␉forced by user.␊ |
10 | ␉␉␊ |
11 | Note: on pre 10.6 systems, the default EFI values used for 64 bit processors while booting i386␊ |
12 | ␉␉arch (only arch on these systems), will still be EFI64, which causes absolutely no problem.␊ |
13 | ␉␉EFI32 values still can be forced by using the respective booter flag.␊ |
14 | ␉␉Tested only on Leopard.␊ |
15 | ␉␉␊ |
16 | Note: there's a typo on the comment of rev 299 commit;␊ |
17 | ␉␉RC3 should read RC4.␊ |
18 | ␉␉␊ |
19 | Motif: fixes http://forge.voodooprojects.org/p/chameleon/issues/21/.␊ |
20 | ␉␉␊ |
21 | Note: included on the trunk at revs 449 & 450 :) Thanks!␊ |
22 | ␉␉␊ |
23 | ␉␉---------------//---------------//---------------␊ |
24 | ␉␉␊ |
25 | - (rev 320)␊ |
26 | Change: using the original code i suggested to Mozodojo, for memory modules Part Number extraction.␊ |
27 | ␉␉(http://www.projectosx.com/forum/index.php?s=&showtopic=1337&view=findpost&p=8809)␊ |
28 | ␉␉␊ |
29 | Motif: If i don't do:␊ |
30 | ␉␉␊ |
31 | ␉␉if (isspace(sPart[i]))␊ |
32 | ␉␉␉break;␊ |
33 | ␉␉␊ |
34 | ␉␉i get extra characters that don't belong to the Part Number, according to CPU-Z or␊ |
35 | ␉␉Everest. This is consistent on the 2 brands of modules i own, Qimonda & Kingston␊ |
36 | ␉␉and others i saw on some user reports.␊ |
37 | ␉␉If someone wishes to test this, contact me and i'll cook a booter to help debug␊ |
38 | ␉␉this behavior.␊ |
39 | ␉␉␊ |
40 | ␉␉---------------//---------------//---------------␊ |
41 | ␉␉␊ |
42 | - (rev 321)␊ |
43 | Change: a tweak that got hidden on this commit; changed RestartFix from true to false, by default.␊ |
44 | ␉␉␊ |
45 | Motif: this goes against at least one of my "Guidelines" for the booter!␊ |
46 | ␉␉(check README.txt). It's absolutely not needed by all users! If someone proves that this is␊ |
47 | ␉␉needed by more than 50% of the motherboards Chameleon needs to handle atm␊ |
48 | ␉␉(recommended OSx86 motherboards don't count), then i'll change it back to true.␊ |
49 | ␉␉␊ |
50 | ␉␉---------------//---------------//---------------␊ |
51 | ␉␉␊ |
52 | - (rev 335) (REVERTED to trunk way, rev 520)␊ |
53 | Change: merged the educational side of arch=i386 + the practical one of -x32, into a simple 32␊ |
54 | ␉␉booter flag.␊ |
55 | ␉␉␊ |
56 | Note: -x32 was removed from trunk on rev 377.␊ |
57 | ␉␉␊ |
58 | Note: only useful on 64 bit processors.␊ |
59 | ␉␉32 bit only processors, will cause i386 arch to be loaded by default.␊ |
60 | ␉␉␊ |
61 | Motif: 2 keys to do the same, should never had happen!␊ |
62 | ␉␉I really think that arch=i386 is a more "educational" definition, since what we're really␊ |
63 | ␉␉doing here is select an architecture to boot, but while reading the Chameleon TODO␊ |
64 | ␉␉"Integrate... quick shortcut modified version of 18seven" and knowing that these shortcuts␊ |
65 | ␉␉use the 3 + 2 key combination to select i386 arch, i can't avoid to think,␊ |
66 | ␉␉why not extend it to the boot prompt now!?␊ |
67 | ␉␉␊ |
68 | ␉␉---------------//---------------//---------------␊ |
69 | ␉␉␊ |
70 | - (rev 335) (REMOVED, rev 520)␊ |
71 | Change: added -legacy kernel flag. This flag tells the booter to load i386 arch before is passed to␊ |
72 | ␉␉the kernel. This procedure only needs to be done on Snow Leopard. -legacy tells the kernel␊ |
73 | ␉␉to disable "64 Bit Mode", which allows 64 bit processors to run 64 bit apps under i386␊ |
74 | ␉␉mach kernel.␊ |
75 | ␉␉␊ |
76 | ␉␉Type -legacy to get you booted into Legacy Mode.␊ |
77 | ␉␉␊ |
78 | Note: only useful on 64 bit processors.␊ |
79 | ␉␉␊ |
80 | Note: just out of curiosity and for those who don't know, Legacy Mode is in fact the mode used␊ |
81 | ␉␉by 32 bit "only" processors! Since OS X kernel can handle 64 bit apps even on i386 arch,␊ |
82 | ␉␉64 bit processors need this flag to disable any handling of 64 bit instructions, when␊ |
83 | ␉␉"emulating a full" 32 bit environment.␊ |
84 | ␉␉␊ |
85 | Motif: this flag was not being passed on > 10.6; the reason why, is this mode is only available␊ |
86 | ␉␉under i386 arch. So, while testing Meklort's kernel patcher, i felt the need to add this key.␊ |
87 | ␉␉␊ |
88 | ␉␉---------------//---------------//---------------␊ |
89 | ␉␉␊ |
90 | - (rev 335) (REVERTED to trunk way, rev 520)␊ |
91 | Change: added 64 bit booter flag, to keep company to the 32 one :)␊ |
92 | ␉␉␊ |
93 | Motif: mainly to override 32 or -legacy if they are flagged on the Boot.plist.␊ |
94 | ␉␉Like -legacy, was born while testing kernel builds and with the need to do the above.␊ |
95 | ␉␉␊ |
96 | ␉␉---------------//---------------//---------------␊ |
97 | ␉␉␊ |
98 | - (rev 336)␊ |
99 | Change: removed 3 keys to handle PCI Root UID, two of them executing the exact same code␊ |
100 | ␉␉(PCIRootUID & PciRoot). Kept just the already existing PciRoot=<uid>, plus the new code.␊ |
101 | ␉␉␊ |
102 | ␉␉0 is still the default value, use the key to set any other.␊ |
103 | ␉␉␊ |
104 | Motif: these many keys, should never had happened!␊ |
105 | ␉␉This came along when the Asere code was ported to Chameleon, but even on Asere's booter,␊ |
106 | ␉␉what's the point? Compatibility? None, it's seems!␊ |
107 | ␉␉The only key in use on Asere's booter is PCIRootUID. The others are commented out.␊ |
108 | ␉␉␊ |
109 | ␉␉---------------//---------------//---------------␊ |
110 | ␉␉␊ |
111 | - (revs 337 --> 360)␊ |
112 | Changes: file loading related (search algo). The short story:␊ |
113 | ␉␉␊ |
114 | ␉␉Change: added a key to disable "override" Boot.plist from overriding the values on the "default"␊ |
115 | ␉␉␉␉Boot.plist. Only the values overriding is disabled, not the file loading.␊ |
116 | ␉␉␉␉␊ |
117 | ␉␉␉␉CanOverride=n disables overriding of the default Boot.plist values.␊ |
118 | ␉␉␊ |
119 | ␉␉ Note: as far as i know, loading a override Boot.plist is not mandatory!␊ |
120 | ␉␉␉␉Please correct me if i'm wrong.␊ |
121 | ␉␉␊ |
122 | ␉␉Motif: just in case ;)␊ |
123 | ␉␉␉␉I was totally unaware of this Boot.plist override for a long time; this messed with my mind␊ |
124 | ␉␉␉␉a lot of times! too many. So the first thing i did to the booter when i had the chance,␊ |
125 | ␉␉␉␉was make sure i had this under control.␊ |
126 | ␉␉␉␉The problem:␊ |
127 | ␉␉␉␉- first path checked: rd(0,0)/Extra/com.apple.Boot.plist␊ |
128 | ␉␉␉␉ nice, override Boot.plist can be loaded from a ramdisk.␊ |
129 | ␉␉␉␉- second path: /Extra/com.apple.Boot.plist (the plist on Selected volume)␊ |
130 | ␉␉␉␉ great, if we have the booter installed on a usb stick, that by the way it's the␊ |
131 | ␉␉␉␉ main device used these days to hold a rescue booter, the Boot.plist on it will be␊ |
132 | ␉␉␉␉ ignored (unlike one on a ramdisk) and the one on Selected volume loaded.␊ |
133 | ␉␉␉␉- and there's no way to override it (config=<file> is not working).␊ |
134 | ␉␉␉␉This can cause all sorts of anxiety and panic attacks, if you are unaware of this␊ |
135 | ␉␉␉␉like many people are.␊ |
136 | ␉␉␊ |
137 | ␉␉ Note: This key it's not mentioned on BootHelp.txt on purpose, since it's not needed␊ |
138 | ␉␉␉␉with my actual booter configuration.␊ |
139 | ␉␉␊ |
140 | ␉␉␉␉---------------//---------------//---------------␊ |
141 | ␉␉␉␉␊ |
142 | ␉␉Change: added a key to allow overriding the default paths to load Extra extensions.␊ |
143 | ␉␉␉␉kext=/path-to-folder/ loads drivers from an alternate folder.␊ |
144 | ␉␉␉␉␊ |
145 | ␉␉␉␉e.g. kext=/Extra/test/␊ |
146 | ␉␉␊ |
147 | ␉␉ Note: this key needs to point to a "folder" with either a Extensions sub folder or a␊ |
148 | ␉␉␉␉Extensions.mkext kext cache, thus always ends with / (slash).␊ |
149 | ␉␉␊ |
150 | ␉␉ Note: there's a typo on the comment of rev 337 commit;␊ |
151 | ␉␉␉␉Extensions=/path-to-folder/ should be read like kext=/path-to-folder/.␊ |
152 | ␉␉␊ |
153 | ␉␉Motif: there was no key to do this. (read next)␊ |
154 | ␉␉␊ |
155 | ␉␉␉␉---------------//---------------//---------------␊ |
156 | ␉␉␊ |
157 | ␉␉Change: added a "new" search algo, to load Extra extensions.␊ |
158 | ␉␉␉␉Pros:␊ |
159 | ␉␉␉␉- hands-off search of all main files. If you don't want a certain file to be loaded,␊ |
160 | ␉␉␉␉ just don't place it on a default searched path (as usual) or override it with key.␊ |
161 | ␉␉␉␉ First file found, is the one loaded.␊ |
162 | ␉␉␉␉ Check FileLoad.txt for info on searched paths.␊ |
163 | ␉␉␉␉- easy to configure with other paths.␊ |
164 | ␉␉␉␉- easy add to another file load functions.␊ |
165 | ␉␉␉␉- no ambiguous paths!! It's bt(0,0) or nothing! (yeah, i'll explain this else were).␊ |
166 | ␉␉␉␉- consistency across all file loading.␊ |
167 | ␉␉␉␉␊ |
168 | ␉␉␉␉Cons:␊ |
169 | ␉␉␉␉- none that i could test, so far. The only booter install configuration that i can't␊ |
170 | ␉␉␉␉ really test is RAID.␊ |
171 | ␉␉␊ |
172 | ␉␉Motif: after adding the kext= key, i still couldn't override the Extra extensions loaded from␊ |
173 | ␉␉␉␉the Selected volume, in case they were messed up and i needed to load another set from␊ |
174 | ␉␉␉␉else were. It happens that similarly as with override Boot.plist, /Extra/Extensions␊ |
175 | ␉␉␉␉(or /Extra/Extensions.mkext) is the first path to be checked on a HDD and worse,␊ |
176 | ␉␉␉␉there's no argument to limit the action; this path is ALWAYS checked and if files are␊ |
177 | ␉␉␉␉found they are loaded and will override any other files loaded from another path, like a␊ |
178 | ␉␉␉␉ramdisk (only path checked before /Extra/Extensions), making a recovery much more␊ |
179 | ␉␉␉␉complicated (not impossible).␊ |
180 | ␉␉␉␉So, according to at least one of my guidelines (simplify booter use as much as possible),␊ |
181 | ␉␉␉␉changes to the code are/were needed.␊ |
182 | ␉␉␉␉This algo was initially a merge between the search algo found on search_and_get_acpi_fd()␊ |
183 | ␉␉␉␉(acpi_patcher.c), to load ACPI table and the one on LoadDrivers() (driver.c); also, the␊ |
184 | ␉␉␉␉/Extra/* path was still included. I tried a long time playing with the used arguments␊ |
185 | ␉␉␉␉(and others) to keep this path, as all i wanted was to give another priority to the file␊ |
186 | ␉␉␉␉loading, but there was always problems; a file that kept defaulting to the Booter volume␊ |
187 | ␉␉␉␉when i was trying to load it from Selected volume or the other way around.␊ |
188 | ␉␉␉␉So, as i always wanted to try taking advantage of Chameleon's ability to load files␊ |
189 | ␉␉␉␉from specific OS folders (e.g. /Extra/10.5), i gave it a try and here is the outcome.␊ |
190 | ␉␉␉␉␊ |
191 | ␉␉ Note: it doesn't make any sense taking advantage of this specific OS folders and still check␊ |
192 | ␉␉␉␉the Selected volume. Thus except for the obvious files like kernel, SystemVersion.plist,␊ |
193 | ␉␉␉␉system caches, etc..., no other file is loaded from Selected volume (paths started with / ).␊ |
194 | ␉␉␉␉To put it simple, as an example, when installed to a usb stick, this booter will not search␊ |
195 | ␉␉␉␉for any files on the Extra folder of the volume were the system is installed!␊ |
196 | ␉␉␉␉Or in other words, the booter will only check the Extra folder on the booter volume␊ |
197 | ␉␉␉␉(paths started with bt(0,0) ), the usb stick in this example.␊ |
198 | ␉␉␉␉Anyway, /Extra paths can still be passed with the use of override keys!␊ |
199 | ␊ |
200 | ␉␉␉␉---------------//---------------//---------------␊ |
201 | ␉␉␊ |
202 | ␉␉Change: expanded this "new" search algo to dsdt.aml and smbios.plist.␊ |
203 | ␉␉␊ |
204 | ␉␉ Note: same override keys used.␊ |
205 | ␉␉␊ |
206 | ␉␉Motif: check Guidelines.␊ |
207 | ␉␉␊ |
208 | ␉␉␉␉---------------//---------------//---------------␊ |
209 | ␉␉␊ |
210 | ␉␉Change: tweaked the loading of override Boot.plist (loadOverrideConfig(), stringTable.c) according␊ |
211 | ␉␉␉␉the new search algo guideline: everything loads from Booter volume.␊ |
212 | ␉␉␉␉The search for this file was also extended to specific OS folders, to "emulate" the search␊ |
213 | ␉␉␉␉on Selected volume. Also added a verbose message to signal when user doesn't provide a␊ |
214 | ␉␉␉␉override plist.␊ |
215 | ␉␉␊ |
216 | ␉␉ Note: again, as far as i know, loading a override Boot.plist is not mandatory!␊ |
217 | ␉␉␊ |
218 | ␉␉Motif: payback for all the neurons i burned while i was not aware of override Boot.plist function!!␊ |
219 | ␉␉␉␉Not kidding :P␊ |
220 | ␉␉␊ |
221 | ␉␉␉␉---------------//---------------//---------------␊ |
222 | ␉␉␊ |
223 | ␉␉Change: reactivated config= key, included on loadOverrideConfig changes.␊ |
224 | ␉␉␉␉config=<file> loads override plist from specified path.␊ |
225 | ␉␉␊ |
226 | ␉␉␉␉e.g. config=/Extra/test.plist␊ |
227 | ␉␉␊ |
228 | ␉␉ Note: with the introduction of this key, all main files can now be overrided by the user.␊ |
229 | ␉␉␊ |
230 | ␉␉Motif: the key wasn't working anymore and it's useful.␊ |
231 | ␉␉␊ |
232 | ␉␉␉␉---------------//---------------//---------------␊ |
233 | ␉␉␊ |
234 | ␉Don't forget to check FileLoad.txt/FileLoad-trunk.txt for detailed info on file loading search paths␊ |
235 | ␉␉␊ |
236 | ␉␉---------------//---------------//---------------␊ |
237 | ␉␉␊ |
238 | - (rev 419)␊ |
239 | Change: started adding documentation, with the creation of a dedicated folder, doc-azi. It would get very␊ |
240 | ␉␉messy mixing these with main Chameleon documentation and as i want to keep things as clean as␊ |
241 | ␉␉possible on CleanCut, thought a separate folder would be better idea.␊ |
242 | ␉␉␊ |
243 | Motif: do i need to say? :) i thought so.␊ |
244 | ␉␉␊ |
245 | ␉␉---------------//---------------//---------------␊ |
246 | ␉␉␊ |
247 | - (rev 427)␊ |
248 | Change: removed Chameleon.xcodeproj.␊ |
249 | ␉␉␊ |
250 | Motif: it's not up to date and i need time to update it properly, at least on Chazi.␊ |
251 | ␉␉Will reintroduce it later in the process. It's also giving me problems with the svn client␊ |
252 | ␉␉when i update it; need to check what i'm doing wrong!?␊ |
253 | ␉␉␊ |
254 | ␉␉---------------//---------------//---------------␊ |
255 | ␉␉␊ |
256 | - (rev 460)␊ |
257 | Change: added a key to display some debug info, that can only be accessed via code edit.␊ |
258 | ␉␉Check http://forge.voodooprojects.org/p/chameleon/issues/12/ for history.␊ |
259 | ␉␉mm & attr, resolution specific info, are borrowed from autoResolution branch.␊ |
260 | ␉␉␊ |
261 | ␉␉DebugInfo=y enables display of debug info.␊ |
262 | ␉␉␊ |
263 | Note: Boot Banner(*)=n will override DebugInfo=y , disabling the display of this info.␊ |
264 | ␉␉Disabled by default.␊ |
265 | ␉␉␊ |
266 | Motif: just making this info easily accessible.␊ |
267 | ␉␉␊ |
268 | ␉␉---------------//---------------//---------------␊ |
269 | ␉␉---------------//---------------//---------------␊ |
270 | ␉␉␊ |
271 | - (rev 462)␊ |
272 | Change:␉creation of this project, replacing Chazileon as my work folder;␊ |
273 | ␉␉hence, Chazileon is now frozen until archival and deletion.␊ |
274 | ␉␉␊ |
275 | Motif: Chazileon (Chazi) has no svn history.␊ |
276 | ␉␉␊ |
277 | ␉␉---------------//---------------//---------------␊ |
278 | ␉␉␊ |
279 | - (revs 465 --> 467, 469 --> 471)␊ |
280 | Change:␉added AutoResolution patch, by Lebidou (autoResolution branch). The main intention of this␊ |
281 | ␉␉patch, is allowing native resolution after boot, even without graphics acceleration (qe/ci).␊ |
282 | ␉␉The "side effect" is that it also enables native resolution at boot prompt (Gui).␊ |
283 | ␉␉The con: doesn't work for all devices!!␊ |
284 | ␉␉␊ |
285 | ␉␉AutoResolution=y enables the patch.␊ |
286 | ␉␉␊ |
287 | Note: Obviously, it only works in Graphics Mode (Gui).␊ |
288 | ␉␉␊ |
289 | Note: resolution set on theme.plist is overriding the native one set by AutoResolution. For now the␊ |
290 | ␉␉possible solutions are, remove the boot resolution (boot_width, boot_height) from theme.plist␊ |
291 | ␉␉or add Graphics Mode=<native resolution> to com.appleBoot.plist.␉␉␉␉␉␉␉␉reminder: ""␊ |
292 | ␉␉␊ |
293 | Motif: ... mentioned above. Check the topic for more details:␊ |
294 | ␉␉http://forum.voodooprojects.org/index.php/topic,1227.0.html␊ |
295 | ␉␉␊ |
296 | ␉␉---------------//---------------//---------------␊ |
297 | ␉␉␊ |
298 | - (starting at rev 480)␊ |
299 | Change: added Meklort's Modules support, plus Kernel Patcher (Kpatcher) module.␊ |
300 | ␉␉␊ |
301 | ␉␉PatchKernel=y enables Kernel Patcher.␊ |
302 | ␉␉␊ |
303 | Note: Check Modules.txt for more info.␊ |
304 | ␉␉␊ |
305 | Motif: Testing Modules support.␊ |
306 | ␉␉␊ |
307 | ␉␉---------------//---------------//---------------␊ |
308 | ␉␉␊ |
309 | - (rev 520)␊ |
310 | Change: removed -legacy flag interaction with the booter and reverted 32/64 flags to the trunk way.␊ |
311 | ␉␉␊ |
312 | ␉␉Type arch=i386 to load i386 kernel architecture.␊ |
313 | ␉␉arch=x86_64 overrides i386 arch, if flagged on Boot.plist.␊ |
314 | ␉␉On Snow type arch=i386 -legacy to load i386 arch Legacy Mode.␊ |
315 | ␉␉␊ |
316 | Motif: don't want to contribute to confusion... and laziness ;)␊ |
317 | ␉␉␊ |
318 | ␉␉---------------//---------------//---------------␊ |
319 | ␉␉␊ |
320 | - (rev 524)␊ |
321 | Change: Added GraphicsEnabler module. Needs no introduction :)␊ |
322 | ␉␉Feedback is welcome.␊ |
323 | ␉␉Working as usual with my ATI Radeon X1300 openGL engine, doing the injection thing.␊ |
324 | ␉␉␊ |
325 | Newsflash: looks like it's raining modules over Meklort's branch :D␊ |
326 | ␉␉␊ |
327 | Motif: ---␊ |
328 | ␉␉␊ |
329 | ␉␉---------------//---------------//---------------␊ |
330 | ␉␉␊ |
331 | - (rev 526)␊ |
332 | Change: Added Memory detection module. Also needs no intro...␊ |
333 | ␉␉Working properly with my controler:␊ |
334 | ␉␉Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)␊ |
335 | ␉␉␊ |
336 | Motif: ---␊ |
337 | ␉␉␊ |
338 | ␉␉---------------//---------------//---------------␊ |
339 | ␉␉␊ |
340 | Note: latest changes need a call for ATTENTION; the bootloader install procedure is gaining␊ |
341 | ␉␉new steps! So far, we wre just playing with KernelPatcher module, which most people␊ |
342 | ␉␉don't use. Check Modules.txt for info on installing modules.␊ |
343 | ␉␉␊ |
344 | ␉␉---------------//---------------//---------------␊ |
345 | ␉␉␊ |
346 | ␉␉ Been a while since i last updated this file, as there were no major events to justify␊ |
347 | ␉␉doing so. There was however some activity, which deserves to be mentioned; resuming␊ |
348 | ␉␉the most relevant:␊ |
349 | ␉␉␊ |
350 | ␉␉- changed all the /Extra... paths to bt(0,0)/Extra... according to my approach to file␊ |
351 | ␉␉loading. I also spent time checking the code involved, which already revealed some BS␊ |
352 | ␉␉on this approach; the research isn't complete so, more news later.␊ |
353 | ␉␉␊ |
354 | ␉␉- (rev 592) disabled the limit to hide only foreign partitions. Did this mostly for␊ |
355 | ␉␉testing purposes as i don't have any "foreign" partition/s to hide. I understand the␊ |
356 | ␉␉logic behind this limit, but i just can't avoid to ask my self why?␊ |
357 | ␉␉␊ |
358 | ␉␉- studied and played a lot with AutoResolution code. No new functionality, just tweaked␊ |
359 | ␉␉the way it interacts with the booter, wich fixed some glitches and lost functionality,␊ |
360 | ␉␉mostly due to lack of maintenance to fit the changes on the trunk. Next on the plan it's␊ |
361 | ␉␉changing this code into a module, which i already started lining up.␊ |
362 | ␉␉Will add specific info soon.␊ |
363 | ␉␉␊ |
364 | ␉␉- (rev 614) Doubled the size of memory reserved for booter log, which is more than enough␊ |
365 | ␉␉to hold the full log generated booting with -f argument and turns out to also be a fix␊ |
366 | ␉␉for some problems related with -f arg boot.␊ |
367 | ␉␉Trunk'ed on rev 616.␊ |
368 | ␉␉␊ |
369 | ␉␉---------------//---------------//---------------␊ |
370 | ␉␉␊ |
371 | - (rev 625)␊ |
372 | Change: Added HPET module, another existing patch converted to the modules cause. This carries␊ |
373 | ␉␉some new code to force enable HPET on VIA chipsets, contributed by bogdan-x86␊ |
374 | ␉␉(http://forum.voodooprojects.org/index.php/topic,1596.0.html).␊ |
375 | ␉␉Also carries any notebook support added by Meklort.␊ |
376 | ␉␉␊ |
377 | Motif: ---␊ |
378 | ␉␉␊ |
379 | ␉␉---------------//---------------//---------------␊ |
380 | ␉␉␊ |
381 | - (rev )␊ |
382 | Change:␉␉␉␉template␊ |
383 | ␉␉␊ |
384 | Motif:␉␊ |
385 | ␉␉␊ |
386 | ␉␉---------------//---------------//---------------␊ |
387 | ␊ |
388 | ␊ |
389 | ␊ |
390 | Azimutz␊ |
391 | ␊ |
392 | ␊ |
393 | |